CERTAIN REPAIRS TO VARIOUS BUILDINGS OF JCOs/OR MD AND OTM ACCN OF FVT INCLUDING INTERNAL ELECTRIFICATION AT HARNI AREA

Amount

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F decorative grill with intricate design, aluminium anodised of any type and any shape, weight not less than 2.0 kg/sqm including necessary joining cleats hinges (if required) etc. complete, all as specified and directed.

S & F anodised aluminium window shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips, rubber neoprene packing, handles 01 No in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc. as per manufacturers instruction & trade practee.

S & F anodised aluminium door shutters using aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each shutter, 03 hinges per shutter, anodised aluminium snap beading, screws etc. as per manufacturers instruction & trade practee.

M & L for 5.5mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S & F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified.

M & L for 5.5mm thick sheet glass, figured quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S & F double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by Engineer in charge.

S&F 2nd class Hard wood 30mm thick glazed & skelton window/ventilator shutters open rebated & prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and miterd beds securing glass, sizes of members of shutters as specified in SSR part -I, section 8, clause 8.20(a) and fitted to chowkats.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.56 mm and fixed with tinned tacks, or galvanised staples complete all as specified and as directed.

S & F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

S&F MS butt hinges medium weight cold rolled 100 mm in long.

S&F in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

S&F in repairs 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F Factory made solid panel PVC door shutte 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished evan and smooth without using extra cement complete all as specified and as directed.

M & L for 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces and surface finished evan and fair all as directed.

M & L for rendering 10mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)complete all as specified and as directed.

M&L Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately).

Supply only Internal water proofing compound

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying three coats of white wash all as specified.

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of white wash.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level)

M & L for 75 mm thick PCC 1:3:6 mix type C2 (using 40 mm graded stone aggregate) as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete all as specified and as directed.

M & L for Forming 65mm deep x 10mm thick contraction (dummy joints), filled with sealing compound grade "A".

M&L for 50mm avg thick PCC padding in cement concrete (1:2:4) type B0 (Using 12.5mm graded stone aggregate) finished even and smooth without using extra cement for laying of WPT. complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 mix ,type D-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in sub base of path/hard standing

M&L for 100 mm thick PCC 1:2:4 mix ,type B-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in path/hard standing/ flooring complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&Lfor non skid colour ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes with CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles complete all as specified and as directed.

M & L for mirror polished machine cut kota stone slab flooring 20-25mm thick over cement screed base 20 mm thick in cement morter1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set over and including high performence adhisive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M & L for coloured (light shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:6 all as specified and directed.

M & L for coloured (light shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10mm thick in CM 1:4 1:6 all as specified and directed.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey colour and pigment complete all as specified and as directed.

M & L chequered cement concrete tile 20cm x 20cm x 30mm thick with grey colour and pigment set and jointed in neat cement slurry including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified.

Dismantling ceiling and wall boards or insulation board any thickness including cover fillets.

M & L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh to hanging and size of grid 605x605 mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre (Fillets, metal frame work and G.I. wire mesh paid separately)

S & F non asbestos fibre cement plain building board 4mm thick in false ceiling with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger including three coats of white wash in ceiling boards or match the shed of existing surface to a true surface.

Demolation of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc. all as specified and directed.

Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

M & L for reinforced cement concrete1:2:4, type B1, using 20 mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc

M & L for mild steel TMT bars 10mm dia and over, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for mild steel TMT bars 6mm to 8mm dia, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe

S & F in repair CI floor trap with grating including jointing to waste pipe fixed to cement concrete type B1, 1:2:4 for 75mm bore.

S & F in repairs plastic seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs vitreous china wash down water closet pan pedestal pattern (Europian type)(excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S & f in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve float and handle including bracket

S&F PVC connection 600mm long of dia 15mm complete.

S & F brass CP hand Shower for EWC including PVC connection of 1.2m length . Make:- Cera or equivalent

S&F Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions.

S&F in repair S S waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1.0m or not exc. 2.0m complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings & remove off the premises complete.

M & L for 6mm thick asbestos cement corrugated and semi corrugated sheets in roofs fixed with 'L' or 'J' type with bituminous washer & GI Washer or crancked hook bolts.

M & L for 6mm thick asbestos cement two piece adjustable unserrated ridge fixed with 'L' or 'J' type with bituminous washer & GI Washer or crancked hook bolts & similar work.

M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required, including a coat of Epoxy bonding agent of Dr Fixit/FOSROC/PIDILITE to old concrete/Cement surface complete all as specified and directed by the Engr- in -Charge. (Reiforcement will be measured and paid saperately under respective item.

M & L for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws

S & F in repairs 100mm bore cast iron bends diminishing pieces or tapers (large bore measured)

S & F in repairs 75 mm bore cast iron bends diminishing pieces or tapers (large bore measured)

S & F in repairs 75mm bore cast iron bends diminishing pieces or tapers (large bore measured) with oval access doors

S & F in repairs 100 mm bore cast iron bends diminishing pieces or tapers (large bore measured) with oval access door

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed.

S & F for stainless steel letters hollow type with thickness of steel minimum 1.25mm, over all width 300 mm & height 150mm, width of letter 25 mm each side fixed on stone/marble/graite etc., by welding with stainless steel screwes complete all as directed by Engineer in charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, brick masonary etc complete.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface.

M & L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate as in boundry pillars and posts footing etc.

M & L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts in fencing including cutting top to shape as directed, drilling holes, noteching for wire , etc. and including flat iron filletes for securing wire mesh or fence etc. including all necessary bolting riviting etc complete.

Supply only Chain link Mild Steel galvanisd fencing with 3mm dia weight n exc 4 kg per sqm made up to mattresses with mesh of size 50 x 50 mm as approved by GE.

Fixing only steel chain link fencing including line wires, any mesh size and type to any standards, rails, steel bars, straining bolts, etc, including provision of binding wire complete.

S & F for 10mm dia plain round bars fixed in chain link fencing horizontial including ends of bars hooked conforming to Fe 290 Gde E-165.

S & F for mild steel screw bolts machine made with haxagonal head at one end and screwed other or screwed both ends each screwed end to be fitted with washers and one hexagonal nut, not exc. 5 cm long and dia of sunk 11 to 15 mm complete. Note :- fixing is including in respect item No. 62 here in before

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new/old steel surfaces of any description over 10 cm width or girth including preparation of surfaces.

M & L for preparing new/old plastered surfaces of wall and applying two coats cement base paint over a coat of primer on external wall complete all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M/L for Point wiring complete with 1.5 sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated unsheathed (FRLS) cable enclosed in PVC conduit with accessories ISI marked fixed on surface of walls/ceilings by means of PVC Sleeves / dash fastness and cadmium screws all as per IS fittings mounted on terminal box with 3 mm thick phenolic laminated sheet top cover concealed in wall. The thickness of sunken box shall be 1.2 mm. The cover shall be fixed to terminal box with brass screws incl 1.5 sqmm single core cmultistranded PVC insulated but unsheathed cable as earth continuity conductor to common earth dolly drawn in same conduit complete all as specified.

One light controlled by one switch 6 amp one way

One fan point controlled by one switch 6 amp one way

One bell point controlled by one switch 6 amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin switch & socket on same board with other switches.

One light point controlled by two way switches

All as described as per item No 102 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S/F in repair TPN DBs 4 way with provision for FP as incomer and SP as outgoing all as directed. IP 43-IK 09 with metal double door of Make Legrand or its equivalent in Schnieder/ABB/C&S

Supply and Fix Distribution board SPN Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc factory made, confirming to IS:13032 fabricated out of CRCA sheet. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all way as specified.

SPN 12 way

SPN 8 way

S & F TPN 63 Amps 35 KA rupturing capacity of Make Legrand or its equivalent in Schnieder/ABB/C&S

MCB SPN 5 to 40 Amps.

MCB SP 5 to 40 Amps

M&L switch piano flush type single pole, one way 6 Amp .

M&L switch piano flush type single pole, two way 6 Amp .

M&L socket outlet 2 in 1, 3 pin 5 Amps

M&L switch socket combination 5 pin 6 Amp.

M&L Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S/fix fan regulator electronic type 100Watt 20V-50Hz as directed by Engr-incharge,

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked.

S& F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting

M&L flush type bell push 6 amp duly marked for bell complete.

M&L Electronic ding dong bell AC 230V single pole .

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and PVC conduit with accessories shall be measured as one unit.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and PVC conduit with accessories shall be measured as one length.

Supply, Fixing, Testing and commissioning of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt. Similar to Batten cat Part No.REGALBATTEN8UPTO1X22wSSBSWH and LED tube light cat part No.CRYSTAL1213T8DSTL18WLED865SGLASS of Make- Havells or equivalent in Make: Philips/Wipro/CG

S & F wall security light LED type not less than 25W . The Luminaire connecting with not less than 1.00 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete complete all as directed and specified by Engr-In-Charge. Make- Havells, Model-ENDURACITYLITEPLATSL20W LED 757SASYBOPC or equivalent in Phillips/Wipro/CG.

Supply, fixing, testing and commissioning of 70 Watt LED street light in repairs withNew generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.. following specification as per ENDURAPEARLPLUSSL70WLED757SASYTOPCMake Havells or its equivalent in Phillips/ Wipro/Jaguar/Halonix.

M&L for replacement of 25 mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.0 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc.suitable for steel tubular / PCC pole complete all as specified and directed by Engineer-in-Charge.

M&L for opening covers of ceiling fan, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge, warnishing after winding, drying, replacing unserviceable fan bearings No 6201/6202 for 1200.1400mm sweep, greasing, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block, transoporting back after repair, assembling the blades and hanging the fan in its own position to existing fan clamp and down rod with necessary Nut, bolt and washer and testing for smooth functioning after complete repair all as ditrected at site. Note : Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

M & L complete over-hauling/servicing of ceiling fans inclucing replacement to rubber reel, split pin, capacitor and oiling/greasing, painting and testing complete all as specified and directed by Engr-in-Charge

M&L for opening covers of Exhaust fan 225/250/300mm, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge as per IS-13730, warnishing after winding, drying, replacing unserviceable fan bush/bearings, greasing, replace of armeture coil with complete shaft, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block, transoporting back after repair, assembling the blades and fixing the fan in its own position to existing fan clamp with necessary Nut, bolt and washer and testing for smooth functioning after complete repair all as ditrected at site. Note : 1. Quoted rate deems to inclusive of rate also inclusive fan bearing and transporatation charges.

S&F Sheet Metal Enclosure with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20 Amps

Dismantling damaged wooden boards of Electric meter by disconnecting all electric connection and S&F rectangular teak wood board of size 30cm x 25cm x 5cm deep with smooth hylem sheet top 5mm thick for mounting Electric Meter including making holes for incomming and outgoing wires and making necessary electrical connections all as directed and specified.

Supply and fix 1.00 Sqmm PVC insulated overall PVC sheathed 3 core flexible cable for maintenance of tubelights and fans.

S & F in replacement under repair Electronic ballast suitable for tube light fitting 1x36W/40W, 240V, 50/60Hz and power factor not less that 0.90, Make- Wipro/Philips/CG.

S&F in repair tube light 36W/40W tubular fluorescent lamp, Lumens 2425, 5 BEE star rating, Make-Wipro/Philips/CG.

S & F in replacement under repair Electronic ballast 18/20 watt of make Wipro/Philips/CG. Lighting.

S & F in replacement under repair tube light 18W/20W tubular fluorescent lamp, Make-Wipro/Philips/CG.

S & F in replacement under repair 7W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >600 lm. Make: Philips/Wipro/Crompton

Supply and fix 4' feet LED 1X18W LED tube rod on replacing existing 36/40watt fitting at site as per user requirement, , Voltage Range:140-270 V, Frequency :50-60 HZ. . The LED tube light conforms to applicable IS 10322/EN 60598, similar to Havells model No : CRYSTAL 1213T8DSTL18WLED865SGLASS, , Make of Luminaire: Philips /Havells/Wipro.

Supply, installaing, connecting and testing electronic single phase AC energy (kWh) meter of accuracy class 1.0, Rating 10-60Ams, 240 volt, 50Hz, tamper proof type, 2 wire, with LCD Display, conforming IP54, including pilfer proof meter box with sealing screw provision and electric connection with existing cable complete and duly sealed as per model No SPPB15100000020C00 of Make HPL or equivalent model in L&T all as directed by Engineer-in-charge. Note : Old unserviceable meter shall be deposited to AGE E/M store yard.

Shree Vaishno Enterprises

M/S Badri Electicals