BID DOCUMENTS FOR DEVELOPMENT OF WALL BEAUTIFICATION AND DECORATIVE WORK AT VARIOUS AREA OF JAMBUSAR NAGARPALIKA UNDER: SWACHH BHARAT MISSION GRANT.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Jambusar Nagarpalika

SECTION-7 BILL OF QUANTITIES-165

JAMBUSAR MUNICIPALITY, JAMBUSAR

NAME OF WORK :- ESTIMATE FOR WALL BEAUTIFICATION AND DECORATIVE WORK AT VARIOUS

LOCATIONS UNDER JAMBUSAR NAGARPALIKA

Qauntity Item Discription Total Rate Unit Amount

1 176.50 Providing 15mm thick cement plaster in single coat on

Smt. Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra

over items 58 to 64 for finishing with a floating coat of neat

cement slurry. 235.92 Smt.

2 176.50 Artistic 2D/Multicolor/Grafiti art work with aesthetic sense

Smt. done by experience artists team with water resistance

durable exterior high quality paint including primecoat up to

3 metre wall height Include with preparing base paint for

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-166

JAMBUSAR MUNICIPALITY, JAMBUSAR

NAME OF WORK:- ESTIMATE FOR BEAUTIFICATION AND DECORATIVE WORK OF PAVER BLOCK PATHWAYS

AT VARIOUS LOCATIONS UNDER JAMBUSAR NAGARPALIKA.

DEVELOPMENT OF PATHWAY

Item Qty. Description Total Unit Amount

1 453.60 Dismentaling tiled of stone floors laid in mortar including

Smt stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.

2 68.04 Box Cutting the Road Surface to proper slope and camber for

Cmt. making a base for road work including removing the excavated

stuff and dipositing to road slope as directed all lead and lift etc.

complete upto 50 mt. Lead

3 68.04 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

Cmt. coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

4 453.60 Providing and fixing pre-cast Rubber Dye inter locking concrete

Smt. block 60mm thick with grade of concrete M300 pnumatic

compressed / Vibrated mechanically as per approved design

confirming to IS 15658 : 2006 including 35mm sand layer for

levelling and filling the joint with sand in proper line and level etc

complete as per guidelines of IRC : SP 63 - 2018 etc. complete.

5 198.00 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 20cm length,45cm height and

15cm thick of M250 grade concret as per approved design and

including excavation for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc complete.

6 162.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

Mtr multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

size of cables (c) 4 core 10 Sq. mm

SBD SECTION-7 BILL OF QUANTITIES-167

7 63.00 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

Mtr copper cable 1.1 KV grade to be erected as directed of following

8 162.00 Providing & laying approved make Double walled corrugated

Mtr. pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for

enclosing cable and back filling the same to make ground as

per original.(A)50 mm dia

9 14.00 Supplying and erecting approved make Decorative Conical Pole

No. (Medium Duty ) Made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, with required base plate and integral

Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable terminations as

erected on suitable foundation (included) with necessary GI nut-

bolts/J-Bolts. as per details given by manufacturer considering

site requirement. The length of poles are as below.

(A) 3 Mtr. Long 70 mm Top X 115 mm bottom dia,3 mm 4896.48 Ea.

10 14.00 Supplying and erecting LED street light / Flood light fittings with

Each High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP 65 (ii) 32 to 40W

11 38.00 Providing and erecting Annealed bare Copper wire 8 to

SBD SECTION-7 BILL OF QUANTITIES-168

12 14.00 Pipe type earthing having 150 cms.long and 2.5 cms. dia.

Ea. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

13 14.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and salt with alternate layers

of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I. Cover complete

as per para 7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with end socket

as per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification

(C) with 60 x 60x 0.315 cms. Copper earth Plate 7874.97 Ea.

14 14.00 For using salt and charcoal / coke as required for pipe type

15 51.44 Excavating hard Murrum or Metal road by chiselling for

Cmt preparing pit for poles or earth plates or for laying pipes &

clearing the site by removing debris & making site good. 240.38 Cmt

16 14.00 Providing & erecting 240 V MCB Double pole switch for lighting

Ea. Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity. (A) 6 to

17 2972.00 Steel work, welded in built up sections framed work including

Kg. cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like 90.48 Kg.

18 53.00 Painting two coats (including priming coat) on new steel and

Smt other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

SBD SECTION-7 BILL OF QUANTITIES-169

19 168.00 Providing 1:2:4 cement concrete foundation & 70 % PCC from

Nos. bottom including excavation for the pole of size 45 x 45 x

cm. Deep in below ground level with plinth of 45 cm x 45 cm (or

45 cm dia x 45 cm) high upper ground level with necessary

curing and finishing in approved manner.

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-170

JAMBUSAR MUNICIPALITY, JAMBUSAR

NAME OF WORK :- ESTIMATE FOR GRILL ON EXISTING CULVERT FOR BEAUTIFICATION AND DECORATIVE

WORK NEAR SARSWATI SCHOOL AT JAMBUSAR NAGARPALIKA

Qauntity Item Discription Total Rate Unit Amount

1 62.50 Removing and scraping of old deteriorated plaster of any

Smt. thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift.

2 3.50 Demolition of Brick work and stone masonry including stacking

Cmt. of serviceable materilas and disposal of unserviceable materials

with all lead and lift.(ii) In Cement Mortar.

3 3.50 Providing and laying controlled cement concrete M.200 and

Cmt. curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

4 27.00 Providing formwork of ordinary timber planking so as to give a

Smt. rough finish including centering shuttering strutting and propping

etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

5 1.00 Brick work using common burnt clay building bricks having

Cmt. crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

6 62.50 Providing 15mm thick cement plaster in single coat on Rough

Smt. (Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) Extra over items 58 to 64 for

finishing with a floating coat

SBDof SECTION-7

neat cement slurry.

BILL OF QUANTITIES-171

7 57.60 Providing, fixing and fabricating of G.I. Chain Link Jali 10 Gauge

Smt Fencing with necessary fittings and having angle support of

50x50x6 mm thick and c/c. distance 1.23 between two column

with loading, unloading, lead and lift. Including all labour and

8 58.00 Painting two coats (excluding priming coat) on new steel and

Smt. other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

9 62.50 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-172