Strengthening of Street lights, Hight mast lights And Park lights in Sector-11,12 and Vill-Jhundpura, Noida

Supply, Installation, Testing & Commissioning of Standrad 4 Mtr(Above Ground) hot dip galvanized(Granding of Galvanisation average 70 micron or better as per IS2629(AOR) Make:- Bajaj/ GE/Philips/Valmont/Transrail

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect..P.S. No-641 Make:- Bajaj/ GE/Philips/Valmont/Transrail

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. E/I. UPPWD-2018 PS No. 1423 Catt-AAA Make:-Bajaj/Philips/Crompton/Surya/LT Light/Havells

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. UPPWD-2018, PS-1421 CAT-AAA Make:-Bajaj/Philips/Crompton/Surya/LT Light/Havells

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor platesetccomplete in all respect as per direction of E/I. UPPWD-2018, PS-651 Make:- Bajaj/ GE/Philips/Valmont/Transrail

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection. UPPWD-2018, PS-1455 CAT-AAA Make:-Bajaj/Philips/Crompton/Surya/LT Light/Havells

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Complete in all respect as per direction of E/I. UPPWD-2018 PS - 725B

S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No. 501) UPSR -2018 Make : Gloster/Universal/ Polycab/ Havells/ Diacab/Grandley/KEI a)- 16 sq. mm 4 core

b)- 16 sq. mm 2 core

c) 50 Sq.mm. 3.5 Core