Resurfacing of road (Resurfacing of B.C. and D Block roads in Sector-122), Noida

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No :- 23/GM/DGM/SM-WC-6/2025-26 Select

NAME OF WORK :-Resurfacing of road (Resurfacing of B.C. and D Block roads in Sector-122), Noida Provided

Name of Tenderer Not Provided

TOTAL NIT COST OF PROJECT (In Rs.)

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer (In Indian Rs.) Status FINAL STATUS QUALIFIED

1 SOLVENCY (Issued within a period of minimum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

For Similar of works:- dsoy Hkou fuekZ.k@ lh0lh0 jksM@ QqVikFk@ Mzsu@ ckWDl dyoVZ@ lSUVzy otZ@ isfUVax@ lM+dksa dh lkekU; ejEer@ Hkou@ pkjnhokjh@ bUVjykWfdax VkbZy@ ukyh o lhesaV ls lEcfU/kr dk;Z ds vuqHko ekU; gksaxs A lhoj o tykiwfrZ ds vuqHko ekU; ugha gksaxsA

RESULT OF EXPERIENCE NOT QUALIFIED

3 TURNOVER (During the immediate LAST 3 consecutive financial years) 30% OF TOTAL ESTIMATED COST

YEAR1 0 NOT QUALIFIED NOT QUALIFIED

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years. Affidavit should be submitted by the contractor/ firm with C.A. certificate.

4 Required Technical Staff Select

5 Required Machinary Select

6 Character Certificate of Indivisual /partners /directors issued by District Megistrate Select

7 Affidavit of not blacklisted Select

8 Address Proof/Id. Proof of indivisual /partners/directors. Select

9 Registration certificate of G.S.T.Department Select

10 Filled in form Capability Statement. Select

11 Certified Copies of relevant pages of following documents: Select

a) Memorandum and Article of Association showing objectives of the Company / firm and authority to sign the e-Bid/contract or delegate the power to others for signing the e-Bid/contract. Select

b) Place of registration. Select

c) The power-of-attorney authorizing the tenderer to sign the e-Bid/ contract. Select

d) PAN certificate of the company/firm. Select

e) G.S.T. registration certificate of the company/firm. Select

12 Affidavit for no blood relation in Noida Authority employee . Select

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: -GENERAL MANAGER, SECTOR-6, NOIDA

Name of Work:-Resurfacing of road (Resurfacing of B.C. and D Block roads in Sector-122), Noida

Contract No: 23/GM/DGM/SM-WC-6/2025-26

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On bituminous surface @ 0.50 Kg / sqm Sqm _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Excess(+) Full Conversion INR

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Cum Excess(+) Full Conversion INR

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Cum Excess(+) Full Conversion INR

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250Gms per Sqm Area Thickness of 2.5 mm is Exclusive of Surface applied Glass Beads as per IRC:35 the Finished Surface to be level uniform and Free from Streaks and Holes Rate are inclusive of All taxes Royalty etc, all T & p Machine material and Labour Required for Proper Completion of Work. Sqm _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Excess(+) Full Conversion INR

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all completeOverhead informatory road signage as per drawings, specification and direction of the engineer-incharge.(tructural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Sqm Excess(+) Full Conversion INR

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. Each Excess(+) Full Conversion INR

S/o J.C.B Complete at Site on hire Basis including Cost of Diesel and Driver etc. Complete in all respect as per Direction of E/I Days Excess(+) Full Conversion INR

Tractor with Trolley including P.O.l & Driver Days Excess(+) Full Conversion INR

S/O Beldar Nos. Excess(+) Full Conversion INR

Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic starene Acryloretrite) of HP (High Impact polysterene) or ABS havcing electronically welede micro-prismatic lens with abraision resistant coating as approved by Engineeer in charge. the glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35(+/5) degress to base . The reflective panels on both sides with at least 12cm of refdlective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as commended in BS: 873part 4:1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Nos. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information