Tender ID

Karnataka

AOC

Works

Buildings

Construction of One Class Room to GHPS at Gunderi Kaval in Holalkere Taluk.

Public Works Department

PWD Division Office Chitradurga | Chitradurga, Karnataka

Amount: ₹12.1 LCloses: 15 Jul 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published5 Jul 2025
Closed15 Jul 2025
Awarded—

Bids

1 Bid15 Jul 2025

#	Company	Amount	Status
1	NAGARAJA P ₹10.9 Laccepted-aoc	₹10.9 L	accepted-aoc

Tender Value

₹12.1 L

EMD Value

₹15,200

Closing Date

15 Jul 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer P.W.D.

Office Number

Work Description

Construction of One Class Room to GHPS at Gunderi Kaval in Holalkere Taluk.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT22202

Reference Number

PWD/2025-26/BD/WORK_INDENT22202

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredThe Tender should be a KPWD Registered Class-IV and above contractor Attach Registration Certificate

RequiredAnnual Turnover Certificates of last 5 years i.e. period of 2020-21 to 2024-25 Attach Balance sheets & Profit & Loss account statements indicating the contract receipts related to civil engineering construction works duly certified by the chartered accountant.

RequiredTo qualify for Award of this contract, each Tenderer should have in his name in the last five years, satisfactorily completed as prime contractor, at least Any Construction work of value not less than Rs. 3.03 lakhs. Attach Work done Certificate issued by competent authority of rank not less than Executive Engineer.

RequiredThe requisite E.M.D. as prescribed in KPPP portal should be submitted by the contractor.

RequiredTenderers address and contact details

RequiredStatement showing the Existing commitments and ongoing works, in the prescribed proforma as per 1.3 A of Section 3 of Qualification information should be furnished.

RequiredStatement showing Details of works for which tenders are already submitted in the prescribed proforma as per 1.3 B of Section 3 of Qualification information should be furnished.

RequiredReserved Category Certificate Attach Related Scheduled Tribes certificate issued by competent Authority

RequiredIf the contractor is a Firm, then all the partners of members of the firm shall belong to the Scheduled Tribes as the case may be Attach Relevant Document issued by competent Authority

RequiredThe contractor belonging to the Scheduled Tribes shall be domicile of the state of Karnataka for more than 10 years. Attach Relevant Document issued by competent Authority

RequiredGST Declaration Certificate

Eligibility Criteria

Estimate rates are excluding GST as per Common SR 2023-24 CONTINUED FOR 2024-25 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24(As per circular from Govt. of Karnataka no.12/2024 Bangaluru Dt:09.08.2024). Therefore, amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Hence the bidder has quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

Tenders from Joint ventures are not acceptable.

The contractor shall submit the details of technical staff employed by him.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement portal

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Govt orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts Labour, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall beexecuted as directed by the Engineer in charge of the work.

Further particulars, if any, required by the Contractor can be had from the office of the concerned Executive Engineer, PWD Division, during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all the necessary original documents mentioned above to the Executive engineer

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the Standard Tender documents KW-1 K.P.W.D. and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1Percent of the bill amount will be deducted towards constructions labour welfare fund

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Materials like bitumen steel cement etc required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work

Reserved Category Certificate Attach Related Scheduled Tribes certificate issued by competent Authority

If the contractor is a Firm, then all the partners of members of the firm shall belong to the Scheduled Tribes as the case may be Attach Relevant Document issued by competent Authority

The contractor belonging to the Scheduled Tribes shall be domicile of the state of Karnataka for more than 10 years. Attach Relevant Document issued by competent Authority

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹15,200

Important Dates

Last Activity

15 Jul 2025

Published

5 Jul 2025

Download Ends

14 Jul 2025

BOQ Preview

•

Construction of Building-Construction of One Class Room to GHPS at Gunderi Kaval in Holalkere Taluk.

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing M.S. Tubular frames for doors, windows,

•

ventilators and cupboard with rectangular/ L-Type sections, made of

•

1.60 mm thick M.S. Sheet, joints mitred, welded...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with p...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- Including cost and conveyance of a...

•

Printing New Letter and Figures of any Shade - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Ref...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Electrification-Construction of One Class Room to GHPS at Gunderi Kaval in Holalkere Taluk.

•

Supplying heavy gauge PVC conduit pipe . mmdia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The condu...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

•

Supplying and fixing PVC/metal conduit Deep junction box-19/20mm deep Junction box ---- Including cost and conveyance of all materials labor HOM of machineries equipment lead and lift loading and unlo...

•

Supplying And Fixing "S" Hook made out of 14mm dia M.S. Rod. ---- Including cost and conveyance of all materials labor HOM of machineries equipment lead and lift loading and unloading charges transpor...

•

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-3...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5 Sqmm (Phase&Neutral) & 1x1.0sqmm (Earthwire) FRLS multistrand P...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch ---- Including cost and conveyance of all materials labo...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- Including cost and conveyance of all materials labor ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- Including cost and conveyance of all materials l...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6 Amps lamp holder ---- Including cost and conveyance of all materials labor HOM of machineries equipment...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.-80/90mm ---- Including cost and conveyance of all materials labor...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.-110mm ---- Including cost and conveyance of all materials labor H...

•

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220-240V at 5...

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiv...

•

Fixing all types and all capacities of fluorescent I false ceiling I spot light I CFL I LED fittings indoor on the wall/ ceiling I rafters I girders using 23/0.0076" twin twisted PVC insulated wires, ...

•

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 12"x12"...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps ---- Including cost and conveyance of all materials labor HOM of mach...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I. C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit sho...

•

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board to with supplying and fixing 5A. ceiling rose, necessary length of...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374 1979 and with double ball bear...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GST Declaration.docx

Others - GST Declaration • 0.01 MB

22202 kw 1 bid ST.doc

Tender Document • 1.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NAGARAJA P

₹10.9 Laccepted-aoc