Renovation of Conference Hall by way of Laying of Slab over Ground Floor and Construction of Ist Floor with allied works at MHED Complex Shalteng Srinagar

Renovation / Facelifting of existing conference hall.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)

Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area of 3 sqm and below.

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :G.S. Sheet

Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge:

Construction of Ist Floor at Mechanical & Hospital Engineering (Dismental)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used asper design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level (Note:- Cement in this item is @330kgs / cum).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Stairs (excluding landings) except spiral staircases.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood (35mm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood (35mm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.150MM

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws etc. complete 250x20x6 mm

Providing and fixing bright finished brass hard drawn hooks and eyes 200 mm

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand)

Carriages of materials by Mechanical transport from approved source to site of work incl. stacking, loading and unloading complete.

Bricks from an average lead of 17 KM

Aggregates from an Avg. lead of 17 KM

Sand from an Avg lead of 17 KM

Structural steel work in built up sections trusses and framed work, incl. cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded.

Labour charges for laying / fixing of Structural steel work in built up sections trusses and framed work, incl. cutting, hoisting, fixing in position and applying a priming coat of approed steel primer all complete welded. as per the direction of Engineer-in-charge.

Providing PVC blind pipe 150mm dia as per IS: 12818 incl. errecting and Filling concrete with compaction etc complete in all respects. as per directions of engineer-in-charge.

Providing coloured high rib corrugated G. S. sheet roofing inciuding vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excBuding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.63 mm thick with zinc coating not less than 275.

Labour charges for laying / fixing of coloured high rib corrugated G. S. sheet roofing inciuding vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excBuding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.63 mm thick with zinc coating not less than 275. as per the direction of Engineer-in-charge.

Providing coloured ridges or hips of width 60cm overall width plain G.S. sheets fixed with polvmer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick wiih zinc coating not less than 275 gram/m2

Labour charges for laying and fixing coloured ridges or hips of width 60cm overall width plain G.S. sheets fixed with polvmer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick wiih zinc coating not less than 275 gram/m2 as per the direction of Engineer-in-charge.

Providing coloured valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2.

Labour charges for laying and Fixing coloured valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2. as per the direction of Engineer-in-charge.

Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size).

Labour charges for fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size).

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.

Providing and Laying polythene sheets over the wooden panelling for its protection against the cement slury while laying concrete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Supply and fixing of following sizes of medium class PVC conduit along with acessories in surface/ recess including cutting the wall and making good the same in case of recesses conduit as required complete in all respects, as per the directions of Engineer-in-charge. 25 mm

Supply and fixing metal box of following size on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required complete as per the direction of Engineer-in-charge.

75x75x60mm deep

Fan box