SPL REPAIR TO BLDG NO T-21 (DAGGER VILLA) GUEST ROOM AND PROVN OF GUARD ROOM WITH TOILETS AND BATHROOMS AT GULMARG AND PROVN OF INSTALLATION OF GEYSERS FOR BARAMULLA UNDER GE 969 EWS

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard and dense soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soil, complete all as specified and as directed.

All as per above item No. 2 but exc 1.5m depth to 3.00m and getting out in hard/dense soil, complete all as specified and as directed.

M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete, complete all as specified and as directed.

Use & waste of formwork to rough finished surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc, complete all as specified and as directed.

M&L for RCC M-30 (design mix) using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etc, complete all as specified and as directed.

Use & waste of formwork to square or rectangle shape and fair finished surfaces of concrete, to sides of pillars, post , struts etc, complete all as specified and as directed.

M&L for RCC M-30 (design mix) using 20mm graded aggregate as in columns etc, complete all as specified and directed.

Formwork to soffits of fair finished suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) etc, complete all as specified and as directed.

M&L for RCC M-30 (design mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Use & waste of Formwork finished fair to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

M&L RCC (design Mix) M-30 (20mm grade aggregate in beam bressummers, limtels over 1.5m span etc, complete all as specified and as directed.

M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed.

Removing of excavated soil not exc 50m and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4), complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4), complete all as specified and as directed.

M & L Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note - W P C shall be measured and paid separately).

M & L Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement on ceiling surfaces, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls , applying two coats of distemper oil emultion, white ot tinted, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings , applying three coats of white wash, complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exce 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base/ flooring, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 15mm thick rendering in cement mortar (1:4) and jointed, complete all as specified and as directed.

M & L Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed.

M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar (1:4), complete all as specified and as directed.

S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed.

M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing, complete all as specified and as directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as etc, complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

All as per above item No. 35 but except sheeting, complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle boarde with commercial veneering on both faes. The size of rail and stile (second class hardwood) as per IS-1003 (part-I), kiln seasoned and chemically pressure treated , complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b)

Preparation of newly or previously untreated wooden surfaces of any description over 10 cm width or girth and priming with pink primer ovder two coats of synthetic enamel paint on wooden surfaces, complete all as specified and as directed.

S&F 300mm long long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alouminium alloy and fixed, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average wide of aperature 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and as directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.

S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010, complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item, complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed.

S & F Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed.

S & F Butt hinges, 50 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed.

S & F 150mm long aluminium anodised, barrel tower bolt ISI marked, complete all as specified and as directed.

S&F 100mm long aluminium anodised, barrel tower bolt ISI marked, complete all as specified and as directed.

S&F 150mm long aluminium anodised cast type alumiinium handle SI marked, complete all as specified and as directed.

S & F 100mm long aluminium anodised cast type alumiinium handle SI marked, complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe, complete all as specified and as directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed.

S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore, complete all as specified and as directed.

S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs, complete all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and as directed.

S&F 100mm bore PVC (SWR) 'T 'any radius, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed.

S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n.exc 25 Sqcm , complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm , complete all as specified and as directed.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc, complete all as specified and as directed.

S&F Vitreous China wash basin, wliile, flat back, size 580x450mm (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets etc, complete all as specified and as directed.

S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed.

S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane, complete all as specified and as directed.

Supply only integral water proofing compound.

S&F 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes of 16mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

All as per above serial item No. 76 but 20mm outer dia, complete all as specified and as directed.

Lagging to 20mm bore pipe exposed PPR tubing all around (incl provisions of lagging on pipe fitting ie., unions, elbows, nipples, tees etc) with 40mm thick bonded mineral wood performed 'SNAP ON' pipe section of density 144 Kg/Cum confirming to IS-9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01 mm aluminium foil, complete all as specified and as directed.

M&L for Bib taps, cast copper alloy chrominium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F Chromium plated shower roses 125mm dia with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed.

S&F Stop valves, cast copper alloy but fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore of pipe, complete all as specified and as directed.

S&F 10 User LLDPE septic tank conventional designed to carry sewae and sludge water, excavation in any type of soil,PCC 1:4:8 below foundation, vent shaft connection etc, complete all as specified and as directed.

Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth, complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed.

M & L 1:2:4 types B-1 (using 20 mm graded stone agg) as in coping etc, complete all as specified and as directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed.

M&L for for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished surfaces even and smooth, complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc, complete all as specified and as directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed.

S&F 20mm bore medium graded Gl tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed down both ends for iron pipe or unions and fixed complete including taking down of old one suitable for 20mm dia bore, complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L for 6 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc, complete all as specified and as directed.

M&L for second class softwood 12 mm thick planed on both side and edges tongued and grooved or rebated and joints are chamfered one side and the boardind is matched, wixed with nails in walls including preparing the surface and applying french polish over a coat of wood filler in new work with two or more coats complete all as specified and directed by Engr-in- Charge.

M&L for 12 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc, complete all as specified and as directed.

S&F Decorative wooden tiles of size 300x300x10mm thick of second class softwood, with fixing on ceiling of nails and glue/ fevicole over a 12 mm Plywood, design and shade as approved by Engr-in-Charge, complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each and offered as credit, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed.

S&F Powder coated Anodised aluminums frame for sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc, complete all as specified and as directed.

S & F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement etc, complete all as specified and as directed.

M&L for 19 mm Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, complete all as specified and as directed.

Supply and fixed 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.

S&F extruded aluminium alloy handles,100mm fabricated type anodized, complete all as specified and as directed.

S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed, complete all as specified and as directed.

S&F Sheet glass 5.5 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position, complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed.

M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes, complete all as specified and as directed.

S&F in repairs Single piece WC with UF soft closet, seat cover , hinges, fixing acessories including flushing cistern sizee (370x690x795mm) includibg S trap 300mm, health faucet ad jet spray, complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed.

Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30m x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM thick in CM 1:4 in wall/ceiling and make surface good as directed by Engr-in-Charge.

M&L Point wiring complete with FRLS 1100 Volts grade, 4 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 4 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM thick in CM 1:4 in wall/ceiling and make surface good as directed by Engr-in-Charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed

S&F in repair Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S&F in repair Modular switch single pole, one way 6 amps 1 module 240 volts, complete all as specified and as directed

Supply & Fixing in repair Modular Socket, 6A - 2/3 pin combined 2 module 240 V,complete all as specified and as directed.

Supply & Fixing in repair Modular Switch socket Combination 16A, 6 pin, 3 module 240 V,complete all as specified and as directed.

Supply & Fixing in repair Modular White cover plate with frame (inner and outer plate), 8 module,complete all as specified and as directed.

Supply & Fixing in repair Lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings,complete all as specified and as directed.

Supply & Fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 Amp to 32 Amp, in the MCB DB Complete with connection testing and commissioning,complete all as specified and as directed.

Supply & Fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 63 Amp SPN in the MCB DB complete with connection testing and commissioning,complete all as specified and as directed.

Supply & Fixing in repair MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection,single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting,complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity TPN 100 Amp in the DB complete with connection testing and commissioning,complete all as specified and as directed.

Supply & Fixing in repair TPN DB 4 way sheet metal enclosure TPN 450 volts, 50 Hz, with IP-42 protection,Double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting,complete all as specified and as directed.

Supply & Fixing in repair LED bulb thread/pin type of capacity 10 Watt,complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size,complete all as specified and as directed.

S&F Flush Type Socket outlet 6 Amps,complete all as specified and as directed.

S&F Switch socket combination 5 pin 15 Amp flush type, complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and directed.

S&F in repairs Distribution Board, SPN 8 Way, Single door complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA C' curve miniature circuit breaker (MCB) of capacity SPN 32 Amp to 63 Amp current carrying capacity in the MCB DB, complete all as specified and as directed.

Supply and Fixing 240V, 10 KA 'B' curve miniature circuit breaker of (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning.

S&F LED Lamp 15 W, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F LED light fitting 1X9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, comlpete all as specified and as directed.

S&F in repair Sub main wiring using two runs of single core PVC insulated cable with multistranded 1100 volts copper conductor of sizes 6.0 Sqmm through existing/ new in wall with PVC conduit including Copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. Note: Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with blades, and frame and louver, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16Sqmm 2 core laid in trenches or passing through pipe including connnecting with suitable lugs, glands, nuts and bolts and testing, complete all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note : The punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection, complete all as specified and as directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A, complet all as specified and as directed.

Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade (main cable : 2 runs of 2.5 Sqmm main cable) alongwith one run of single core 2.5 Sqmm single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing drawn through PVC concealed conduit, complete all as specified and as directed.

Note:- Schedule of credit Rs 39,654.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Nationalconstruction (BID ID -3469776)

M/S Manzoor and Co (BID ID -3460051)