New Gujarat Pattern 2023-24 Resurfacing of Sakarpatal Internal Road Tal. Waghai. Dist. Dang

Name of work: New Gujarat Pattern 2023-24

Resurfacing of Sakarpatal Internal Road Tal. Waghai. Dist. Dang

Memorandum showing items of works to be carried out

It. Quantities Item of work Estimate Unit Total Amount

It. Quantities Item of work Estimate Unit Total Amount

No. estimated but In figures according to

may be more or Rs. Ps. estimated

1 0.22 Hect. Clearing and grubbing road land including 34889.38 Hect.

uprooting rank vegetation, grass bushes, shrubs,

saplings and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of

unserviceable materials.(D) By mechanical

means in area of thorny jungle.

2 1500.00 Sq.mt. Scarifying gravelled macadam or bitumen 43.77 Sq.mt.

macadam surface 6 cm to 10 cm.depth including

stacking useful materials on road side and

disposing off remaining stuff.

3 726.00 Cu.mt. Earth work in cutting in all coats of soil and soft 112.02 Cu.mt.

murrum including conveying and putting the

stuff in spoil bank maintaining minimum

distance of five meter between top edge of

cutting and top of spoil bank.

4 45.00 Rmt Supplying and fixing reinforced concrete heavy 1968.38 Rmt

duty non-pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of

class NP3 of following internal daimeters.(iii)

5 132.00 Cu.mt. Supplying, Stacking and Spreading the Hard 849.61 Cu.mt.

Murrum including rolling and watering etc.

6 269.00 Cu.mt. Providing and laying 150mm thick W.B.M of 1676.80 Cu.mt.

Grading-II in two layer each of 75mm using

B.T.M.C. metal of size 45mm to 63mm in layers

including 13% sone screening 13.2mm size and

7% stone dust as filler, including spreading,

watering and cosolidation by vibratory roller as

per MoRTH specifications etc complete as

directed by engineer in charge.

7 255.80 M.Ton Providing and laying bituminous base course 2409.24 M.Ton

37.5mm thick compacted in one layer with tack

coat of asphalt Emulsion RS-1 at the rate of

Kg / 10 Sqmt. and using B.T. stone aggregate or

required gradation and asphalt (VG-30) grade

for mixing @ 1.99 % by weight of total mix for

mixing including heating the aggregate and

asphalt by drum mix plant and spreading the

same by paver finisher and consolidation with

vibratory roller including providing all meterials,

equipments, tools and plants, oil, kerosene, fire

wood, labour chrges etc. complete.

8 179.10 M.Ton Providing laying & rolling of 25 mm thick 3054.29 M.Ton

Open graded Premix bituminous carpet with

B.T. aggregate as specified and using RS1

Emulsion for tack coat at the rate of 2.5 kg/10

sq.mt. and using bitumen grade VG-30 for

Mixing with aggregate at the rate of 3.36 % i.e.

33.60 kg / M.T. of total mix including heating

and mixing in drum mix plant transporting and

spreading the same with paver finisher and

consolidation with vibratory roller including

necessary fire wood , oil , lubricant , labour

charges etc. using contractor's own drum mix

plant and equipment ,tool etc .complete in

accordance with the requirement of

9 92.10 M.Ton Providing and laying seal coat with B.T. 3341.42 M.Ton

aggregate as specified using aggregate at the rate

of 0.18 Cu.mt./10 Sq. mt. and bitumen grade

VG-30 for mixing with aggregate at the rate of

4.5 % i.e. 45.00 Kg. / M.T. of total mix including

heating and mixing in drum mix plant and

transporting and spreading the same by paver

finisher and consolidation with vibratory roller

including necessary fire wood , oil , lubricant

labour charges using contractor's own drum mix

plant, machineries and equipment tools etc.

complete in accordance with the requirement of

10 3410.00 Sq.mt. Providing and laying asphalt painting on B.T. 33.91 Sq.mt.

surface with bitumen VG-30 at rate 5.00Kg /

10Sq.mt. including spreading stone dust for

painting surface at rate of 0.03 cu.mt. / 10 sq.mt.

11 2.00 No. Providing and fixing ordinary kilometer stone of 704.33 No.

precast C.C. 1:2:4 including necessary

reinforcement as per I.R.C. type design in C.C.

1:4:8 including lettering and painting etc.

complete. (For OD.R. & V.R.)

12 5.00 No. Providing and fixing Hectometer stone as per 356.50 No.

I.R.C. type design including lettering and

painting etc. complete. (ii) Fixing in C.C. 1:5:10

13 1.00 No. Informatory sings: Providing and fixing sing 3856.90 No.

boards made out of 2mm aluminium sheet; size

80 x 60cms. rectangle as per the design of IRC-

67-1977 pre treated with phospheting process &

acid teching; coated with one coat of

epoxyprimer and two coats of best qualityepoxy

paint; reflectorised with retro refiective sheeting

as per latest M.O.S.T. Specifications; 3.1m long

stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy

coatings in black and whitebends. the details of

symbol for eachboard shall details of symbol for

eachboard shall be as per the instruction

ofengineer in charge. The fixing at site shall be

in 1:2:4 CC block of size 45 x45 x 60cms. for

each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)..

14 1.00 No. Logo Board:- Providing and fixing Logo Board 4545.00 No.

made out of 2mm aluminium sheet, as per the

drawing & design. Pre treated with phospheting

process and acid etching coated with one coat of

epoxy primer and two coat of best quality epoxy

paint, refloctrorized with retro reflective

sheeting as per the latest M.O.S.T. specification,

3.1 Mt. long stand post and frame fabricated

from suitable size iron angle of 35 x 35 x 3 mm,

75 x 75 x 6 mm as required painted with best

quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as

per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size

45 x 45 x 60 cms for each leg, including

excavation curing etc. complete under the

supervision of Engineer-In-Charge

(A)Engineering grade.

15 1.00 No. Village name/ Bump Ahed sign :-Providing and 5045.36 No.

fixing sing boards made out of 2mm aluminium

sheet; size 90 x 60cms. rectangle as as per the

design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be

as per IRC-30-1968, 3.1m long (2 nos) stand

post and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm painted with best quality

epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for

each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each

leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

16 75.00 Sq.mt. Road marking with hot applied thermoplastic 367.72 Sq.mt.

paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excludingof surface

applied glass beds as per IRC:35- 2015. The

finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white

color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service lifeduring the day

time. The marking should meet the performance

criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015. Warranty for the

Retro reflectivity should be two years.

17 83.00 No Cat Eye / Road Stud / RPM: Supplying of 217.40 No

Molded Twin Shanks Raised Pavement Markers

made of polycarbonate and ABS moulded body

and reflective panels with micro prismatic lens

capable of providing total internal reflection of

the light entering the lens face and shall support

a load of 13635 kgs. tested in accordance to

ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 DO III Dt

11.06. 1997. The height, width and length shall

not exceed 20mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on

each side and the slope to the base shall be 35 +/-

5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not

less than 19 +/- 2 mm and height not less than

30+/- 2 mm) from the body is to be a minimum

value of 500 Kgf. Fixing will be by drilling holes

on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as

per manufacturers recommendation and The

color of the marker should be as per

18 2.00 Nos Cautionary Warning sign :- Providing and fixing 3808.66 Nos

Cautionary Sign Board made out of 2mm

aluminium sheet, size 90 x 90 x 90 cms

equilateral triangle, as per the design of IRC-67-

1977. Pre treated with phospheting process and

acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint,

refloctrorized with retro reflective sheeting as

per the latest M.O.S.T. specification, 3.1 Mt.

long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3 mm, 75 x

75 x 6 mm; painted with best quality epoxy

coating in black and white bends. The details of

symbol for each board shall be as per the

instruction of engineer in charge.The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60 cms for each leg, including excavation curing

etc. complete under the supervision of Engineer-

In-Charge (A) Engineering grade.

19 8.00 Nos Regulatory/Mandatory signs :Providing and 3439.81 Nos

fixing sing boards made out of 2mm aluminium

sheet; size 60cms. diameter circle as per the

design of IRC-67-1977 pre treated with

phospheting process & acid eteching; coated

with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x

35 x 3mm 75x75x6mm as required; painted with

best quality epoxy coatings in black and white

bends. the details of symbol for each board shall

be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the

supervision of engineer in charge.(A)

Engineering grade.

20 2.00 Nos STOP SIGN:-Providing and fixing sing boards 4676.06 Nos

made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process &

acid teching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per

latest M.O.S.T. Specifications; 3.1m long stand

post and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy

coatings in black and white bends. the details of

symbol for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing

tec. complete under the supervision of engineer

in charge.(A) Engineering grade.

Rs. Twenty Four Lack Ninty Nine Thousand Eight Hundred Seventy Six and Paise Thirty Six Only.

I/We am/are willing to carry out the work at ________________ % above/below ( percent should

be written in figures and in words ) of the estimated rates mentioned above. Amount of my/our tender works

*Estimated amount *Estimated amount

put to tender Rs. _____________ put to tender Rs. _______________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:- The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

Note 2 :- The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Bidder Executive Engineer

Panchayat (R&B) Division