Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹97.0 L
EMD Value
₹98,000
Closing Date
19 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, R&B Division, Amreli
Construction C.C. Road on Chadiya Lapaliya Road k.m. 2/400 to 2/800 at Amreli, Ta. & Dist. Amreli.
365064
20 of 2026-27
Open
Civil Works - Roads
Works
Amreli
6 documents required · 6 mandatory
₹2,400
Executive Engineer, R and B Division, Amreli
₹98,000
10 Nov 2026
10 Nov 2026
10 Nov 2026
19 Nov 2026
10 Nov 2026
90 days
BILL OF QUANTITY
Rates Total Amount As
Rates Total Amount As
Sr.no. Description of item Unit Per Estimated
In figure Quantities
1 Box cutting the road surface to proper slope and camber for making a base
for road work including removing the excavated stuff and depositing on the 2054.00 Cum 109.42
road side slope as directed upto 50Mt.lead.
2 Construction of granular sub-base by providing close graded Material, mixing
in a mechanical mix plant at OMC, carriage of mixed Material to work site,
spreading in uniform layers with motor grader on prepared surface and 608.00 Cum 1037.00
compacting with vibratory power roller to achieve the desired density,
complete as per clause 401 for grading- I Material
3 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone
aggregate to wet mix macadam specification including premixing the
Material with water at OMC in mechanical mix plant carriage of mixed
Material by tipper to site, laying in uniform layers with paver in sub- base /
base course on well prepared surface and compacting with vibratory roller
to achieve the desired density.) Bottom Layer 150mm thick (RA)
4 Providing and filling in foundation with ordinary Cement concrete M-100 mix
and providing necessary vertical pin headers including formwork, vibrating, 442.00 Cum 3345.59
ramming and curing complete.
5 Construction of plain, un-reinforced, dowel-jointed cement concrete
pavement over prepared sub base, with concrete grade M -25, using 53-
grade cement @ 380 kg/m3, coarse & fine aggregates conforming to IS:383
(max coarse agg. 25 mm), mixed in batching plant, transported to site, laid
using fixed/manual formwork, compacted and finished with hand/portable
equipment, provision for laying LDPE Sheet (125 minimum) & microns
contraction/expansion/construction/longitudinal joints, dowel bars, tie
rods, joint filler, debonding strip, sealant primer, joint sealant, approved
admixtures, curing, finishing to lines and grades as per drawings and
directions of Engineer-in-Charge.
6 Road marking with hot applied thermoplastic paints with reflectorising glass
beads on bitumin surface providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads @ 250gms per
sqm area, thickness of 2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level, uniform and free from
streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide liminance coefficinet on
cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min
100 mcd/m2/lux during the service life during the day time. The marking
should meet the performance criteria for night time reflectivity, wet
reflectivity and skid resistance as mentioned in the section-15 of IRC 35-
2015. Warranty for the Retro reflectivity should be two years.
Name of Work -:
Construction C.C. Road on Chadiya Lapaliya Road Km. 2/400 to 2/800 At Amreli, Ta. & Dist. Amreli
BILL OF QUANTITY
Rates Total Amount As
Rates Total Amount As
Sr.no. Description of item Unit Per Estimated
In figure Quantities
7 Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of
polycarbonate and ABS moulded body and reflective panels with Micro
prismatic lens (No Glass bead lens) capable of providing total internal
reflection of the light entering the lens face and shall support a load of
13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 Ð
DO III Dt 11.06. 1997. The height, width and length shall not exceed 20 mm, 578.00 Nos. 217.41
130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each
side and the slope to the base shall be 35 +/- 5 degree. The body of the
marker should having finger grip for easy and accurate placement and
application with epoxy / bituminous Adhesive as recommended by the
manufacturer of the marker. The color of the marker should be as per the
IRC 35-2015 and as directed by Engineer-in-charge.
8 Supplying, stacking, spreading, rolling and watering hard murrum as directed
for side shoulder as directed with 5 km lead. (RA)
9 Demolition including stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift. (i) R.C.C. work
10 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with
collars for culverts including setting and joining the pipes in C.M. 1:2
watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by
vertically vibrated technology of following internal diameter. (i) 300 mm dia.
11 Excavation for foundation in sand, gravel, clay soft soils and murrum etc.
including shoring, strutting dewatering as necessary and disposing of the
excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m for
12 Providing and casting in situ controlled cement concrete M-200 for R.C.C.
return as per drawings including centering shuttering, scaffolding where
necessary, laying vibrating, curing and finishing complete.(A) Height from
0.0 to 5.0 M. (1) Piers (2) Abutment (3) RCC return
13 Providing and laying in position FE 500D TMT bar reinforcement including
cutting, bending, hooking and tying complete as per detailed drawings for 2.156 Mt. 73858.70
the following.(A) Piers (B) Abutments (C) R.C.C. Returns
14 Providing & laying weep hole in Aburtments, and returns by using A.C. pipe
of 100mm including laying in proper grede and jointing the completed as per
detailed specification. Sheeting 125 micron thick (including 5% Overlap)and
curing etc. complete.
Name of Work -:
Construction C.C. Road on Chadiya Lapaliya Road Km. 2/400 to 2/800 At Amreli, Ta. & Dist. Amreli
BILL OF QUANTITY
Rates Total Amount As
Rates Total Amount As
Sr.no. Description of item Unit Per Estimated
In figure Quantities
15 Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth 216.00 Cum 136.96
consolidating each disposited layer by ramming and watering.
Estimated amount put to tender Estimated amount put to tender
In words In words
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra
payment shall be made.
The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C
Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of
cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
All work shall be carried out as per P.W.D. Hand Book and other specification of the Division or as directed.
All the columns in the Schedule be filled in ink and the total of the entries in the last column should be struck by the contractor under his
Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all
conditions, site moisture, weather etc.
The contractor shall exhibit the details of work, tender amount, specifications as per Govt. circular No. BDG / 3277 / 1657 Dated. 26-4-1978
and G.R. No. TNC/ 1090-24 C, Dated. 18-11-91 as directed by the Engineer-in-charge on the work site for which contactor
In R.C.C. item where there is change of grade mix orchange as per actual mix design the difference of of cement consumption shall be added
/ deducted from rate of original item at the rate of star rate mentioned in the tender.
For earthquake resistance provision the works shall be carried cut as per the intruction of Engineer in charge.
The other conditions of Schedule "B" will remain unchanged.
Testing of materials shalll be as per statement atteched with the specification. The materials shall be tested in G.E.R.I. bill of testing charges
shall be paid the Executive Engineer and 1 % of the amount put to Tender shall be recovered from the contractor in running bills is as per
G.R. (R&B) Dept. No. TNC 1085 / (4) C Dt. 10-05-85.
Contractor shall even 'NIL' percentage. If deduction is offered.
Deputy Executive Engineer Executive Engineer
( R & B) Sub Division - I (R & B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Bank Credit CertI. as per clause 4.5.6 of SBD.pdf
GR.pdf
Performance Bond and Bitumen date.pdf
SBD BOOK CHADIYA LAPALIYA.pdf
SCH B.pdf
SPECIFICATION INDEX.pdf
SPECIFICATION.pdf
TEST SCH.pdf
TN No.20 of 2026-27.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .