G_F Extension of office Building and Supply of Furniture and AC With Fitting in Office of Regional Joint Director Agriculture Marketing Department Situated in Main Mandi Yard KUMS Jodhpur (Grain)

Amount

[1. Construction G/F Extension of office Building of Regional Joint Director Agriculture Marketing Department Situated in Main Mandi Yard KUMS Jodhpur (Grain).] Supply of Conference table size 18’length x 6’depth x 2.5’height. Made in pre laminated board. Table shall be made in 5 parts and will be fitted at site. Table 1,2,3,4 – All table size – 2400mm length x 600mm breath and 750mm height. Complete Top should be 34mm thick (Not only border) pre laminated board with border of 2mm thick PVC edge beading, modesty panels should of 525 width, exposed side to be edge banded with 0.8mm and Gable height from top should be 600mm Supports in between of table should be there so that it remains rigid. Table 5 – table size 1800mm length x 600mm width Complete Top should be 34mm thick (Not only border) pre laminated board with border of 2mm thick PVC edge beading. Edges of the table from both side should be round so that 3 persons can be seated properly. Supports in between of table should be there so that it remains rigid. All exposed side to be edge banded with 0.8mm. (Design and other specification as per direction of engineer in charge)

Supply of Executive Revolving Chair Heavy Duty steel finish base of 650mm with 60mm 5 wheels attached, class 3 gas lift, torsion bar plate mechanism, Single L ply 15mm attached with 40 density foaming in seat and back 100mm cushion in seat and 100mm cushion in back to be double cushioned. Upholstery material of leatherette. Handle should be attached in seat and back with cushion on it. Size of seat should be 500mm width and 475mm depth. Back size 750mm height and 500 width. (Design and other specification as per direction of engineer in charge)

Supply of Executive Table with Side unit Table size – 1800mm table top Length, 900mm table top breath, 750mm table height. 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded. All Modesty panel are of 750mm in width made in 18mm pre laminated board with 0.8mm edgbanded. Gable panel should be of 675mm Height from the top. Bottom of the table having footrest and on right side of the table having 3 equal drawers. All Drawer fitted on 400mm Telescopic Channel, having computer key locking systemon First drawer and rest without lock having steel handles. Side table of 900mm length x 450mm breath x 750mm height. Table top made of 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded having single drawer, keyboard, CPU and UPS stand at bottom. All exposed parts to be edge banded with 0.8mm. (Design and other specification as per direction of engineer in charge)

Supply of Office Iron Almirah - Almirah having 4 fix shelves make in 0.9mm Thick CRCA for shelf, top, bottom, back and doors complete. Size of the almirah shall be 78” x 36” x 19”. The locking and handle shall be Mazak handle with three way locking mechanism. The finish of the almirah should be of steel grey colour in Powder Coated with 50 microns. Almirah should be provided with balanced 2 foots at the bottom welded with almirah. (Design and other specification as per direction of engineer in charge)

Supply of Visitor Chair with arms in fix seating with full cushion on seat and back. Seat size 450mm width x 450mm depth. Backrest size 450mm width x 525mm height. Chair structure made in 16 gauge 1” round pipe with ¾” pipe duly inserted in 1” pipe for better durability. 2 Ms flats welding on iron frame of size 25mm width and 6mm thickness for seat. Backrest support structure having LMS flat of 50mm width and 10mm Thickness. Seat and back ply should be 12mm hot press. 75mm thickness 40 density foam in seat, 70mm thickness 40 density foam in backrest covered with matte fabric. Arms on the chair should of Ms covered with PU connected with bolts from bottom. Exposed parts of the iron structure to be powder coated with 50 micron. (Design and other specification as per direction of engineer in charge)

Supply of Operator table with file cabinet Table size – 1200mm table top Length, 750mm table top breath, 750mm table height. 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded. All Modesty panel are of 600mm in width made in 18mm pre laminated board with 0.8mm edgbanded. Gable panel should be of 675mm Height from the top. Footrest should be there in rest of the bottom part of table. Right side of the table having 1 drawer and 1 cupboard. Drawer fitted on 350mm Channel having computer key locking system. Cupboard fitted with auto hinges and having computer key locking system. Handles should be of steel both in drawer and cupboard. Drawer size 350mm Width x 375mm Depth. Side Table completely made on pre laminated board size 900mm length x 450mm width completely packed from 3 sides. Having 2 gates in front with steel handles and computer key lock Inside having complete single shelf. Top of the Side unit made in 25mm thickness table top made in post forming both end of table plain side to be 2mm edge banded. All exposed parts to be edge banded with 0.8mm. (Design and other specification as per direction of engineer in charge)

Supply of Executive Recliner Chair - Executive recliner boss chair having extra heavy base of 600mm with 60mm wheels attached, 80mm gas lift attached, torsion bar plate mechanism, structure of the chair should be made in complete wooden structure, fully upholstery of 125mm foaming in complete seat and back handles of wooden finish with cushion on them, in right handle there must be switch for reclining of backrest, reclining system must be there with small hydrolic below the chair, chair having premium leatherette finishing, chair seat size 550mm depth x 525mm width, backrest size 775mm height x 700mm width, arms size 300mm height x 75mm width x 475mm length. (Design and other specification as per direction of engineer in charge)

[2. Supply of Furniture and AC with fitting in office of Joint Director Agriculture Marketing Department Division Jodhpur.] Supply of Conference system at meeting hall on existing tables with delegate units, chairman unit, Control unit, mixer amplifier of same OEM with connecting cables of 2.5 mtr for delegate units,RJ45/Multi core connectors etc complete in all respect with making connections of speakers as per specifications below of makes: BOSCH/ STUDIOMASTER/SHURE/APART

CHAIRMAN UNIT

Type: Wired length of goose neck: minimum 450 mm Polar pattern: Bi-Directional Transducer type: Condenser Inbuilt Speaker: Required Frequency response: 400HZ- 10000 HZ LED indicator: Required ON/OFF switch: Required Volume Control: Required Audio connector type: XLR Priority Button : Required

DELEGATE UNIT

Type: Wired length of goose neck: minimum 450 mm Polar pattern: Bi-Directional Transducer type: Condenser Inbuilt Speaker: Required Frequency response: 400HZ- 10000 HZ LED indicator: Required ON/OFF switch: Required Volume Control: Required Audio connector type: XLR

CONTROL UNIT

CONTROLS: Can supply power upto 50 units Equalizer: 3 band (250Hz,5KHz,8KHz) Master Volume Control: Required LED indicator: Required USB interface : Required Outputs: PA output , recording output Volume control for Mic 1 input Volume control for Mic 2 / Aux input Headphone input and volume control Sliding switch for Equaliser On/Off Number of Active microphone control knob

MIXER AMPLIFIER UNIT

Output power Rating: 120W LED VU meter for master output: required master volume knob: required 4 volume knobs for microphone inputs: Required treble & bass control: Required

Supply & installation of XLR Extension cables for connecting controller unit to contributing units of length 10 mtr of same OEM as PA system

Installation charges for PA system units complete with all connecting speakers wire etc & testing & commissioning of system at site as reqd.

Supply & Installation of multimedia projector of brightness 3800 lumens or more, image brightness not less than 3800 ANSI lumens,Resolution 1280*800(WXGA) ,standard throw (0.91 to 2.5m) with 120 % optical zoom,Aspect ratio of 16:9 ,ultra high pressure mercury lamp/UHE/UHM source(minimum life of source 6000 hrs),HDMI ports,audio & video ports & all standard ports along with ceiling mounting kit having trolley base ,240 V ,50Hz supply operated complete in all respect of SONY/BENQ/EPSON/HITACHI Makes

Supply & installation of superior quality wall mount motorised screen of size 100 inches diagonal (152.4*203.2 cm),HD matte white fabric with anti UV coating,complete with suitable rating silent single phase electric motor,wired or wireless remote with batteries, wall mounted clamps etc as required to operate on 240V,50Hz power supply of approved make.

Supply & installation of 6 Watt ,wall mount ,one way speaker of polycarbonate enclosure with sturdy mesh,frequency response of 150-10000 Hz,,Nominal impedence 8 ohm, mounting bracket assembly of same OEM as PA system

Supply , installation ,testing & commissioning of wireless, hand held cardioid microphone unit having ,4 ohm impedence with LED indicator & on-off switch,battery operated(price of battery included) etc as required of Shure/Ahuja/Apart/Bosch or any approved make

PRAJAPAT CONSTRUCTION CO

LIFE STYLE INTERIORS

V.S. CONSTRUCTION

M/S GYAN SINGH PARIHAR

GOUTAM CONSTRUCTION CO.

PRAJAPAT CONSTRUCTION CO

V.S. CONSTRUCTION

M/S GYAN SINGH PARIHAR