Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹90,383.15Accepted-AOC | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | REJI.S L1 |
|---|---|---|---|---|
| 1.00maintenace of Anganvadi building | ||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.33 | cum | 331.07 ₹109.58 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.33 | cum | 8,908.1 ₹2,948.58 Lowest |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 54.27 | kilogram | 112.9 ₹6,127.08 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 229.64 | kg | 188.2 ₹43,219 Lowest |
| 1.00 | OD342045/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.Details of cost for
216.14 sqm (External dimension of plinth). Area of roof = 20.2x10.70 m =
216.14 sqm | 50.22 | sqm | 649.69 ₹32,627.43 Lowest |
| 1.01 | OD345636/2024-2025:Supplying and fixing 150mm dia rainwater gutter semicircular section including 32x5mm MS flat support 1M intervals etc complete | 8.7 | metre | 494.46 ₹4,301.8 Lowest |
| 1.01 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 4 | metre | 262.42 ₹1,049.68 Lowest |
Tender Value
₹84,629
EMD Value
₹2,116
Closing Date
3 Mar 2025, 10:00 amClosed
Assistant Engineer
VALLIKUNNAM GP
RETENDERVallikunnam GP PNO 79 Annual Plan- Anganwadi number 138 Maintenance
2025_LSGD_731641_2
10/AE/LIDEW/VKM/25
Open Tender
Civil Works - Buildings
Item Rate
180 days
VALLIKUNNAM GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹2,116
Yes
10 Nov 2025
24 Feb 2025
4 Mar 2025
24 Feb 2025
3 Mar 2025
24 Feb 2025
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1194981.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .