REPAIR MAINTENANCE OF WATER SUPPLY AND ELECTRIC INSTALLATION INCL MISC WORK B AND R AT ALHILAL MIL STN

Amount

SCHEDULE 'A' PART-I Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.

S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed..

S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.

S&F 125 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size aluminium alloy handles, farbicated type, anodised complete all as specified and directed.

S&F 250 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills,gratings,etc,with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars;barred iron doors;ladders ;framed balusters;walk ways;railings;framedwork of water tanks andsimilar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L rendering 15mm thick plaster in cement mortar(1:4) on fair faces of brick work/stone masonary, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick plaster in cement mortar(1:6) on fair faces of brick work/stone masonary, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of newly plastered or unplastered surface of wall and applying two coats of oil bound distemper over a cost of wall care putty 2 to 3mm complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L plain cement concrete, 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

Dismantling timber scantlings 40Sq.cm and over in section, in framed work complete all as specified and directed.

Demolition trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

S&F anodised aluminium door/window shutter of any type (Two/three track) Sliding type aluminium powder coating 50 micron and aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, tower bolt, hinges, door stopper, anodised aluminium snap beading screws egc. complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. including taking down old unserviceable chowkhat complete all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat and removing unserviceable materials,debris and rubbish to distance not exceeding 100m complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaace 350mm x 250mm x 7mm/450mm x 350mm x 7mm/ 450 x 300 x 7mm/ 600 x 300 x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) 25mm thick as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards,any thickness, including cover fillets, complete all as specified and directed.

S&F Hi steel clip in false ceiling system plain/perforated with steel/aluminium tiles (600x600mm) manufactured out of 0.50mm thick polister coil coated galvanized steel having 120/180 grams zinc coating or 0.70mm aluminium powder coated with 0.50 micron polyester paint in AA5050, AA3105 or AA1050 aluminium alloy. Tiles shall have square or beveled edge, coil coated steel tiles shall have 20 micron polyester coated finished or on the front side back side coat of 5 micron alkyd primer, two side of each tile are raised and piped and stopped to ensure positive engagement in to spring clip in profile allowing for demounting of individual tile i.e. rigid suspension system consist of row of 0.50mm galvanized steel clip in profile of 38mm installed at 600mm centre to centre a spacing to support the tiles suspension angle are suspended from roof structure/truss by GI ceiling bracket these are jointed clip profile by hold on clamps. The tiles/planks are held in place by pressuring clips. In the flexible system hanger and butter fly clip replaced the suspension angle wall angle shall be of size 24mm x 24mm x 0.40mm thick made of coil coated steel or aluminium matching the colour of tiles including necessary scaffolding all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons of laid bedded and pointed in any mortar etc. complete all as specified and directed.

M&L 75 thick PCC M-10 (Nominal Mix), type C-1 (using 20mm crushed stone aggregate) as in sub base of interlocking tiles/chequered tile complete all as specified and directed.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 50 mm thick layer of sand cushioning, complete all as specified and directed .

M&L 25mm thick fine aggregate (sand) for concrete surface complete all as specified and directed.

M&L coloured chequered cement concrete tiles, machine pressed, factory made of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

SCHEDULE 'A' PART-II Taking down crefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5/6 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLSH, PVC insulated unsheathed heavy duty cable 1100 volts including continious earth wire of size 1.5 Sqmm copper conductor multistranded FRLSH, PVC insulated (unsheathed) drawn into concealed rigid non-metallic PVC conduit med grade ISI marked not less than 20mm wide of 1.8mm wall thickness ISI marked including modular GI sunken flosh box (modular GI flush boxes of any way i.e. 1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed for the following:- (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed. Note: Quoted rates deems to be included the cost of modular plate (1 to 8 way) for mounting switches, sockets & regulators as required at site.

All as per the description of serial item No 53 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

All as per the description of serial item No 53 here-in-before but one 5 pin socket outlet, 5 amps, independent complete all as specified and directed.

All as per the description of serial item No 53 here-in-before but for one 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

S&F modular switch 1 way 6 A,1 module complete all as specified and directed.

S&F modular socket, 6A-2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket, 6A and 16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ding dong bell musical type AC 230 volt single pole complete all as specified and directed.

S&F modular bell push 6A 1 module complete all as specified and directed.

S&F fan regulator 120W-2 module complete all as specified and directed.

S&F LED bulb 9 watt complete all as specified and directed.

S&F LED light fitting 1 x 36/33 Watt, 2ft x 2ft ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed. Note: Contractor is responsible for making necessary arrangements such as Scaffolding of suitable size for fixing of ceiling lights at different height and location at site. The rate for making arrangement of Scaffolding and manpower required for the above work is deemed to be included in the quoted rate. Make: Havells Cat Part No. PLANO2x2PLR36WLED840S/Bajaj Cat part No. BZRSQL 36W LED GX WH/Philips Cat part No. RC375B LED 865/840 PSU W60L60 52WH

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Make Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/ Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat Part No. WT202WLED 10S

Disconnecting and taking out existing unserviceable light fitting of any description and in any position on poles and S&F 20W LED post top lantern complete with accessories to be fixed on pole/wall including connecting the fitting to control switch at the bottom of the pole with using 2.5 sqmm two single core PVC insulated and unsheathed copper conductor cable complete all as specified and directed. Make: Bajaj Cat Part No BGCT W4 LED WW/Crompton Cat No PTH-20 CDL/Havells Cat Part No. RUBYPT25WLED830SSYMTOPC

S&F 200mm sweep exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 12, copper winding, 5 star rated complete all as specified and directed. Make: Bajaj, Compton, Havells or equivalent make as approved by GE. Note: Old unsv exhaust fan to be deposited in MES Store yard.

S&F 1200 mm sweep ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make :- Orient Model 1200mm I-1TOME/ Crompton eSave 50/ Havells Fusion 50.Note: Old unserviceable ceiling fan to be deposited in MES store yard.

S&F new wall mounted fan 400mm sweep with oxcillating arragement, inbuilt speed control and ON-OFF switch arragement complete all as specified and directed. Make: Bajaj, Crompton, Havells and equivalent make as approved by GE. Note: Old unsv wall mounted fan to be deposited on MES store yard.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing strip 25/4mm by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board / electric equipment / pole / lightning arrestor / HT/LT equipments / GODO switch etc, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.

Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing strip upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

M/S THAKUR ENTERPRISES

VIVEKA ENTERPRISES