MOEI , Fans installed at A B C D E F G H K L M , N Block, Vikas Bhawan, New Delhi

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group C

Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel conduit including dismantling as required. (a) Group C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

(d) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit etc as required. (a) 3 x 1.5 sq. mm

(b) 3 x 4 sq. mm

(c) 3 x 6 sq. mm

(d) 6 x 4 sq. mm

Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 12 way, Double door

Supplying and fixing of 5 Ampers to 32 Ampers rating, 240/415 Volts, 10 kA breaking capacity, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole

(b) Single pole and neutral

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 ampers tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (a) 8 way (4 + 24), Double door

(b) 12 way (4 + 36), Double door

Supplying and fixing of 20 Ampers, 240 Volts, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 Ampers “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying, installation, testing & commissioning of energy efficient 1400 mm sweep size ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on fan box etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supplying, installation, testing & commissioning of energy efficient 1200 mm sweep size ceiling fan, including wiring the down rod of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on fan box etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supply and fixing of 400 mm sweep size wall mounted fan complete with inbuilt Electronic Regulator, Blade, wire lead with moulded plug top etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supplying and installation of Heavy duty exhaust fan of 300 mm sweep size, 900 rpm speed with shutter & louvers in the existing opening alongwith connection, testing & commissioning etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supplying and installation of Heavy duty exhaust fan of 380 mm sweep size, 900 rpm speed with shutter & louvers in the existing opening alongwith connection, testing & commissioning etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supplying and installation of Fresh Air Fan of 250 mm sweep size (plastic body) in the existing opening connection, testing, commissioning etc. as required. including dismantling alongwith credit for worn out fan under buy back arrangement.

Supplying, installation, testing & commissioning of 20W to 22W, 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required at site . including dismantling alongwith credit for worn out luminaries under buy back arrangement.

Supplying, installation, testing & commissioning of energy efficient recessed mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required including dismantling alongwith credit for worn out fitting under buy back arrangement. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison.

Supplying, installation, testing & commissioning of energy efficient surface mounted type 30W to 36W LED panel luminaries of size 280mm x 1180mm (nominal size) including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable from slab to false ceiling including cutting the false ceiling, if required & repairing the damages & making good the same etc as required including dismantling & credit for old luminaries under buy back arrangement. The Total system Lumen of 30W to 36W LED should be 3000 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison.

Supplying, laying and fixing of following size PVC insulated and PVC sheathed/ XLPE aluminum conductor armoured power cable of 1.1 KV grade in following manner etc. as required. (a) 3 x 6 sq.mm on wall surface

(b) 3 x 6 sq.mm Direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying, laying and fixing of 4 x 25 sq.mm PVC insulated and PVC sheathed/ XLPE aluminum conductor armoured power cable of 1.1 KV grade etc as required in the following manner: (a) On wall surface

Supplying & fixing of energy efficient 10 watts wall mounted mirror LED luminaries (600mm) suitable to work on 230Volts, AC supply complete with connection & testing etc as required including dismantling alongwith credit for worn out luminaries under buy back arrangement.

Supplying, fixing of heavy duty double lock PVC channel of following size on surface of wall with cover etc as required. (a) 100 mm x 50 mm

Supplying, installation, testing & commissioning of energy efficient following capacity Split type Air Conditioner unit suitable for operation on 230 Volts, 50Hz, single phase capable of performing Cooling, Dehumidifying, Air Circulating & Filtering complete connection with upto 4 meters length refrigerant copper pipe heavy gauge 2"/8" / 3"/8" & 5/8" covered with minimum 10mm thickness insulation including 3 x 2.5 sq.mm flexible copper conductor wire wrapped in flexible pipe and also providing 25mm diameter PVC drain connection including accessories, fixing on surface with clamp to the nearest drain connection pipe complete with repairing of wall with minor civil work at site etc as required. a) Minimum 2.0 TR Capacity

Less Credit of following electrical accessories including dismantling etc complete as required. (a) TPDB with accessories.

(b) SPDB with accessories.

(c) Assorted PVC copper cable.

(d) Assorted XLPE aluminum cable

(e) Scrap iron / conduit / box

NAINI ELECTRICALS

SUGANDHA ELECTRICAL

Shaka Electrical (India)

Vivek Associates

Krishna Electreical Works