Construction of New District Police Office at Kottarakkara,Kollam Rural-Phase III ( DSR 2018)

Amount

CIVIL

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od199544/2021_2022 : Engaging Coolie

od199545/2021_2022 : Site levelling by using JCB

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od132060/2021_2022 : Providing and fixing powder coated Galvalium trafford sheet 0.35 mm thick up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.

12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

11.20.4 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

od196097/2021_2022 : Providing and fixing good quality imported Horizontal blinds window curtains 100 mm width of fabric with 100% polyester acrylic acid coating with alll connecting powder coated aluminium channells, clamp , hook , toin and iron plate (weight ) for operating etc complete and as per the direction of the engineer in charge , including cost conveyance of all materials and labour charges etc complete.MR

od196113/2021_2022 : Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over<br>backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

BORE WELL

23.1.2.1 : Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.Rocky strata including Boulders300 mm dia

23.3.3 : Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia

50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2

od72065/2021_2022 : Supply ,fixing and commissioning 2HP Compresser open well pump set model (crompton) with panel board

od72064/2021_2022 : Supply,conveyance,installation ,testing and commissioning of SUKRANTI LIFT/544 Kgs /3 Floors 3 Stops/ STAINLESS STEEL Car Cabin

APFC panel

od117850/2021_2022 : Supply, Instalation, Testing and Commissioning of 80kvr APFC panel<br>200A TPN ISO incomer.<br>8stage APFC relay with 2no 63A 3P MCB, 7no 32A 3P MCB<br>2no 15kvr cylindrical HD capactior,<br>3no 10kvr cylinderical HD capactior, 3no 5kvr cylinderical HD capactior, 1no 3kvr cylinderical HD capactior.<br>APFC full control wiring with auto-munal option.<br>For metering line indication and MFM<br>

Lightning protection

od133647/2021_2022 : Supply Providing and installation galvanized steel flat 30X3 mm<br>thick from earth electrode directly in<br>ground as required.HotDip GI strip,<br>corrosion resistant. Cross sectional area of<br>105mm square. According to<br>DINEN50164-2(VDE0185 part202) Meets<br>the requirements<br>VDE0185/305(IEC62305) Zinc coating:<br>500g/m square (70microncoating).Should<br>be tested and use exclusively for lightning<br>protection earthing system and ring<br>equipotential bonding.

od133648/2021_2022 : Installation charges for Earthing<br>system

od133649/2021_2022 : Installation charges for External<br>lightning protection system

od133651/2021_2022 : Supply METER EARTHING: C-Bar 3/4" dia, UL<br>listed, 3000 mm long + 22.6 Kg GC+ and<br>clamp for termination(DEHN MAKE )

od133652/2021_2022 : Supply and Providing galvanized steel flat 30X3 mm<br>thick from test joint to earth electrode<br>.HotDip GI strip, corrosion resistant. Cross<br>sectional area of 105mm square.<br>According to DINEN50164-2(VDE0185<br>part202) Meets the requirements<br>VDE0185/305(IEC62305) Zinc coating:<br>500g/m square (70microncoating).Should<br>be tested and use exclusively for lightning<br>protection earthing system and ring<br>equipotential bonding.

od133653/2021_2022 : Supply Providing test joint for connecting round<br>aluminium conductor and flat GI<br>conductor, UNI disconn. clamp with<br>intermediate plate f. round and flat cond.,<br>StSt UNI disconnecting clamp ,For<br>connecting down conductors to the earth<br>entries With intermediate plate for Rd and<br>Fl conductors Material: StSt<br>Clamping range Rd / Rd: mm Clamping<br>range Rd / Fl: 8-10 / 30 mm<br>Standard: EN 62561-1 (DEHN MAKE )<br>

od133654/2021_2022 : Supply HORIZONTAL RUN Falt roof Round wires<br>- DEHNalu wire, 8 mm / 50 mm², AlMgSi,<br>semi-rigid Round wire according to DIN<br>EN 62561-2 (VDE 0185 Part 202) for use<br>as air-termination system or down<br>conductor in lightning protection<br>systems.Diameter Ø conductor: 8 mm<br>Cross-section: 50 mm2 Material: AlMgSi<br>Materi.Conductor holder of type KF2<br>(loose) for flat roofs Roof conductor holder<br>for flat roofs for fixing round conductors<br>on flat roofs(DEHN MAKE )<br>

od133655/2021_2022 : Supply HORIZONTAL RUN Tile roof Round<br>wires - DEHNalu wire, 8 mm / 50 mm²,<br>AlMgSi, semi-rigid Round wire according<br>to DIN EN 62561-2 (VDE 0185 Part 202)<br>for use as air-termination system or down<br>conductor in lightning protection<br>systems.Diameter Ø conductor: 8 mm<br>Cross-section: 50 mm2 Material: AlMgSi<br>Materi.Conductor holder of StSt tile Roof<br>conductor holder for Metalic roofs for<br>fixing round conductors on tile<br>roofs(DEHN MAKE )

od133656/2021_2022 : <br>Supply Universal connector, Al Universal<br>connector<br>For cross connections, T connections and<br>parallel connections<br>Material of clamp: Al<br>Clamping range Rd: 8-10 mm<br>Screw: M10 x 35 mm<br>Standard: EN 62561-1 (DEHN MAKE )<br>

od133657/2021_2022 : Supply VERTICAL RUN : Round wires - DEHNalu<br>wire, 8 mm / 50 mm², AlMgSi, semi-rigid<br>Round wire according to DIN EN 62561-2<br>(VDE 0185 Part 202) for use as airtermination system or down conductor in<br>lightning protection systems.Diameter Ø<br>conductor: 8 mm Cross-section: 50 mm2<br>Material: AlMgSi Materi.Conductor holder<br>for flat roofs Roof conductor holder for flat<br>roofs for fixing round conductors on flat<br>roofs(DEHN MAKE )<br>

od133658/2021_2022 : Supply AIR TERMINAL - 1500 mm air terminal<br>with accessories: Air-termination rod<br>10/16mm, total length: 1500 mm, Al Airtermination rod for protection of roofmounted structures, Holder For airtermination rods Ø 10/16 mm (DEHN<br>MAKE )

od134196/2021_2022 : Installation charges for External<br>lightning protection system

Electrical works

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

2.3.8 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator2+12 way, Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

od134264/2021_2022 : Supply, installation testing and commissioning of Energy efficient 18 W LED tube fittings (Govt approved and reputed brands like Philips or equivalent) including lamp wih all accessories and giving connection with 3 core PVC insulated and sheathed round Cu flex wire on wall/ceiling conforming to relevant ISS etc. as required.

od134266/2021_2022 :  Supply installation testing and commissioning of 380 mm sweep, 900 rpm Heavy Duty Exhaust fan working on 230 V A/C

od208159/2021_2022 : Supply and installing BLACK METAL OUTDOOR WALL LIGHTS -GULMORG-OUTDOOR- SMALL - INCLUDED BULB or equivalent including all accesories as required for complete installation

od208161/2021_2022 : Supply and fixing 9 W LED bulb make philips/govt approved reputed brand as required.

od208162/2021_2022 : Supply and laying 8swg bare copper conductors of the following size laid 0.6M below ground level including excavating trench of suitable size and refilling as required.

od208163/2021_2022 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.<br>high speed ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C

90.12.1.34 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

90.12.2.23 : Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)

90.12.6.34 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.2.24 : Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 185 sq. mm

9.3.24 : Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 185 sq. mm

8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od134714/2021_2022 : Supplying 150 SQMM 3 Core 11 KV HT XLPE Aluminium Armored Cable

od158590/2021_2022 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:<br>150 sq. mm

od158591/2021_2022 : Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials(, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:150

od159780/2021_2022 : Supply ,installation ,testing and commissioing of CAT6 patch cord 1 mtr. make- dlink or equivalent

od159781/2021_2022 : Supply projector HDMi cable

od159789/2021_2022 : logitech wireless mouse with usb nano receiver optical tracking

od193768/2021_2022 : Supplying and fixing 32 inch full hd philips TV

od193763/2021_2022 : Supplying and drawing FINOLEX (RG6 3+1)CABLE P<br>

od193769/2021_2022 : Supply,installation,testing and commisioning of following 4X4 BOX etc. complete as required.

od193770/2021_2022 : Supply and providing 4U cabinet of approved make powder coated with glass panel front door including giving connection etc complete as required.

od159791/2021_2022 : Supply,installation,testing and commisioning of following DC PIN<br>GREEN etc. complete as required.

od159792/2021_2022 : Supply,installation,testing and commisioning of following BNC connector<br>MTC etc. complete as required.

od159793/2021_2022 : Supply,installation,testing and commisioning of following SMPS 12V 10A<br>12V 10A etc. complete as required.

od159795/2021_2022 : Supply, installation, testing and commissioning of Input/Output LAN Point Socket including all cost and labour charges etc.

od159796/2021_2022 : Supply and fixing DLP-S TRUNKN WIT CVR100X50MM2M (Legrand or equivalent)

od159797/2021_2022 : Supply & Providing 2Mtr Cat 6 patch chord of approved make.<br>

od159798/2021_2022 : Supply and fixing casing and capping of reputed brand (Legrand/ precision/ pressfit) with ISI mark. 20 mm

od193755/2021_2022 : SUPPLY AND FIXINGDS4 4TB SURVEILLANCE HDD<br>WD BRAND, SURVEILLANCE HDD

od193756/2021_2022 : SUPPLY AND FIXINGDS-2CE5ADOT-IRPF<br>2MP DOME CAMARA

od193757/2021_2022 : Supply and fixing 2CE5AHOT-IRP<br>5MP CAM WITH MIC, HIKVISION<br>BRAND

od193758/2021_2022 : SUPPLY AND FIXING IDS-7216HQHI-M1/S<br>UPTO 4MP CAM SUPPORT,<br>16CHANNEL DVR, HIKVISION BRAND<br>

od159773/2021_2022 : Supply,installation,testing and commisioning of Ast 520 IP Phone

od159774/2021_2022 : Supply,installation,testing and commisioning of Dinstar FXO 12 (8 & 4) Port

od159775/2021_2022 : supply ,providing, testing and commissioing of stTECS Ext. IP PBX solution with <br>web based in built- Receptionist Console<br>*astTECS custom made Servers astTERISK based IPPBX <br>software, Centralized administration ,IVR (9 levels & 9 Sub levelsEnhanced security to ,protect the system,Time Based Routing ,Voice Recorder call detail report and Many or equivalent

od194921/2021_2022 : Supply, conveyance, installation, testing and commissioning 2.5 mm thick - Class - B - 11 KV ---As per IS 15652-2006 specifications.

od200748/2021_2022 : Supplying and fixing Samsung 108 cm (43 inches) FHD FULL Smart 20 w LED TV USB movie

od200752/2021_2022 : Supply, conveyance, installation, testing and commissioning of bollard Outdoor garden Light | Waterproof 2 feet or r equivalent

od200753/2021_2022 : Supply, conveyance, installation, testing and commissioning of NOMA Outdoor Street Light | Waterproof Outdoor Lamp Post Light with Triple-Head Design for Backyard, Patio, Garden,or equivalent

od200754/2021_2022 : Supplying and fixing porcelain connector including all charges.

od200755/2021_2022 : Supplying and fixing sintex box including all charges.

od200756/2021_2022 : Supply and Laying 6 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE

7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

1.34 : Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

od209651/2021_2022 : Supply and fixing of 3w WH outdoor wall light LODARCS-3D 3000K .including all accessories as required for complete installation (wipro/luker/equivalent)

ups system

od159776/2021_2022 : Supply, installation,  and commissioning of 15kva UPS Three phase in and out.  with indoor (IP20) with surge protection system with SMF battery of reputed approved make exide/quanta/Numeric), Input pf >0.99, input THDi <5 % without use of any external filters, Built in isolation transformer at input, to have transformer output even in bypass mode, double conversion technology with input voltage range 320-460 @ full load, 50Hz Three Phase, output 400V, 50Hz Three phase, It shall be 100% generator compatible, with Efficiency > 92% and output power factor .9 ( 15kVA= 13.5kW), Eco mode Efficiency 98% and including all accessories etc as required. The acoustic noise at 1m of the system should be <75dB.The system shall comply Type Test certificates and relevant IS standards. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic bypass builtin. The system shall have IGBT rectifier and inverter. warranty 2 years for UPS and batteries. Approved brands Numeric-Legrand/APC/GE/ Min: VAH 15600

od159777/2021_2022 : Supply, installation,  and commissioning of 10kva UPS Three phase in and out.  with indoor (IP20) with surge protection system with SMF battery of reputed approved make exide/quanta/Numeric), Input pf >0.99, input THDi <5 % without use of any external filters, Built in isolation transformer at input, to have transformer output even in bypass mode, double conversion technology with input voltage range 320-460 @ full load, 50Hz Three Phase, output 400V, 50Hz Three phase, It shall be 100% generator compatible, with Efficiency > 92% and output power factor .9 ( 10kVA= .9kW), Eco mode Efficiency 98% and including all accessories etc as required. The acoustic noise at 1m of the system should be <75dB.The system shall comply Type Test certificates and relevant IS standards. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic bypass builtin. The system shall have IGBT rectifier and inverter. warranty 2 years for UPS and batteries. Approved brands Numeric-Legrand/APC/GE/ Min: VAH 10080

providing air conditioner to rooms

od193765/2021_2022 : Supply, conveyance, installation, testing and commissioning of LG 1.5 Ton 5 Star CN Series MS-Q18CNZA Inverter Split AC

od193766/2021_2022 : Supply, conveyance, installation, testing and commissioning of LG 2.0 Ton Dual Inverter 5 Star Copper JW-Q24WUZA (R-32) Window AC with Wi-Fi (White)

od193767/2021_2022 : Supply, conveyance, installation, testing and commissioning of V-Guard Crystal Nano Voltage Stabilizer (Black)

NAMSHAD A.

Bidder Name

NAMSHAD A.

MOHAMMED SAKKEER K