COMPLETION OF INCOMPLETE WORK CERTAIN MISC REPAIR TO FENCING STEEL GATE BOUNDARY WALLS ETC AT INSTALLATION AND REPAIR TO FOOTPATH DRAINS ETC AT INSTALLATION IN SECTOR A B AND C UNDER GE UTILITY AMBALA CANTT

Amount

Taking down cement or cement lime plaster of any description on brick or stone wall etc including racking out joints , hacking for key scrubbing down with water all as directed by Engineer-in-Charge.

Demolition of brick work built in CM or cement lime mortar incl all quoins, arches , pillar,drain etc all as directed by Engineer-in-Charge.

Demolition concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and as directed by Engineer-in-Charge.

Material and labour brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

Material and labour brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Except bricks) complete all as specified and as directed.

Material and labour PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate.

Material and labour PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded crushed stone aggregate.

Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

Material and Labour 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. Note: WPC shall be measured and paid separately.

Material and Labour 5 mm thick rough cast plaster over and including 10mm thick base rendering in cement mortar (1:4) mixed withWPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately).

Material and Labour preparation of new wall surfaces and applying two coats of cement base paint over a one coat of cement primer all as specified.

Supply only integral water proofing compound all as specified..

Material and Labour PCC in sub base, foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded crushed stone aggregate.

Material and Labour Rubber moulded precast concrete interlocking paver block (50% grey and 50% coloured) any shape and size of size 80 mm thickness M-35 Grade with grey cement and pigment over and including 50 mm sand cushion all as specified and directed.

Material and Labour PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc.for fixing of new fencing post complete all as specified and as directed by Engr-In-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified.

Dismantling of chain link fencing/ barbed wire fencing of any description complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m in any type of soil, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil all as specified.

Material and Labour PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregate.

Supply and Fixing Hand MS rails, half round or other stock section or core wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 all as specified and directed.

Material and labour galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. (Each line to be measured separately).

Material and Labour mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with welding for securing chain link fencing etc conforming to Fe-290.Gde-E-165, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of primer of red oxide on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of surfaces all as specified and directed.

Material and Labour Preparing surface of wood & wood based materials, steel & iron work, new or old & treated with tar or coal tar black paint, area tarred exc 0.1 sq. m. but n exc 0.5 sq. m each, treating ends of posts, backs of chowkats, etc.

All as per Item Ser No 24.00 above but not exceeding steel surfaces 10cm wide or girth all as specified and directed.

Material and Labour mild steel work for securing of chain link fencing and similar small articles etc confirming to IS-15911 all as specified and directed.

Supply and Fixing MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/square nuts and 5 to 10 CM long all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire all as directed.

Supply only chain link MS galvanisd fencing, any size or type all as specified and directed.

Supply and Fixing concertina coil 610 mm dia (50 turn/ coil ) expandable 6-8 mtr (short barbs) length 11 +1 mm thicknes of tape 0.5 mm, dia of spring core wire 2.6 mm foxed on angle iron frames including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as directed.

Supply and fixing framed work such as in hung shutter,gates including pintle hinges, stops,hand-made sliding door bolts, grills, gratings, etc. with ends of shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290.Gde-E-165, complete including fixing in cement concrete 1:2:4 type B1 all as specified and directed by Engr-In -Charge. Note: PCC shall be mneasred and paid for in relevant item here in before.

Material and Labour reinforced concrete pipes of 300 mm bore, class NP3 laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge

Note :- Amount of credit of Rs. 66600.00 for retrieved materials is mentioned in Schedule of Credit mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Kang Builders

ANIL CONSTRUCTION CO.

Puneet Sharma