BID DOCUMENTS FOR PROPOSED OFFICE BUILDING RENOVATION WORK AT NADIAD MUNICIPAL CORPORATION AT NADIAD_2ND CALL

Total Amount:- 1319904.09

Sr No. Description Quantity Unit Rate Amount

Demolition of Brick work and stone masonry including stacking of serviceable

1.00 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 2.10 Cmt 536.09

Dismantling Kitchen sink or santtary fittings like wash basin . W.C. pan Indian and European

2.00 type, flushing tank etc. including stacking the materials with all lead and lift. 1.00 Each 394.51

Brick work using common burnt clay building bricks having crushing strength not less than

3.00 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 0.36 Cum 4051.78

Sandwitch platform : Providing, fixing and construction of sandwitch type 25mm thick

double polished Granite of uniform size and colour for Kitchen/Pantry/Counter etc in floor,

dado or fascia up to 1.8mt long including necessary cement mortar bedding in cement

4.00 mortar 1:2 of required thickness. Kota shall be fixed over 25mm thick rough kota stone 0.56 Sqm 2779.41

bottom, cement joints and pointing as specified with necessary making of edges,Including

vertical kota support as per design, polishing as per instruction of Engineer-in-charge

Providing and laying Mirror polished Machine polished Green Marble stone slab 18mm

(Average ) thick for doors & windows sill & Jams clading as per design including full

moulded round front steps & 1cm nosing & necessary groove on trads of steps ;laid on

20mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand ) jointed with gray cement sluury

including rubbing and polsihing etc. complete.for Doors / windows sill & jams clading.

Providing Material & Labour charge for making laminate finish Flush Door (finished size of

door is 40 mm) of size 975 mm x 2400 mm considering waterproof flush door sheet of

mm thkness covered both side by 1.0 mm thick Laminate supprted by SS -314 finish

hinges. All exposed framing of 65 mm x12 mm made by teak wood bidding complete with

6.00 polish. Finishing with all necessary hardwares like handles, conceal mortise locks, cylinders 2.10 Sqm 4057.17

with 6 nos of keys, stopers,tower bolt,MS nails, SS-314 screws etc. as per details given in

drawing and as per instructions of Architect/Engineer In charge. Please see the Attached

Make List for Apporoved Makes.

Providing and fixing Prelam PVC sheet wall paneling of thickness 5mm consisting of

panels having size 1220 x 2440 mm stuck on inner frame work of 50mm wide strips of 5mm

thick PVC sheet. The strips should have in their center a grove of 6mm width asnd

1mm depth for sinking the had of the screw using to fix the strips of the wall and should

be placed vertically at equal intervals of 10” center to center. The PVC strips shall be

fixed to the wall using 65mm long

M.S. scres through the groove in the strip by using PVC fasteners. The distance

between two screws shall not be more than 200 mm. A groove of 2mm may be left

at the joint of two panel for aesthetic looks. The exact size of the panel and correspondingly

of the grid may vary depending on the size of the wall.

WALL PANELLING WITH TEXTURED VINEER AND FABRIC PANEL SHEET

Providing and fixing wall panelling made with50mm x 25mm thick Aluminium pipe with

12mm thick Red and white grade plywood with 4mm thick premium quality texture sheet

with matt finish PU polish, Panelling with 8mm thick minereal fiber board panel which is

covered with 25mm thick 40 density cushion covered with premium grade fabric, Panelling

with 05mm thick premiu grade texture phase vineer sheet with given appropriate groove

and finish with PU matt finish malamine polish,Cushion panels are install with premium

grade glue with required necessery hardware complete as per given details by architect and

engineer in charge.

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR PROPOSED OFFICE BUILDING RENOVATION WORK AT NADIAD MUNICIPAL CORPORATION AT NADIAD_2ND CALL

PROPOSED OFFICE BUILDING RENOVATION WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides

with required EPDM rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed echanically

wherever required including cleat angle, Aluminium snap beading for glazing / panelling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) : Powder

coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

10.00 and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in 19.25 Smt 1216.49

basic item): With Frosted glass sheet of nominal thickness 4 mm (weighing not less than

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or

graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in

aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel

screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-

laminated particle board with decorative lamination on both sides

Providing and Arranging PREMIUM EXECUTIVE REVOLVING CHAIR (Meduim Back) Sigma

chrome Base with Knee Tilt Synchro Mechanism with Any Position back Lock, Seat & Back -

Made from High Density U - FOAM, Armrest in two pieces 12mm outer boire cut veneer

polyurathine High gloass & 6mm hot pressed plywood upholstered pad which fix with seat

.Including all materials and labour etc.Complete as per drawing and instruction of engineer-

in charge.Size : max.Height : 1105 mm to Min. 1015mm, Seat : 660mm x 660mm ,back

mm x 600 mm Molto 562 Meduim Back Chairs

Providing and supply The chair pipe structure of MS CRCA finish 16 gauge round pipe having

a diameter of 32 mm, the understructure frame tubular structure with stability for proper

balance, the seat and back is supported on spring structure, the backrest armrest and seat

13.00 dimensioned and curved from an ergonomics point of view, the frame and spring-seat 15.00 Nos 4533.57

structure prepared from MIG welding process & powder coated, proper high-density rubber

bush provided at all four legs, seat & back upholstered with fabric. give in image form

Sofa- 3- seater, 2 seater and single seater sofa with 19mm water & termite proof ISI grade

plywood under strcture with necessary kiln dried & treated C.P.Teak wood supports & legs

wherever required. It shall be covered with 45 density HR foam with required thickness as

per design in seat, back and handle respectively. This should be again covered with

14.00 Kg/M2 and 14 mm thick HR foam with madarpat cover on it & upholstered with fabric of 4.20 Rmt 25250.00

suggested shade & finish in seat and back on all open visible sides. Wooden legs are

melamine polished with two coats as per sized specified in detail drawings.Material

selection should be as per engineer in charge and chief architect..

Providing & Fixing Door closers arrow type with spring

length as approved sample (30 cms)

16.00 S.S. Handle for Door 15 Cm size of ASIS 304 Grade 2.00 Nos 76.17

Chromium plated Brass mortice latch and lock 100x65 mm with

levers and a pair of brass lever handles

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR PROPOSED OFFICE BUILDING RENOVATION WORK AT NADIAD MUNICIPAL CORPORATION AT NADIAD_2ND CALL

PROPOSED OFFICE BUILDING RENOVATION WORK

Providing And Arranging table for chamber having overall thickness of Top 40 mm

(18+18+4mm)18 mm thick MR Grade plywood and 4.00 mm thick veneer at top with

melamine polish finish including 8mm thick back painted glass. Top to be made from 75mm

x 50 mm Indian teak wood with half round moulded on long side with melamine polish. Leg

50 mm x 50 mm x 1.6 mm thick CRCA Square pipe and supporting pipe 50 mm x 25mm x

mm finishing with epoxy powder coated 50 micron with leveller. Appron having 18 mm thick

MR Grade plywood with 4.00 mm thick veneer having melamine polish finish. Drawer Unit-

18.00 450 x 550 x 600 mm having all Structure 18 mm thick MR grade plywood with veneer and 2.00 Nos 51685.79

teakwood border of specified size with melamine polish finish. Drawers (3 Nos) slides on

Ebco make telescopic channel with Godrej make lock with two keys and necessary fixtures

and fastening as approved with balancing laminate inside 0.8 mm thick of approved shade

including all materials and labour etc. Complete as per drawing and instruction of engineer-

in charge. Side Unit to be provided saparetly.Judge Table with MDU veneer Size :- 1800mm x

Providing and fixing in position 300mm high , 150mm wide englsih letter made from 1.0mm

19.00 thick stainless steel sheet as directed by enginer in charge with all necessary tolls & plants 2.00 Nos 757.50

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (a) single door (iii)8 way

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation

on single phase 240 V. having characteristic of quick action & tripping with all

21.00 advance feature & do not incorporate any electronic component. for following 2.00 Ea. 2919.91

Max. rating erected as directed. (iii) 63 Amps. DP

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV - Cat-lll

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on surface on wall/ ceiling

complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/ metallic front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose /

H.D. Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR PROPOSED OFFICE BUILDING RENOVATION WORK AT NADIAD MUNICIPAL CORPORATION AT NADIAD_2ND CALL

PROPOSED OFFICE BUILDING RENOVATION WORK

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(d) 3 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(d) 3 wire 4 sq. mm

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on wall/ ceiling

complete with 6A Modular type switch and hum free EME four or more step

type electronic fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single mounting base

frame covered with textured/ metallic front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and accessories Cat. III

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

27.00 with remote unit for Speed Control and all remaining accessories including safety pin, nut 4.00 Each 3356.23

bolts, washers, temperature rise = 75 °C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

(C) 1400 mm Sweep (56")

Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC / Metal board with

mm thick PC (Polycarbonate)

/ Acrylic sheet erected as directed 1 no. 6A/ 16A universal plug-switch combined.

4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular Type Accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base frame covered with textured /

29.00 metallic front plate modules erected on / in wall / ceiling with following type 4.00 Pt. 309.06

accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (a)

with medium class Rigid PVC pipe and accessories Cat. III

Providing and erecting approved make split air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and blower motor

with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco

Friendly green gas charging, 15A plug top & Remote Control) with necessary core

cutting. For 3 Star Rating of current year (b) for 1.5 ton capacity

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR PROPOSED OFFICE BUILDING RENOVATION WORK AT NADIAD MUNICIPAL CORPORATION AT NADIAD_2ND CALL

PROPOSED OFFICE BUILDING RENOVATION WORK

Providing and erecting approved make split air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and blower motor

with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco

Friendly green gas charging, 15A plug top & Remote Control) with necessary core

cutting. For 3 Star Rating of current year (c) for 2 ton capacity

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete & Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

-16 Amp. SP one way switch - Cat.III

-6/16Amp. Universal socket - Cat.III

Consulting Civil Engineer

Dharmesh Deshani (OPC) PVT.LTD.

City Engineer Chief Accountant

Nadiad Municipal Corporation Nadiad Municipal Corporation

Dy. Municipal commissioner Dy. Municipal commissioner

Nadiad Municipal Corporation Nadiad Municipal Corporation