Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
3 Jul 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
82
3 conditions
/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of t he R e v i s e d Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 10 of November 2017.
Item must be confirming to RDSO spec letter No. EL/7.1.108/SBC/Main dtd. 26/11/2024 & Annexure A
ALL the technical requirement strictly as per spec attached & approved Make Brand must be : FLIR-TG-268.269, BOSCH-GTC-400C, Fluke-PTI-120, Testo &TIPL Only
29 conditions
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.
MSE : a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Diretorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.
Risk purchase TIME LIMIT FOR MAKING RISK PURCHASE WILL BE 9 MONTHS INSTEAD OF 6 MONTHS.
Validity : Tenderers to quote minimum 90 days validity of offers.
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
ADVANCE ACCEPTANCE/COUNTER OFFER AND DELIVERY PERIOD: The delivery period in Store Procurement cases shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance/Letter of Acceptance.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Gujarat · 2 Numbers total
Hand held Thermal imaging camera
82265662A
82265662A
Open - Indigenous
Goods
Gujarat
₹0
Exempted
3 Jul 2026
18 Jun 2026
1 item · 2 Numbers total
Hand held Thermal imaging camera completewith 2 year warranty,technical requirement con firming to RDSOletter no.EL/7.1.108/SBC/Main dtd. 26/11/2024 and having IRresolution: 160 x 120 pixels, Di gital image enhancement:yes,Thermal sensitivity/NETD:less than 70 mK, Field of view (FOV):71 degree x 5 6 degree , Minimum focus distance: 0.3 m (0.98 ft),Distance to spot ratio: 24:1, Image frequency: 8.7 Hz,Fo cus:Fixed, Focal plane array/spectral range: Uncooled microbolometer/7.5 to 14 micro mtr., Detector pitch: 12 micro mtr,Display resolution: 320 x 240 pixels, Screen size: 2.4 inchportrait, Color palettes: Iron , Rainbo w, White hot, Black hot,Arctic, Lava, Image adjustment: Automatic, Image modes: MSX(Multi Spectral Dyna mic Imaging)Visual with temperaturereading, Object temperature range: -25 degree C to 380 degree C(-13 degree F to 716 degree F), Measurement accuracy: -25degree C to 50 degree C (-13 degree F to 122 degre e F): up toplus minus 3 degree C (plus minus 7 degree F) 50 to 100 degreeC (122 to 212 degree F): plus mi nus 1.5 degree C (plus minus 3degree F) or plus minus 1.5% whichever is greater 100 degree Cto 380 degr ee C (212 degree F to 716 degree F): plus minus 2.5degree C (plus minus 6 degree F) or plus minus 2.5% w hicheveris greater, IR temperature resolution: 0.1 degree C (0.2 degreeF), Repeatability of reading: plus mi nus 1% of reading or plusminus 1 degree C (2 degree F), whichever is greater, Responsetime: 150 ms, IR th ermometer measurement: Continuousscanning, Minimum measurement distance: 0.26 m (0.85 ft),Type-K r ange: Included Type-K probe: up to 260 degree C (500degree F), Type-K accuracy: plus minus (1.0% + 3 de gree C (7degree F)), Spotmeter: Center spot on/off, Set-up commands:Local adaptation of units, language, date, and time formatsScreen brightness (high, medium, low) Gallery, deletion ofimages, Emissivity correct ion: Yes: 4 preset levels with customadjustment of 0.1?0.99, Storage capacity on 4 GB card: 50,000images, Image file format: JPEG w/ spot temp data, Digitalcamera resolution: 2 MP (1600 x 1200 pixels), adapts to I R lens,Flashlight: 100 lumens LED, on/off option, Class 1 laser: Projectscenter spot and outlines circular me asurement area to indicatesize, Bluetooth: BLE, USB: Type-C: data transfer, power, Batterytype: Rechargea ble 3.7 V Li-ion battery, Battery operating time: 5hrs scanning, Battery charging time: 4 hrs, to 90%, Power management: Adjustable: off, 5 min, 15 min, 30 min,Shock/vibration: 25 g (IEC 60068-2-27); 2 g (IEC 60068 -2-6),Drop: Designed for 2 m (6.56 ft), Weight: 0.394 kg (13.9 oz),Size (L x W x H): 210 x 64 x 81 mm (8.3 x 2.5 x 3.2 in) Make Brand must be : FLIR-TG-268.269, BOSCH-GTC-400C, Fluke-PTI-120, Testo &TIPL Only [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSEE COACHING CARE CENTRE, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .