SBRC/TB/SOPD(G)/01/RAN/2022-23

Amount

Boundary Wall and Gate. Total 196 RM (Excluding Gate) Providing soling in foundation and under floor with stone/ best quality picked jhama brick picked from dismantled brickwork, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. a. brick on flat soling

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

FORMWORK.Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete

FORMWORK. Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Formwork. Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick)b) In cement mortar 1:4

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). Chrome plated

Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete.

Providing roller to the gate including welding etc.complete a) With 25mmx50mm (dia) roller

Furnishing Items Provide good quality Standard Queen Sized Bed of Wood finish of Make Customized/Godrej Zen Pro/ Nilkamal Empire Queen Sized Bed

Provide good quality single beds of local make of wooden finish 200cm x 150 cm x 37cm

Supply & Placement of Mattress for Double Bed of 125mm thick. Both side quilted rubberized coir with flexi puff material/memory foam material. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of Mattress for Single Bed of 125mm thick. Both side quilted rubberized coir with flexi puff material/memory foam material. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Supply of pillows

Supply Bedsheets with Pillow Covers for Standard Queen sized bed

Supply Bedsheets with Pillow Covers for Single beds

5 star rated Washing Machine Top Loading Capacity 7-8kg

Supply & Placement of Hangout Wardrobe with Mirror. The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. The wardrobe has a mirror of 4mm thick pasted on the left side door using high quality 3M sticker/ The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products/Or Local make with decorative patterns

Office Tables H 31" x W 52.2" x D 46.5" Material Engineered Wood

Conference Table 8 Seater with Chair

Dining Table 4 Seater+Chair

Chimney 60cm 1100 m3/hr Auto-Clean Kitchen Chimney With Curved Glass (Baffle Filter, LED Lamps, Black)

Supplying 5 star Rated Fridge of samsung/voltas/whirlpool/LG etc. as per satisfaction of the engineer

Supply & Placement of I.S.I approved Wudmate witharm wooden chair made of red Miranti wood as per drawing. Back : Height: 1000 mm x Width: 425 mm Seat : Height: 450 mm x 480 mm. All wooden part will be as per drawing. Seat will be covered by foam wrapped with fabric as per required colour.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of I.S.I approved Get Together 4 Seater Coffee Table. - 1200 x 800 x 740 (H) mm).The table is made of membrane finish as per requirement for the ease of cleaning.Understructure:- The understructure is SS . The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of I.S.I approved Spice Cafeteria chair PP Seat & Backrest on Chrome Plated understructure. Depth of seat:-407mm.Backrest widht:-330mm(max).Width of seat:-405mm(max).Seat to back rest height:-385mm.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

I.S.I approved Sofa-Alysia 3 seater(2 Seater : 760mm (H) X 850 (W) X 2015 (L)).Frame :- Inner solid Frame structure made of high quality wood. The wood is kiln chemical treated tropical Meranti wood.Legs :- The legs are made of rubberwood having melamine matt finish.Seating Cushions :- The seat cushion is made of 7 inches multi layered foam of density 32D 23D 32D and HD with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 3 inches of elastic webbing of 350 gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength.Backrest :- The backrest has a 3 inch foam of 23D with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 2 inches of elastic webbing of 250 gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength.Outer Finish :- The outer finish has a superior quality leatherette stictched with nylon bonded thread and stained solid wooden legs.Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,BIFMA and SGS certificate for few of its products.

Curtains Cotton make Long and heavy for bedrooms, Conference, dining, lobby/reception etc.

Supplying with istallation, testing and commissioning of Hi- wall 3 star rating, non ducted split type Air Conditioner of the following capacity with the cordless remote complete with indoor and outdoor unit, copper pipe and electrical connectionj upto 5 mtrs between the room unit and the outdoor unit as approved by the Deptt. and as directed by the deptt.

1.5 Ton 5 Star Wi-Fi Twin-Cool Inverter Split Air Conditioner (Copper, Shield Blu Anti-Corrosion Technology, nanoe-G Air Purification, 2021 Model, CS/CU-XU18XKYF, White)

Side Table VIKI Bedside Table(Wenge, Engineered Wood, Suede Finish, 2 Drawer) PUVIK( Engineered Wood)

Installation of Bajaj New Shakti Neo 15L Metal Body 4 Star Water Heater with Multiple Safety System, White

Supplying with installation testing & commissioning of LED LUMENO 10W E27 WW Lamps etc. complete including all acessories as per specified and directed by the department.

Supplying with installation testing & commissioning of LED Eclipse 6.5 W Hexa Lamps etc. complete including all acessories as per specified and directed by the department.

RENOVATION WORK OF THE OLD IB WHITE / CHALK WASHING. SURFACE PREPARATION.(a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

b) Extra over item no (a) above for scraping on ceiling and on sloping roof.

Washing and cleaning wall surface with soap, soda and clean water

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)(i) Thickness = 1.5 mm thick

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Repairing of old Windows making good as per satisfaction of the Engineer including fitting new lathches and repairing broken glasses etc.

Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specifiediii) Oak Brand

Repairing of Door including fitting new mortices, cleaning the door, scraping the old paint with sand paper and applying enamel paint etc. as per the satisfaction of the engineer.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )v) pin cylinder Mortise Lock Oliver/Matiz/Victoria -Godrej make

Providing and laying six course water proof treatment with bitumen felt over roof consisting of first, third and fifth courses of blown or residual bitumen applied hot @ 1.45kg, 1.20kg and 1.45kg per sq.m of areas respectively, second and fourth courses of roofing with felt type 3 grade - I (hessain base self finished bitumen felt) and sixth and final course with stone grit 6mm and down per sq.m including preparation of surface, excluding grading complete.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)(i) Thickness = 1.5 mm thick

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Gas Charging of Split type A.C. with F-22 fresh refrigerant 1.50 Ton Capacity

Supplying fitting and fixing of single wall brackets Philips model 37554 (or equivalent as approved by the Deptt.) on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories including connection as required complete. Without lamp.

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).t) Curtain rod ii) 25mm x 2mm

Supplying of Curtains as directed by deptt.

Repairing of Sofa Set as directed by deptt.

Repairing of Matress as directed by deptt.

Polishing of Bed as directed by deptt.

Supplying of BedSheet ,Bed Cover, Pillow and Pillow Cover as directed by deptt.

Removal of Door as directed by deptt. Old IB

Brickwork,Plastering in Door Frame as directed by deptt. Old IB

Removal of old Tiles as directed by deptt. Old IB

Installation of new wooden Floor as directed by deptt. old IB

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) Old IB

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)(i) Duke 660 x 495 (Cat. No.C8416/27) (white/coloured) Old IB

Supplying fitting and fixing wall mounted / floor mounted shower enclosure of Jaquar make of following trade name complete as directed.a) Kretana 1000x1000x1850 mm Old IB

Supplying including fitting of Faucet as directed by deptt. at Old IB

Providing fitting and fixing Decorative Mirror complete as directed and specified.(b) Size 600mm x 450mm

New Glass Window for Bathroom

Internal Pipe Line

External Pipe Line

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 35.00 Sq.mm 4 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Switches

Socket

Painting two coats on old G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over G.C.I sheets to give an even shade including the cleaning the rust patches with emery paper, dust ,dirt, grease and other foreign matter with water complete.

Exterior Painting: Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.c) Asian paint/Berger Paint/ICI paint/J & N paint/Nerolac

Exterior Painting: Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.c) Asian paint/Berger Paint/ICI paint/J & N paint/Nerolac

BALANCE WORK Construction of Drain in Brick masonry in cement mortar 1:4 with foundation concrete in PCC of M15 Grade(1:3:6) with 20mm nominal size of aggregate, inside plastering of 12mm thick cement mortar 1:3 and bed slope of 1:150, 250mm deep with initial depth of 100mm with necessary shuttering of sides and earthwork in excavation of foundation trenches and refilling the sides after completion of the work provided with Steel Grating Trench Cover

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.3)0.50 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.12.4.2 0.50 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :1.60 mm thick with zinc coating not less than 350 gm/m²

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.12.41.2 110mm dia pipe

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler: 4Nos. 110mm

12.42.5 Bend 87.5°: 110mm-4Nos.

12.42.6 Shoe: 4Nos. 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.12.43.2 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).With Sal Wood

Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

Providing and fixing plain frosted glass of ordinary glazing quality beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for woodenbead shall be made separately)(1). Area of glass panes not exceeding 0.15m2 3.5mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete including priming, 2 coats of paint.

Providing and fixing wooden 100mmx60 mm moulded hand rails in place of rounded hand rail. (b) With 1st class local wood (Hollock)

Providing and fixing 60mmx35mm first class timber balustrade 60mmx35mm square, wrought fixed with ends housed (square or splayed) to hand rails and trends or strips complete. with 1st class teak Sissu wood @72cm Rm each

Providing 1st class local wood (Hollock/Bonsum)ventilating louvre in 50mm x 38mm size wooden frame with 150mm x 20mm slate made of 1st class local wood including fitting and fixing with nails and painting with two coats of kiricide oiling complete. (i) 1st class local wood (Gamari/Bonsum/Holok)

Supplying and installing uPVC- Fixed Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent. With 5mm clear glass (a) Fixed window using uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash.(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass (ii) 4-Panel with 5mm clear float glass

Supplying and installing uPVC- sliding door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.8mm with corners fusion welded, fully reinforced with Galvanized steel 2mm including interlock profile, glazing bead, grooving bead, brush seal, locking arrangement, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.(II) 2 Track Sliding door without Flyscreen using uPVC section of size 58mm x 53mm x 2.8mm thick wall for frame, 37mm x 75mm x 2.8mm thick wall for glass sash, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)(b) 4-Panel ii) Using 5mm clear toughened glass

f) Extra for providing and fixing curtain rod of 1.25 mm thick wire brass plate with braket instead of wooden curtain rod of 25mm dia brackets (actual length of the rods to be measured) (i) 20 mm dia.

Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. (b)With Bonsum/ Sundi wood.

VITRIFIED TILES. B) ON WALLS.Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

VITRIFIED TILES.A) ON FLOOR. Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

ANTISKID TILES Parking area and Car Porch. Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Kitchen, Porch:

Supplying fitting and fixing bath tub including providing necessary fittings complete as directed and specified.(pipes will be measured and paid separately)(A) Parryware make

Supply & installation of Electric Ceiling Fans 75Watts 1200mm /1400mm wide as directed

Supplying and growing of flowering plants including flower tubs where necessary as directed by the dept.

Supplying, fitting and fixing in position Multimedia Pressure Filter consisting of FRP vessel of Gratisco/TATA make filled with Anthracite, Kotax Light Media, white sand, Treated sand, Gravel, MnO2 filter media alongwith cotton candle to remove iron effectively at a max pressure of 10kg/sqcm and max flowrate of 1000lph with backwash facility including all fittings, valves,TEE, elbow etc.complete in all respect as directed.

Granual Sub-base with Well Graded Material. For Grading II material

Loading & Unloading with care CC Blocks by manual means including carriage by trailer as directed by the department

Relaying existing good condition interlocking block pavement from stack in side of the road with edge restraints.

Supplying & Installation of Inverter of make Microtek/Luminous/V-Guard 3KVA alongwith 2nos of Tubular batteries of make Exide/Amaron/Sonic and wiring complete of adequate capacity to the satisfaction and direction of Engineer-in charge

Estimate for 25 KVA Transformer Supplying, installation, testing and commissioning of the following rating copper wound indoor/outdoor type transformer complete including the payment to be made to Power Supply Authority for supervision charge, labour charge, cost of LT/HT metering etc. (Excluding the cost of load security and making necessary arrangement for charging approval of the substation from the competent authority as directed by the specified deptt. Transformer should be as per CEA Guidelines as recommended upto date 200Kva, star rating upto 5Star, above 200kva as per CEA Guidelines for losses with LV Enclosure. 25kvA 50hz, 11/0.433KV oil filled transformer of circuit tap change

Supplying and erection of PSC Pole of 8.5m long. The pole is to be erected in 1:2:3 PCC foundation of size 1.5m depth x 0.45m x 0.45m having PCC base foundation 15cm x60cm x60cm including edge brick soling and plastering above GL... as directed by the deptt.

Supplying and fixing of 11Kv 150Amp D.O fuse set complete as required and as directed by the deptt.

Supplying and erection of LT Stayset complete (GI) with 19mm dia x 1.8m longstayrod anchorplate of size 30cm x30cmx 6.4mm thick. Thimble stay clamp from buckle (19mm x 60cm, 7x14 SWG dia GI Stay and strain Insulator etc. in CC Foundation as directed by the deptt.

Supplying and fixing of 11KV 5 KA LA (poly) set complete as required.

Suppply and Fixing 11KV 400Amp gang operated switch with all accessories complete as required and directed by the deptt.

Supplying with fitting and fixing of galvanised Channel of 100mm x 50mm x 6.5mm x 2200mm long complete with clamp, bolt, nut as required and directed by the deptt.

Supplying and erection of 11KV disc insulator (poly) 45KN with hardware fittings as required

Supplying including installation of 4inch dia GI Earth pipe complete as required

Supplying including installation of CT/PT combined metering system complete as required as per APDCL

Supplying and laying of following size solid aluminium conductor upto 10 Sq.mm balance standard conductor (XLPE) insulated core laid upto PVC ...CORE 1A2xy. 4x25m Single core unarmed cable

Supplying and string up AAAC racoon conductor in the existing PSC Pole with binding etc. as required and as directed by the deptt.

Supplying and erection of 11KV pin insulator (poly) with GI Pin, bolt and nut etc. as reqd. and as directed by deptt.

Supplying and laying of following size PVC/ XLPE insulated and PVC Sheathed 11KV grid solid aluminium conductor upto 10Sq.mm 3ohm 1/2core 95sq.mm 3ohm 1/2 core

Payment of APDCL supervsion charge, load security, meter security, cost of meter etc complete as required.

M/S Competent Infrastructure & Consulting Pvt. Ltd