BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

276.00 aggregates 20 mm nominal size) and curing 1.00 cu.m

complete excluding cost of formwork in (A)

Foundation and Plinth

Painting of street light pole having post top lantern complete with primer with two coats of

Aluminium paint.

Painting of street light pole with bracket complete with two coats of Aluminium paint for

following size of pole.

278.00 (A) up to 4 mtr 1.00 Ea.

279.00 (B) up to 6 mtr. 1.00 Ea.

280.00 (C) up to 9 mtr 1.00 Ea.

281.00 (D) up to 10 to 13 mtr 1.00 Ea.

Supplying & erecting approved make time switch with single pole air break contacts suitable

for 230 V.15/16A.complete with self starting motor driven clock ‘ON’ &’ OFF’ automatic

arrangement at any predetermined time during each 24 hours,With nickel cadmium

rechargeable battery backup erected as directed.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative

and operate battery backup 1 channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum

& LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

Supplying and erecting approved make Segment time switch suitable for 230V+10%16A.

floating contacts with 24 hour dial having15/30 min. segments with early manual override

284.00 switching for on & off without influencing the program sequence with quartz time switch With 1.00 Ea.

power reserve, housed in fire proof thermoplastic enclosure & transparent cover terminal

covers erected as required wire necessary connection erected as directed.

Providing and erecting approved make light control unit suitable to operate on 230V +20%

having ON/OFF delay time of 30-50 seconds and having facility for Auto/manual system having

two LDR lens to intensity light having capacity of 5A complete erected on section pillar with

pipe and stand.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per

direction Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of

following capacity for switch On-Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside with hinged doors and locking

arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with

analog time switch, auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer in charge.

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole

having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary

wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and switchgears having door

not more than 1400mm x 300mm with waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel. (g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the

entire structure for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No. - 1, Bottom

293.00 Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x 1.00 Ea.

850 mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

[2] High Mast 14 Mtr. TOP A/F 105 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 1, Bottom

294.00 Thickness - 3 mm, Size Base Plate - dia.520 mm x 16 mm thick, Foundation Bolt Size M24 x 850 1.00 Ea.

mm, Qty - 8 Nos., Suitable for mounting Fitting of Light - 6 Nos.

[3] High Mast 16 Mtr. TOP A/F 150 mm, BOTTOM A/F 450 mm, No. of Sec. No. - 2, Bottom

Thickness - 4 mm, Top Sec. 3 mm, Size of Base Plate - dia.560 mm x 20 mm thick, Foundation

Bolt Size M24 x 880 mm, Qty - 8 Nos., Suitable for mounting Fitting of Light - 8 Nos.

[4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom

296.00 Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate - dia.630 mm x 20 mm thick, Foundation 1.00 Ea.

Bolt Size M24 x 870 mm, Qty - 12 Nos., Suitable for mounting Fitting of Light - 10 Nos.

[5] High Mast 18 Mtr. TOP A/F 150 Mm, BOTTOM A/F 450 Mm, No. of Sec. No. - 2, Bottom

297.00 Thickness - 4 mm, Top Sec. - 3 mm Size Base Plate - dia. 630 mm x 16 mm thick, Foundation 1.00 Ea.

Bolt Size M24 x 880 mm, Qty - 10 Nos., Suitable for mounting Fitting of Light - 10 Nos.

[6] High Mast 18 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom

Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate - dia. 580 mm x 20 mm thick, Foundation

Bolt Size M24 x 870 mm, Qty - 12 Nos., Suitable for mounting Fitting of Light - 12 Nos.

[7] High Mast 20 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom

299.00 Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -dia.580 mm x 20 mm thick, Foundation 1.00 Ea.

Bolt Size M27 x 850mm , Qty - 10 Nos., Suitable for mounting Fitting of Light - 12 Nos.

[8] High Mast 20 Mtr. TOP A/F 150 Mm, BOTTOM A/F 450 Mm, No. of Sec. No. - 2, Bottom

300.00 Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate - dia.580 mm x 20 mm thick, Foundation 1.00 Ea.

Bolt Size M13 x 1000mm, Qty - 10 Nos., Suitable for mounting Fitting of Light - 12 Nos.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

[9] High Mast 25 Mtr. TOP A/F 170 Mm, BOTTOM A/F 450 Mm, No. of Sec. No. - 3, Bottom

Thickness - 4 mm, Middle Base Sec.mm - 3, Top Sec. - 3 mm, Size Base Plate -dia. 680 mm x

mm thick, Foundation Bolt Size M30 x 1000 mm, Qty - 12 Nos., Suitable for mounting Fitting of

Light - 12 Nos.

[10] High Mast 25 Mtr. TOP A/F 170 Mm, BOTTOM A/F 540 Mm, No. of Sec. No. - 3, Bottom

Thickness - 4 mm, Middle Base Sec.mm - 4, Top Sec. - 3 mm, Size Base Plate - dia. 760 mm x

mm thick, Foundation Bolt Size M36 x 1000 mm, Qty - 12 Nos., Suitable for mounting Fitting of

Light - 16 Nos.

[11] High Mast 25 Mtr. TOP A/F 170 Mm, BOTTOM A/F 450 Mm, No. of Sec. No. - 2, Bottom

Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -dia. 680 mm x 35 mm thick, Foundation

Bolt Size M30 x 1000 mm, Qty - 12 Nos., Suitable for mounting Fitting of Light - 12 Nos.

[12] High Mast 25 Mtr. TOP A/F 170 Mm, BOTTOM A/F 540 Mm, No. of Sec. No. - 2, Bottom

304.00 Thickness - 5 mm, Top Sec. - 3 mm, Size Base Plate - dia.760 mm x 25 mm thick, Foundation 1.00 Ea.

Bolt Size M36 x 1000 mm, Qty - 12 Nos., Fitting of Light - 16 Nos.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminium housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) 10 to 12 Watts

305.00 Cat-ll 1.00 Ea.

306.00 Cat-lll 1.00 Ea.

(ii) 15 to 24 Watts

307.00 Cat-ll 1.00 Ea.

308.00 Cat-lll 1.00 Ea.

(iii) above 24 to 36 watts

309.00 Cat-ll 1.00 Ea.

310.00 Cat-lll 1.00 Ea.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 20 to 30 watts

311.00 Cat-ll 1.00 Ea.

312.00 Cat-lll 1.00 Ea.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 36 to 48 watts

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

313.00 Cat-ll 1.00 Ea.

314.00 Cat-lll 1.00 Ea.

(ii) above 48 to 60 Watts

315.00 Cat-ll 1.00 Ea.

316.00 Cat-lll 1.00 Ea.

(iii) Above 60 to 90 watts

317.00 Cat-ll 1.00 Ea.

318.00 Cat-lll 1.00 Ea.

(iv) above 90 to 120 watts

319.00 Cat-ll 1.00 Ea.

320.00 Cat-lll 1.00 Ea.

(v)above 120 to 160 watts

321.00 Cat-ll 1.00 Ea.

322.00 Cat-lll 1.00 Ea.

(vi)above 160 to 200 watts

323.00 Cat-ll 1.00 Ea.

324.00 Cat-lll 1.00 Ea.

(vii)above 200 to 250 watts

325.00 Cat-ll 1.00 Ea.

326.00 Cat-lll 1.00 Ea.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 40 to 48 watts

327.00 Cat-ll 1.00 Ea.

328.00 Cat-lll 1.00 Ea.

(ii) above 48 to 60 Watts

329.00 Cat-ll 1.00 Ea.

330.00 Cat-lll 1.00 Ea.

(iii) Above 60 to 90 watts

331.00 Cat-ll 1.00 Ea.

332.00 Cat-lll 1.00 Ea.

(iv) above 90 to 120 watts

333.00 Cat-ll 1.00 Ea.

334.00 Cat-lll 1.00 Ea.

(v) above 120 to 160 watts

335.00 Cat-ll 1.00 Ea.

336.00 Cat-lll 1.00 Ea.

(vi) above 160 to 200 watts

337.00 Cat-ll 1.00 Ea.

338.00 Cat-lll 1.00 Ea.

(vii) above 200 to 250 watts

339.00 Cat-ll 1.00 Ea.

340.00 Cat-lll 1.00 Ea.

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

341.00 Cat-ll 1.00 Ea.

342.00 Cat-lll 1.00 Ea.

343.00 Cat-ll 1.00 Ea.

344.00 Cat-lll 1.00 Ea.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Supplying and erecting LED Solar street lights with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed

with 36 hours battery backup & MPPT 24V,7.5 A charge controller with 12 hours automatic

switch on/off with wind speed resistance 44 m/s as per IEC

345.00 (A) 12W, IP-65, PV Module – 60W and 4 mtr poles complete erected 1.00 Ea.

346.00 (B) 15W, IP-65, PV Module – 80W and 4 mtr poles complete erected 1.00 Ea.

347.00 (C) 21W, IP-65, PV Module – 100W and 5 mtr poles complete erected 1.00 Ea.

348.00 (D) 28W, IP-65, PV Module –100W and 6 mtr poles complete erected 1.00 Ea.

349.00 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W and 6 mtr poles complete erected 1.00 Ea.

Supplying and Installation of Approved make Integrated LED Solar light fitting comprising in

built Poly crystalline solar panel,Lithium-ion 3.7 V battery, LED CRI Greater than 70, CCT-

6500K, 80 lum/watt all housed in Extruded Aluminium body,with motion sensor & auto on -

off device erected on existing pole with following specifications.

(A) 6 watt LED light, with 7 W Solar panel, 3.7 V 13000 to 15000 mAh battery, 450 lm luminus

flux, suitable for mount on 3 mtr height pole.

(B) 12 watt LED light, with 15 W Solar panel, 3.7 V 26000 to 28000 mAh battery, 850-900 lm

luminus flux, suitable for mount on 3.5 to 4 mtr height pole.

(C) 18 watt LED light, with 22 W Solar panel, 3.7 V 39500 to 40500 mAh battery, 1250-1350 lm

luminus flux,suitable for mount on 3.5 to 4 mtr height pole.

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt Lighting

Fitting with electronic driver. And lumen output from luminaire 720lm , input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to +60degC working

temperature, AL frame with Beam Angle 120deg

Supplying and Erecting Of L.E.D. type High bay fixture having Power Consumption of

following watts with, Input Voltage 110 - 290 V.AC with full efficiency, Power Factor >

with 50/60 HZ, CCVC LED Driver used for maximum power saving, Best Quality Aluminium

alloy housing and aluminium Dome for better heat dissipation, CCT Cool white (6000K), CRI

80, Beam angle > 120 degrees, working temperature -20 deg c to +55 deg c, Body IP

Supplying LED Portable/Rechargeable flood light having die - cast aluminium enclosure

designed for maximum thermal efficiency of 130lm luminous efficiency at voltage supply

between 140-270V AV/12V DC at operating temperature of -20 degree to 60degree celcius

with battery back up 3-4hrs

357.00 (A) up 10 Watt 1.00 Ea.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having

a Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display

RSSI, relay status, RTC time & diagnostics., Controller works on 3-phase & also on any available

1-Phase., Controller with 8-hour battery backup during external power failure. External power

failure alert immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range.,

Standby power consumption <3W., Smart 4G Timer with RS232 port for DLMS Energy meter.,

Smart 4G Timer must be compatible with any make / brand of DLMS (RS232) Energy Meter.,

DI: 4 Nos. (3 Contactor / Latch detection, 1 for Door Sensor.)., DO: 3 Relays for Independent

control each phase (R, Y, B) with 1 extra spare relay., Smart 4G Timer with dual SIM

functionality for connectivity backup., 4G M2M SIM 3-Year communication included., Local

configuration via WiFi / BLE for maintenance or during force majeure., GPS chip inbuilt of

Smart 4G Timer for auto loca on tracking & astronomic schedule loca on., 50 programmable

schedules., Astronomic scheduling with monthly offsets., Smart 4G Timer has inbuilt timer

stores schedules locally & also stores schedule execution logs locally, syncs to cloud whenever

connected to cloud., Auto-scheduler overrides manual operations., Monitoring & alerts for

MCB trips., Over/under voltage, current, overload, power factor & short circuit protections

with alerts via Dashboard, App, SMS, WhatsApp & Email., Contactor / Latch chattering

protection & alerts., Smart 4G Timer with neutral failure protection and alert., Bulit-in

Watchdog for anti-jamming.,

Smart 4G Timer must send Regular "heartbeat" on software for CCMS status., Accelerometer

for tamper & panel movement detection & alerts., Smart 4G Timer must be tested from an

NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV

(IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11), Damp Heat Test (40 Deg C

@ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest) with all test passing

criteria as “Temporary degradation or loss of function or performance which is self-

recoverable”., FOTA functionality required for upgrades., Smart 4G Timer sends & stores

online/offline data of controller & load for lamp burn hours analysis.,

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

'It stores & syncs connectivity logs for configuration of network connections & analytics.,

PANEL & SWITCHGEAR, The panel includes a Class 1 DLMS energy meter NABL approved with 1-

2 months of stored data of daily, hourly, monthly, load survey, instantaneous, events, tamper

data & with power events stored in meter memory for audit purpose., Must monitor V, I, KWH,

KVA, PF, KVAH, etc., Panel made with 2 mm CRCA sheet with ground mountable stand

complete with gland plate, waterproof glands, earthing bolt., IP55, weatherproof panel with

RAL7035 powder-coated., Smart 4G Timer must be fitted on removable terminal sockets for

easy maintenance., Switchgear includes 3 Nos. 3 pole Contactor / Latch having minimum 50 A

Load carrying capacity per phase, all other switchgear & wires: 40 A load carrying capacity.,

Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise Bypass

MCBs required., 4P RCCB 100 mA., door sensor. Also, provide lock & key facility., Panel mount

outdoor antenna for GSM, GPS., Canopy design for draining down water., CCMS SMART

SOFTWARE, OAuth 2.0 APIs for sending data to Government clouds/software, etc., CCMS Web

dashboard with secure password & OTP login., Hosted on trusted cloud, data security,

antivirus & attack protection., HTTPS., AES256-bit encryption., Vulnerability Assessment and

Penetration Testing (VAPT) certificate for CCMS Software., Streetlight management software

for load status, live analytics & reports., Energy meter data tables (kW, kWh, PF, I, V, etc.)

available., Utility monthly bill reconciliation & Class 1 accuracy reports for billing, energy

monitoring & auditing for streetlight load., Fault detection., Light fault 99% analysis on

dashboard using energy monitoring., WhatsApp integration., Hierarchy-wise reporting &

alerts., GIS mapping of live connected streetlight control panels, poles & streetlights., MQTT

protocol., Smartphone app with local configuration & navigation., Monitoring & reporting of

lighting parameters., Facility for media attachments for site photos/videos/work

permits/checklists, etc. per Feeder Panel for remote verifica on., Asset management module

for streetlight infrastructure data., Complaint/service task management with history &

escalation must be available., Android & iOS App for dashboard analytics, graphs, energy data,

alerts., 3 Years CCMS Web Software & Cloud Server Hosting subscription included.,

Customizable, user-friendly dashboard.,

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having

a Smart Panel comprising of 1 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display

RSSI, relay status, RTC time & diagnostics., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to cloud., 110-630 V AC @ 50-

60 Hz – 1 phase operating range., Standby power consumption <3W., Smart 4G Timer with

RS232 port for DLMS Energy meter., Smart 4G Timer must be compatible with any make /

brand of DLMS (RS232) Energy Meter., DI: 2 Nos. (1 Contactor / Latch detection, 1 for Door

Sensor.)., DO: 1 Relay for control with 1 extra spare relay., Smart 4G Timer with dual SIM

functionality for connectivity backup., 4G M2M SIM 3-Year communication included., Local

configuration via WiFi / BLE for maintenance or during force majeure., GPS chip inbuilt of

Smart 4G Timer for auto location tracking & astronomic schedule location., 50 programmable

schedules., Astronomic scheduling with monthly offsets.,

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

'Smart 4G Timer has inbuilt timer stores schedules locally & also stores schedule execution logs

locally, syncs to cloud whenever connected to cloud., Auto-scheduler overrides manual

operations., Monitoring & alerts for MCB trips., Over/under voltage, current, overload, power

factor & short circuit protections with alerts via Dashboard, App, SMS, WhatsApp & Email.,

Contactor / Latch chattering protection & alerts., Smart 4G Timer with neutral failure

protection and alert., Bulit-in Watchdog for anti-jamming., Smart 4G Timer must send Regular

"heartbeat" on software for CCMS status., Accelerometer for tamper & panel movement

detection & alerts., Smart 4G Timer must be tested from an NABL Lab for Surge Test @ 6 KV

(IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz (CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of

12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest) with all test passing criteria as “Temporary

degradation or loss of function or performance which is self-recoverable”., FOTA functionality

required for upgrades., Smart 4G Timer sends & stores online/offline data of controller & load

for lamp burn hours analysis., It stores & syncs connectivity logs for configuration of network

connections & analytics., PANEL & SWITCHGEAR, The panel includes a Class 1 DLMS energy

361.00 meter NABL approved with 1-2 months of stored data of daily, hourly, monthly, load survey, 1.00 Ea.

instantaneous, events, tamper data & with power events stored in meter memory for audit

purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel made with 2 mm CRCA sheet

with ground mountable stand complete with gland plate, waterproof glands, earthing bolt.,

IP55, weatherproof panel with RAL7035 powder-coated., Smart 4G Timer must be fitted on

removable terminal blocks for easy maintenance., Switchgear includes 1 Nos. 3 pole Contactor

/ Latch having minimum 50 A Load carrying capacity per phase, all other switchgear & wires:

40 A load carrying capacity., 1 Nos. 2P MCB 10 kA for Incomer & 2 Nos. 1P MCBs 10 kA for

Outgoing., Phase Bypass MCBs required., 2P RCCB 100 mA., door sensor. Also, provide lock &

key facility., Panel mount outdoor antenna for GSM, GPS., Canopy designed for draining down

water., SOFTWARE, OAuth 2.0 APIs for sending data to Government

clouds/software, etc., CCMS Web dashboard with secure password & OTP login., Hosted on

trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit encryption.,

Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS Software.,

Streetlight management software for load status, live analytics & reports., Energy meter data

tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill reconciliation & Class 1 accuracy

reports for billing, energy monitoring & auditing for streetlight load., Fault detection., Light

fault 99% analysis on dashboard using energy monitoring., WhatsApp integration., Hierarchy-

wise reporting & alerts., GIS mapping of live connected streetlight control panels, poles &

streetlights., MQTT protocol., Smartphone app with local configuration & navigation.,

Monitoring & reporting of lighting parameters., Facility for media attachments for site

photos/videos/work permits/checklists, etc. per Feeder Panel for remote verification., Asset

management module for streetlight infrastructure data., Complaint/service task management

with history & escalation must be available.,

Android & iOS App for dashboard analytics, graphs, energy data, alerts., 3 Years CCMS Web

Software & Cloud Server Hosting subscription included., Customizable, user-friendly

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having

a Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display

RSSI, relay status, RTC time & diagnostics., Controller works on 3-phase & also on any available

1-Phase., Controller with 8-hour battery backup during external power failure. External power

failure alert immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range.,

Standby power consumption <3W., Smart 4G Timer with RS232 port for DLMS Energy meter &

RS485/UART/RS232 port for any external device communication., Smart 4G Timer must be

compatible with any make / brand of DLMS (RS232) Energy Meter., DI: 5 Nos. (3 Contactor /

Latch detection, 1 for SPD, 1 for Door Sensor.)., DO: 3 Relays for Independent control each

phase (R, Y, B) with 1 extra spare relay., Highly Precise TCXO RTC with 10-year battery reserve.,

Automatically syncs with internal, cellular, server & GPS clock; with logs stored in the CCMS

Web Software., Smart 4G Timer with dual SIM functionality for connectivity backup., 4G M2M

SIM 5-Year communication included., Local configuration via WiFi / BLE for maintenance or

during force majeure., GPS chip inbuilt of Smart 4G Timer for auto location tracking &

astronomic schedule location., 50 programmable schedules., Astronomic scheduling with

monthly offsets., Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to cloud., Auto-scheduler

overrides manual operations., Monitoring & alerts for MCB trips & SPD failure., Over/under

voltage, current, overload, power factor & short circuit protections with alerts via Dashboard,

App, SMS, WhatsApp & Email., Contactor / Latch chattering protection & alerts., Smart 4G

Timer with neutral failure protection and alert., During earthing failure to Panel, it must

generate alerts on CCMS Dashboard for safety., Bulit-in Watchdog for anti-jamming., Smart 4G

Timer must send Regular "heartbeat" on software for CCMS status., Accelerometer for tamper

& panel movement detection & alerts.,

Smart 4G Timer must be tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD

Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part

5/Sec.2):1981 latest) with all test passing criteria as “Temporary degradation or loss of function

or performance which is self-recoverable”., FOTA functionality required for upgrades., Smart

4G Timer sends & stores online/offline data of controller & load for lamp burn hours analysis.,

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

It stores & syncs connectivity logs for configuration of network connections & analytics.,

PANEL & SWITCHGEAR, The panel includes a Class 1 DLMS energy meter NABL approved with 1-

2 months of stored data of daily, hourly, monthly, load survey, instantaneous, events, tamper

data & with power events stored in meter memory for audit purpose., Must monitor V, I, KWH,

KVA, PF, KVAH, etc., Panel made with 2 mm CRCA sheet with ground mountable stand

complete with gland plate, waterproof glands, earthing bolt., Panel to have transparent

window to view DISCOM Energy Meter display., IP55, weatherproof panel with RAL7035

powder-coated., Smart 4G Timer must be fitted on removable terminal sockets for easy

maintenance., Switchgear includes 3 Nos. 3 pole Contactor / Latchs having minimum 100 A

Load carrying capacity per phase, all other switchgear & wires: 60 A load carrying capacity.,

Contactor / Latch rating such that spare load like decorative lights can be operated., Spare

Pole Contactor / Latch (1 Nos.) also available in panel for replacement during failure., 1 Nos. 4P

MCB 10 kA for Incomer & 9 Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise Bypass MCBs

required., 4P RCCB 100 mA., 40kA, 335V smart SPD with feedback detection to send alert of

SPD failure to CCMS web software., Suitable 3 Phase RYBN 415 V AC isolation transformer for

control circuit stable feed., 1 Nos. Input & 3 Nos. Output RYBN TPN connectors for reliable &

safe termination., 4 Nos. DIN Rail Type R, Y, B indicators for each TPN connector., 2 Door Panel.

1 in Front & 1 at Back., door sensor. Also, provide lock & key facility., High quality ISI/BIS, FR

Cables to be used., Double lugging to be avoided for potential fire hazard., Minimum

Dimensions of Panel: 1100 x 650 x 550 mm & stand height dimensions: 700 mm., Panel must

have clear 20% spare space for future upgradation., Panel must be equipped with standard

Indian type plug with 6 A 2 pole MCB & including light indicator.,

Panel must contain min. 150 mm space at bottom (TPN connector end) for cable

terminations., Automatic door sensor based light (with protection MCB) for

viewing/maintenance., Thermostat & Space heater (with protection MCB) for cold weather

conditions with automatic on/off controller., Panel must have adequate provision to mount

DISCOM Energy meter along with spare space around it., The switchgear compartment must

have cover on top with protective transparent 4 mm acrylic sheet, with accessible window to

operate switchgear components., Switch gear, energy meter & Smart 4G Timer must be

warranted for 5 years., Panel mount outdoor antenna for GSM, GPS., Canopy design for

draining down water., CCMS SMART SOFTWARE, OAuth 2.0 APIs for sending data to

Government clouds/software, etc., CCMS Web dashboard with secure password & OTP login.,

Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit

encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy

meter data tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill reconciliation & Class

accuracy reports for billing, energy monitoring & auditing for streetlight load., Fault detection.,

Light fault 99% analysis on dashboard using energy monitoring., WhatsApp integration.,

Hierarchy-wise reporting & alerts., GIS mapping of live connected streetlight control panels,

poles & streetlights., MQTT protocol., Smartphone app with local configuration & navigation.,

Monitoring & reporting of lighting parameters., Facility for media attachments for site

photos/videos/work permits/checklists, etc. per Feeder Panel for remote verification., Asset

management module for streetlight infrastructure data., Complaint/service task management

with history & escalation must be available., Android & iOS App for dashboard analytics,

graphs, energy data, alerts., 5 Years CCMS Web Software & Cloud Server Hosting subscription

included., Customizable, user-friendly dashboard.,

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having

a Smart Panel comprising of 1 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display

RSSI, relay status, RTC time & diagnostics., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to cloud., 110-630 V AC @ 50-

60 Hz – 1 phase operating range., Standby power consumption <3W., Smart 4G Timer with

RS232 port for DLMS Energy meter & RS485/UART/RS232 port for any external device

communication., Smart 4G Timer must be compatible with any make / brand of DLMS (RS232)

Energy Meter., DI: 3 Nos. (1 Contactor / Latch detection, 1 for SPD, 1 for Door Sensor.)., DO:

Relay for control with 1 extra spare relay., Highly Precise TCXO RTC with 10-year battery

reserve., automatically syncs with internal, cellular, server & GPS clock; with logs stored in the

CCMS Web Software., Smart 4G Timer with dual SIM functionality for connectivity backup., 4G

M2M SIM 5-Year communication included., Local configuration via WiFi / BLE for maintenance

or during force majeure., GPS chip inbuilt of Smart 4G Timer for auto location tracking &

astronomic schedule location., 50 programmable schedules., Astronomic scheduling with

monthly offsets., Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to cloud., Auto-scheduler

overrides manual operations., Monitoring & alerts for MCB trips & SPD failure., Over/under

voltage, current, overload, power factor & short circuit protections with alerts via Dashboard,

App, SMS, WhatsApp & Email., Contactor / Latch chattering protection & alerts., Smart 4G

Timer with neutral failure protection and alert., During earthing failure to Panel, it must

generate alerts on CCMS Dashboard for safety., During earthing failure to Panel. it must

generate alerts on CCMS Dashboard for safety., Bulit-in Watchdog for anti-jamming., Smart 4G

Timer must send Regular "heartbeat" on software for CCMS status., Accelerometer for tamper

& panel movement detection & alerts.,

Smart 4G Timer must be tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD

Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part

5/Sec.2):1981 latest) with all test passing criteria as “Temporary degradation or loss of function

or performance which is self-recoverable”., FOTA functionality required for upgrades., Smart

4G Timer sends & stores online/offline data of controller & load for lamp burn hours analysis.,

It stores & syncs connectivity logs for configuration of network connections & analytics., PANEL

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

The panel includes a Class 1 DLMS energy meter NABL approved with 1-2 months of stored

data of daily, hourly, monthly, load survey, instantaneous, events, tamper data & with power

events stored in meter memory for audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH,

etc., Panel made with 2 mm CRCA sheet with ground mountable stand complete with gland

plate, waterproof glands, earthing bolt., Panel to have transparent window to view DISCOM

Energy Meter display., IP55, weatherproof panel with RAL7035 powder-coated., Smart 4G

363.00 Timer must be fitted on removable terminal blocks for easy maintenance., Switchgear includes 1.00 Ea.

1 Nos. 3 pole Contactor / Latch having minimum 100 A Load carrying capacity per phase, all

other switchgear & wires: 60 A load carrying capacity., Contactor / Latch rating such that spare

load like decorative lights can be operated., Spare 3 Pole Contactor / Latch (1 Nos.) also

available in panel for replacement during failure., 1 Nos. 2P MCB 10 kA for Incomer & 3 Nos.

1P MCBs 10 kA for Outgoing., Phase Bypass MCBs required., 2P RCCB 100 mA., 40kA, 335V

smart SPD with feedback detection to send alert of SPD failure to CCMS web software.,

Suitable 1 Phase 415 V AC isolation transformer for control circuit stable feed., 1 Nos. Input &

Nos. Output TPN connectors for reliable & safe termination., 2 Nos. DIN Rail Type power line

indicators for each TPN connector., 2 Door Panel. 1 in Front & 1 at Back., door sensor. Also,

provide lock & key facility., High quality ISI/BIS, FR Cables to be used., Double lugging to be

avoided for potential fire hazard., Minimum Dimensions of Panel: 700 x 500 x 550 mm & stand

height dimensions: 700 mm., Panel must have clear 20% spare space for future upgradation.,

Panel must be equipped with standard Indian type plug with 6 A 2 pole MCB & including light

indicator., Panel must contain min. 150 mm space at bottom (TPN connector end) for cable

terminations. Automatic door sensor based light (with protection MCB) for

viewing/maintenance., Thermostat & Space heater (with protection MCB) for cold weather

conditions with automatic on/off controller., Panel must have adequate provision to mount

DISCOM Energy meter along with spare space around it. The switchgear compartment must

have cover on top with protective transparent 4 mm acrylic sheet, with accessible window to

operate switchgear components.,

, Switch gear, energy meter & Smart 4G Timer must be warranted for 5 years., Panel mount

outdoor antenna for GSM, GPS., Canopy designed for draining down water., SOFTWARE,

OAuth 2.0 APIs for sending data to Government clouds/software, etc., CCMS Web dashboard

with secure password & OTP login., Hosted on trusted cloud, data security, antivirus & attack

protection., HTTPS., AES256-bit encryption., Vulnerability Assessment and Penetration Testing

(VAPT) certificate for CCMS Software., Streetlight management software for load status, live

analytics & reports., Energy meter data tables (kW, kWh, PF, I, V, etc.) available., Utility

monthly bill reconciliation & Class 1 accuracy reports for billing, energy monitoring & auditing

for streetlight load., Fault detection., Light fault 99% analysis on dashboard using energy

monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts., GIS mapping of live

connected streetlight control panels, poles & streetlights., MQTT protocol., Smartphone app

with local configuration & navigation., Monitoring & reporting of lighting parameters., Facility

for media attachments for site photos/videos/work permits/checklists, etc. per Feeder Panel

for remote verification., Asset management module for streetlight infrastructure data.,

Complaint/service task management with history & escalation must be available., Android &

iOS App for dashboard analytics, graphs, energy data, alerts., 5 Years CCMS Web Software &

Cloud Server Hosting subscription included., Customizable, user-friendly dashboard.,

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Supply of Smart Streetlight Control & Monitoring System having an Individual Streetlight

Controller(iSLC) for control, monitoring, & fault detection of each streetlight., Equipped with a

32-bit CPU., Operates on 90V to 600V AC., Has 1 output for 0%-100% dimming & compatible

with 0-10 V LED dimmable driver., Individual streetlight Cloud software-based dimming &

scheduled dimming for each streetlight., User-adjustable dimming intensity., iSLC must be

tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-

2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11), Cold Test (-

10 deg C) for 4 hours IS: 9000 (Part 2/Secc.4):1977 latest, Damp Heat Test (40 Deg C @ 95%

RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest), Ingress Protection for IP65 as

per IEC 60529 with all test passing criteria as “Temporary degradation or loss of function or

performance which is self-recoverable”., Pole mount clamps for iSLC installation. Operates on

IoT Mesh WiFi / Wi-Sun / Zigbee / LoRaWAN technologies., Bidder must provide backhaul

infrastructure for communication technology for 5 years., iSLC with in-built energy monitoring

chip., Must monitor V, I, PF, F, KW, KWh., Built-in Surge protection., “Fail-safe”: iSLC ensures

lights remain ON when iSLC fails., Accelerometer inside iSLC for pole movement alert., Failure

of one iSLC will not affect others., Local configuration via WiFi / BLE for maintenance or during

force majeure., In-built GPS chip for iSLC precise mapping & astronomic location.,

Programmable dimming schedules daily, monthly, yearly, special events, astro-clock for

sunset/sunrise time with monthly offset., Live status of iSLC & streetlight monitored online.,

Lamp burn hours are monitored via CCMS Software., The iSLC must be warranted for 5 years

against manufacturing defects., CCMS SMART SOFTWARE , OAuth 2.0 API for sending data to

Government clouds, servers, software., CCMS Web dashboard with secure password & OTP

login., iSLC software must integrate with Group Controller or operate on a common platform.,

Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit

encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy

meter data (kW, kWh, PF, I, V, etc.) available., Utility data reconciliation & Class 1 accuracy

reports for billing., Energy monitoring & auditing for streetlight infrastructure., Fault detection

& alerts., Customizable CCMS Software., WhatsApp integration, SMS & Email Alerts., Hierarchy-

wise reporting & alerts., GIS mapping of live connected streetlight control panels &

streetlights., OTA updates., Smartphone app with local configuration & navigation., Monitoring

& reporting of lighting parameters., Work permits, media attachments for site photos etc. per

Feeder Panel for remote verification., Asset management module for streetlight infrastructure

data & GIS mapping., Complaint/service management with history & escalation must be

available., Includes 5 years of data hosting, communication, & cloud services with CCMS Web

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Supply of Smart Streetlight Control & Monitoring System having an Individual Streetlight

Controller(iSLC) for control, monitoring, & fault detection of each streetlight., Equipped with a

32-bit CPU., Operates on 90V to 600 V AC., Has 1 output for 0%-100% dimming & compatible

with 0-10 V LED dimmable driver., Individual streetlight Cloud software-based dimming,

scheduled dimming & motion-based dimming for each streetlight., ISLC with in-built

Microwave Motion Sensor. Motion sensor based adaptive dimming facility to turn 100% in

streetlights ahead when vehicle/pedestrian approaches. It must be cloud-based settable to set

number of ahead streetlights to be brightened., Microwave Motion sensor detection range

upto 9 m., Synchronized with other zones streetlight mesh networks via roaming trigger., User-

adjustable dimming intensity., iSLC must be tested from an NABL Lab for Surge Test @ 6 KV

(IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz (CISPR11), Cold Test (-10 deg C) for 4 hours IS: 9000 (Part 1.00 Ea.

2/Secc.4):1977 latest, Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS:

(Part 5/Sec.2):1981 latest), Ingress Protection for IP65 as per IEC 60529 with all test passing

criteria as “Temporary degradation or loss of function or performance which is self-

recoverable”., Includes Clamps to install iSLC on Pole with iSLC angle position (0 Deg. To

Deg.) adjustment facility., Operates on IoT Mesh WiFi / Wi-Sun / Zigbee / sub-GHz

technologies., Bidder must provide backhaul infrastructure for communication technology for

5 years., ISLC with in-built energy monitoring chip. Must monitor V, I, PF, F, KW, KWh., Built-in

Surge protection., “Fail-safe”: iSLC ensures lights remain ON when iSLC fails., Accelerometer

inside iSLC for pole movement alert., Failure of one iSLC will not affect others., Local

configuration via WiFi / BLE for maintenance or during force majeure., In-built GPS chip for

iSLC precise mapping & astronomic location.,

Programmable dimming schedules daily, monthly, yearly, special events, astro-clock for

sunset/sunrise time with monthly offset., Live status of iSLC & streetlight monitored online.,

Lamp burn hours are monitored via CCMS Software., The iSLC must be warranted for 5 years

against manufacturing defects., CCMS SMART SOFTWARE, OAuth 2.0 API for sending data to

Government clouds, servers, software., CCMS Web dashboard with secure password & OTP

login., iSLC software must integrate with Group Controller or operate on a common platform.,

Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit

encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy

meter data (kW, kWh, PF, I, V, etc.) available., Utility data reconciliation & Class 1 accuracy

reports for billing., Energy monitoring & auditing for streetlight infrastructure., Fault detection

& alerts., Customizable CCMS Software., WhatsApp integration, SMS & Email Alerts., Hierarchy-

wise reporting & alerts., GIS mapping of live connected streetlight control panels &

streetlights., OTA updates., Smartphone app with local configuration & navigation., Monitoring

& reporting of lighting parameters., Work permits, media attachments for site photos etc. per

Feeder Panel for remote verification., Asset management module for streetlight infrastructure

data & GIS mapping., Complaint/service management with history & escalation must be

available., Includes 5 years of data hosting, communication, & cloud services with CCMS Web

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as directed.

366.00 (a) 0.75 Sq.mm twin twisted 1.00 Mtr.

367.00 (b) 1.00 Sq.mm twin twisted 1.00 Mtr.

368.00 (c) 1.00 Sq.mm 2 core round/ flat PVC sheathed 1.00 Mtr.

369.00 (d) 1.50 Sq.mm 2 core round PVC sheathed 1.00 Mtr.

370.00 (e) 1.50 Sq.mm 3 core round PVC sheathed 1.00 Mtr.

371.00 (f) 1.50 Sq.mm 4 core round PVC sheathed 1.00 Mtr.

372.00 (g) 2.50 Sq.mm 2 core round PVC sheathed 1.00 Mtr.

373.00 (h) 2.50 Sq.mm 3 core round PVC sheathed 1.00 Mtr.

374.00 (i) 2.50 Sq.mm 4 core round PVC sheathed 1.00 Mtr.

375.00 (j) 4.00 Sq.mm 3 core round PVC sheathed 1.00 Mtr.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

376.00 (k) 4.00Sq.mm 4 core round PVC sheathed 1.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

377.00 (A) 2 core 2.5 Sq. mm 1.00 Mtr.

378.00 (B) 2 core 4 Sq. mm 1.00 Mtr.

379.00 (C) 2 core 6 Sq. mm 1.00 Mtr.

380.00 (D) 2 core 10 Sq. mm 1.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable.

381.00 (A) 3 core 2.5Sq. mm 1.00 Mtr.

382.00 (B) 3 core 4 Sq. mm 1.00 Mtr.

383.00 (C) 3 core 6 Sq. mm 1.00 Mtr.

384.00 (D) 3 core 10 Sq. mm 1.00 Mtr.

385.00 (E) 3 core 16 Sq. mm 1.00 Mtr.

386.00 (F) 3 core 25 Sq. mm 1.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

387.00 (A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 1.00 Mtr.

388.00 (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 1.00 Mtr.

389.00 (C) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core) 1.00 Mtr.

390.00 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 1.00 Mtr.

391.00 (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 1.00 Mtr.

392.00 (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 1.00 Mtr.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised

393.00 iron pipe with coupling and buch buried in specially prepared earth pit complete with 1.00 Ea.

necessary 8 SWG earth wire.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

394.00 necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG 1.00 Ea.

erected & connected as directed (For panel)

395.00 For using salt and charcoal / coke as required for pipe type earthing. 1.00 Ea.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

396.00 Length of pipe - 1 Mtr 1.00 Ea.

Back filling compound - 1 Nos Bag of 15 Kg.

(b)For Electrical installation up to 11 KV in normal soil.

397.00 Length of Pipe : 2.00 mtrs 1.00 Ea.

Back filling Compound :1 no. Bag of 25 Kg.

398.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 1.00 Kg.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

399.00 Cat-ll 1.00 Ea.

400.00 ICS=100% of ICU only Cat III 1.00 Ea.

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

401.00 Cat-ll 1.00 Ea.

402.00 ICS=100% of ICU only Cat III 1.00 Ea.

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing

403.00 Cat-ll 1.00 Ea.

404.00 ICS=100% of ICU only Cat III 1.00 Ea.

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

405.00 Cat-ll 1.00 Ea.

406.00 ICS=100% of ICU only Cat III 1.00 Ea.

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A. with

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

407.00 Cat-ll 1.00 Ea.

408.00 ICS=100% of ICU only Cat III 1.00 Ea.

Supplying & erecting approved make Four Pole 415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty confirming to IS for

409.00 Cat-ll 1.00 Ea.

410.00 Cat-lll 1.00 Ea.

411.00 Cat-ll 1.00 Ea.

412.00 Cat-lll 1.00 Ea.

413.00 Cat-ll 1.00 Ea.

414.00 Cat-lll 1.00 Ea.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts

complete with 415V/220V operating coil suitable for (L&T, BCH,T.C., Siemens, C&S make).

415.00 (A) for 25 / 32 A rating 1.00 Ea.

416.00 (B) for 40 A rating 1.00 Ea.

417.00 (C) for 60 / 70 A rating 1.00 Ea.

418.00 (D) For 80 / 95 A Rating 1.00 Ea.

419.00 (E) for 110 A rating 1.00 Ea.

Providing & erecting electronic overload relay with single phasing preventer [ (L&T, Alstom,

BCH,T.C., Siemens, C&S make).

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR ANNUAL RATE CONTRACT FOR SITC WORK OF STREET LIGHT FOR NADIAD MUNICIPAL CORPORATION, NADIAD

ITEM NO DESCRIPTION UNIT Final Rate

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp.

424.00 Cat.II 1.00 Ea.

425.00 Cat.III 1.00 Ea.

427.00 Cat.II 1.00 Ea.

428.00 Cat.III 1.00 Ea.

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

429.00 Cat.III 1.00 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

431.00 Cat.II 1.00 Ea.

432.00 Cat.III 1.00 Ea.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following

(A) 6 to 32 Amp.

434.00 Cat.II 1.00 Ea.

435.00 Cat.III 1.00 Ea.

437.00 Cat.II 1.00 Ea.

438.00 Cat.III 1.00 Ea.

I / We am / are willing to carry out above work at .................. % above / below. In words ..................... percentage above / below the

tender rate, which mentioned above.

Or any other Item subjected to the ARC work required as per the necessary/instruction, items shall be executed as per the SOR rate with

the effect of above / below for this tender.

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. Bidder has to quote rates without GST, GST will be applicable extra on tender rate.

Stamp with signature of contractor