CHAVARA BP CONSTRUCTION OF CHAVARA BLOCK PANCHAYTH BUILDING IInd PHASE Electrification General Electrical Work

Amount

Part 1-Electrification-List of materials attached

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

OD214922/2024-2025:Supply and providing Recess mounted square/round LED ceiling fitting (LHEBHDP61W018 18 watts or nearest Hawells or equivalant philips/crompton make including cutting of ceiling in correct shape and giving existing connection

OD215130/2024-2025:Supply and providing Surface mounted LED ceiling fitting 12 watts or nearest crompton/ philips/Hawells or equivalant make on surface of wall/ceiling and giving connection

OD215131/2024-2025:Supply and providing Surface mounted square type 1x1 feet LED ceiling fitting 18 watts or nearest crompton/ philips/Hawells or equivalant make including on surface of wall /ceiling and giving connection

90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD215088/2024-2025:Supply and fixing contactor suitable for light fittings in position( L&T or equivqlant make)

OD215090/2024-2025:Supply and fixing suitable Timer in position

OD215091/2024-2025:Supply and installation of dust and Vermin proof wall mounting SINTEX make enclosure plate suitable to fix SPMCB up to 6 nos on wall using suitable clamps nut bolt etc.

90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD215086/2024-2025:Supply, conveyance, installation, testing and commissioning of 225 mm light duty exhaust fan in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of suitable size PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS.

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top

OD214948/2024-2025:Supply and fixing of 9U, 500 MM Depth Wall Mount Rack with Front Glass door, cooling fan 90cm ,NVRS, 1 No Power Distribution Unit Horiz /6soc/6A/Indian round pin - 1 no, Horz.Cable Organizer /1U/Loop - 1No.(Netrack or equilent make)

OD214924/2024-2025:Supply and fixing of 6U, 500 MM Depth Wall Mount Rack with Front Glass door, cooling fan 90cm ,NVRS, 1 No Power Distribution Unit Horiz /6soc/6A/Indian round pin - 1 no, Horz.Cable Organizer /1U/Loop - 1No.(Netrack or equilent make)

OD214926/2024-2025:Supply and providing 3 meter Cat 6 Patch Cord. Prefered make:Legrand/Amp

OD214927/2024-2025:Supply and providing one meter Cat 6 Patch Cord. Prefered make:Legrand/Amp

OD215323/2024-2025:Supply and installation of 16 Port 10/100 /1000 Mbps rack mountable switch Make: GIJA or equivalant make CISCO/NETRACK

OD215325/2024-2025:Supply and installation of 24 Port 10/100/1000 Mbps rack mountable Giga Ethernet switch- Cisco make

OD214949/2024-2025:Supply and fixing CAT -6 24 port enhanced modular type patch panel for inter connecting servers and clients including termination charges

OD214930/2024-2025:Testing / Configuring each and every node point(both ends) and making permanent labeling at the I/O and on the switch

OD214931/2024-2025:Supplying and fixing RJ 45 socket 1nlet/outlet on the existing modular plate & switch box including connections as required.

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.28.1:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

OD215106/2024-2025:Supply of 4 KVA voltage stabilizer suitable for 1.50 TR split type A/C unit . V guard or equivalant

OD215107/2024-2025:Supply and installation of Fabricated Stand suitable for fixing split AC outdoor unit

OD215108/2024-2025:supply & providing suitable length of soft drawn copper pipe with nitrile rubber insulation for connecting out door & indoor units as refrigerant pipe, includung insulation,suitable rubber seal form sleeve 10mm thick brazing etc.

OD215109/2024-2025:Supply, installation, testing and commissioning of 1.50 TR 3 Star rated Inverter Hiwall Split AC, having black fin coating coating for corrossion resistance and long life span. With 100% Copper codenser coil non CFC refrigerant or 410 A /R32with copper condensing and evaporating units capable for cooling dehumidifying air circulating, filter, micro processor control with cordless remote,cables and copper pipe , drain pipe( up to 3 mts) etc. including installation and testing charges( Blue Star /Daikin/Mitsubhishi)

OD241314/2024-2025:Supply, installation, testing and commissioning of 1.00 TR 3 Star rated Inverter Hiwall Split AC, having black fin coating coating for corrossion resistanceand long life span. With 100% Copper codenser coil non CFC refrigerant or 410 A /R32with copper condensing and evaporating units capable for cooling dehumidifying air circulating, filter, micro processor control with cordless remote,cables and copper pipe , drain pipe( up to 3 mts) etc. including installation and testing charges( Blue Star /Daikin/Mitsubhishi)

RAJEESH KUMAR R (BID ID -1988815)

Xavier Joseph (BID ID -1997975)

Bidder Name

sunilal

Xavier Joseph

RAJEESH KUMAR R