SPL REPAIRS TO BLDG NO T-29 OF AGE (E/M) OFFICE, PROVN OF DEFI GEYSERS AND EXHAUST FAN IN JCOS/OR MD ACCN AT BELONIA MARG, 155 BH AND 4 CSR, PROVN OF WAITING SHED OF 56 FMSD AND PROVN OF 06 X SPLIT AC 1.5 TON CAPACITY IN HOSP LAB UNDER GE (S) TEZPUR

Amount

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.All as specified and as directed.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work.All as specified and as directed.

Dismanting timber boarding of any description fixed in any position.All as specified and as directed.

Dismantling Structural steel work includings door, gates, etc and similar works.All as specified and as directed.

M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamfered.All as specified and as directed.

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing), All as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.All as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.All as specified and as directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws as specified.

All as per item No.10 above but plain sheet for ridge ,gutter etc fixed with self tapping screws as specified.

M&L 2nd class HW in scantling fixed clean swan in framed work.All as specified and as directed.

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing.

Supply and fix, steel windows with side hung shutless including Box type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded all as soecified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.All as specified and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door, windows and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,locking block screws etc.complete all as specified

S&F 35mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side.All as specified and as directed.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each.All as specified and as directed.

S&F 150mm long aluminium handle, cast type, anodised .All as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.All as specified and as directed.

S&F 100mm Butt hinges medium weight cold rolled mild steel All as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 300 mm long with haps and staple bolt type and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

Dismantling wall/ceiling board (fibre pulp insulation ) or insulation boards any thickness including cover fillets

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress All as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.All as specified and as directed.

S&F 5 mm thick tinted/heat absorbing glass of any size with aluminium bedding and complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and Smooth without using extra cement All as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement .All as specified and as directed.

Supply & fix in repair 20mm dia aluminium alloy powder coated curtain rod fancy type with two Nos of socket complete for doors/window opening all as specified and directed.

M&L for Applying two coats of Oil bound distember to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L for Applying two coats of Oil bound distember to wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L preparation of newely plaseter sufaces and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L for complete removal of existing treatment of external walls along with preparation of wall surface using wall care putty and applying two coat of apex/ weather coat water proofing paints over two coats of approved paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

Supply only 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle flush pipe of 32 mm dia including brackets complete all as specified and directed.

Supply and fix, as in repair,15 mm dia 450 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed. Model No: CON-041KN ,Make: Jaquar

S&F 15mm bore health faucet (ABS body) with 8mm Dia, 1.2 m long flexible tube & wall Hook.

Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.All as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.All as specified and as directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. .

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 56 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 58 here in before but 20 mm bore.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.All as specified and as directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.All as specified and as directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.All as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 110mm bore.

S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) pipes 110mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F in repair PVC (SWR) bends any radius 110 mm bore.

S& in repair FPVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

Surface excvation n.exe 30 CM deep and avg 15 CM deep and getting out in soft/loose soil.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in hard/dense soil.for fdn etc

Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil.

Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point.

M&L for Hardcore of broken bricks of guage n exe. 63mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering including watering and consolidation complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil.

M&L cement concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in as in sub base complete all as specifed and as directed.

M&L for 40 mm thick PCC 1:2:4 type B1 using (20 mm graded aggregate) as in floors, pavings & coping including finishing surfaces of concrete topping even and smooth (without using extra cement) complete all as specifed and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing All as specified and as directed.

M&L Reinforced cement concrete M 25 Design Mix (20 mm aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like All as specified and as directed.

Use & waste form work flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) All as specified and as directed.

M&L mild steel bars 6 to 8 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire All as specified and as directed.

M&L for fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

S&F steel work in tubular truss or post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.

M & L for taking down fans sealing cable ends dismantling blades and removing fan and keeping in safe custody for reuse.

Taking down old U/S LED light fittings any type and size All as specified and as directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn with rigid PVC concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.93 above but for 5 amps socket on same board with other switches

All as per Ser item No.93 above but for 5 amps socket on independent board.

All as per Ser item No.93 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fix switch 5 amps switch flush type one way single pole.

Supply and fix switch socket combination outlet flush type multi pin 5 amps.

S&F in repair of modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair of modular bell push, flush type, 5 Amp,1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps

Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminal.

Supply and fix ceiling fan regulator Electronic rotary Step type 80 watt single phase A/C 230 volts all complete as specified and directed

Supply and fix Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC concealed conduit with all fittings and accessories including PVC box (IS-14772) and 1 X 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.

All as per Item No-104 but 2x6.0 sqmm+1x4.0sqmm earth wire

S&F PVC angular holder polycarbonate as specified and directed.

Supply and fixing wall mounting industirial socket incl top plug with suitable straight plug, 380 to 415 volts, TPN, 4 poles (3P+N+E) , 32 Amps, Tempra Pro IP 67 to used as 3 phase industrial load mounting on suitable size of wooden box fixing on suface of wall complete all as specified and directed. Make :- Legrand /Havells

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

Taking down old Unsv MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed

S & F MCB SP 6 to 32 Amp,C series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.

S & F MCB DP 6 to 32 Amps, C series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S

S & F MCB DP 40-63 Amps, C series, 230 Volts complete all as specified and directed. Make - Standard/Havells/C&S

S & F MCB TPN 40-63 10 KA "C" series 415 Volt complete all as specified and directed. Make : L&T/Standard/Havells

S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : L&T/Standard/Havells

Supply and fixing in repair water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 3 Ltrs storage capacity complete with fixing accessories. Make - Havlles

M&L for painting to ceiling / exhaust fan in two coats over one coat of red oxide primer using syenthetic enamel paint after washing with casting soda water ,scarping to old paint, cleaning etc and identy marking by different colour as per exisiting complete all as specified and directed. Note :- Colour of paint shall be approved by Engr-in- charge.

S& F ceiling fan of sweep not less than 1200mm with hanger in replacement of existed old vintage unseviceable ceiling fan as specified and directed. Make- Crompton/Havells/Bajaj

S&F in repair exhaust fan size of sweep not less than 230 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fix in repair , wall mounting fan size of sweep not less than 450 mm heavy duty energy saving single phase, 230 volts, 50 HZs complete all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Taking up earthing set complete all as specified and directed.

Material and labour for earthing complete with copper earth plate electrode 600cm x 600 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to copper strip 25x4 mm as earthing lead by means of bolts, nuts and washers, check nuts made out of copper all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified and directed.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH

Supply and fixing recessed dust free LED fitting 24 watts soft light glare free homogenous illumination very high efficiency enviormental friendly long life of suitable for T- grid celing and modular celing application complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fixing in replacement of table desk LED 20 watt decorative surface mounting dome shaped pendent in black finishes cool day light complete with all connected accessoreis Make - Havells cat No. LHFHDPE1TN1K020

M & L for point wiring for one fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through and including PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

Supply & fix Heavy Duty Exhaust Fans of sweep 300 mm with louvre of Make:: Havells/ Bajaj/Crompton/Usha/Almonard/Khaitan

Material and labour for cutting wall and making hole suitable for fixing Exhaust fan 150/300 mm sweep and making good disturbed surface all as per existing all as directed at site

Material and Labour for submain wiring with two single core PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC Casing caping and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps concealed in wall all a directed.

Supply and fixing water heater (Geyser) Vertical storage type, single phase, energy saving 5 star rated 230 volts grade insent type 25 Ltrs storage capacity complete with fixing accessories. Make : Usha/Havells/Bajaj/Orient/Crompton

Supply and fix Stainless Steel Geyser connecting pipe complete all as directed.

Supply and fix Stop valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

Supply and fix Bib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps concealed in wall all a directed.

S&F Hi wall split units indoor/outdoor complete with cardless remote control unit and with in built air ioneser with inverter compressor and plasma filter for better indoor air quality with 5 star rating and EER 3.2 of capacity 1.5 Ton,complete all as directed.

S&F Wall mounted Voltage stablizer 5 KVA suitable for 1.5 Ton Split AC,130V-270V.complete all as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

Chinmay Traders

M/S Deep-Jeet

M/s. M. G. Babloo Das

M/S Manjit Singh

M/S BHAGWATI CONSTRUCTION CO.