Cherukunnu Perambra-Perambra palli school road maintenence ward 11

Amount

POT HOLES

2.14.1.B:Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 (I) By Manual Means (B) Granular Courses

4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead

75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.2.2pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD44381/2025-2026:Mix Seal Surfacing- Manuval Means - Type A - Bitumen S -65 using Shredded Plastic Providing, laying and rollingof close-graded premix surfacing materialof 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A)or 13.2 mm to 0.9mm (Type-B) aggregate coated with shredded plastic (3% by weight of bitumen) as per standard procedue using penetration grade bitumen to required line,grade and level to serve as wearing course on a previously prepared base ,including mixing in suitable plant ,laying and rolling with a three wheel 8-10kN static roller and finishing to required level and grade as per Technical Specification Clause 509 by Manuval Means-Type A (II) Bitumen (S-65)

OD98762/2025-2026:Supplying and fixing MS Name board with 1.2 meter length post from ground level, having board dimension 80x 45 cm, lettering done with black enamel paint on yellow back ground, including the cost of all materials, labour and conveyance charges etc complete.

kollannur (BID ID -2309783)

Bidder Name

kollannur

GINSON GT