CONSTRUCTION OF HAND WASH STATION AND REPAIR OF TOILET AT MUKUNDWADI MUNICIPAL SCHOOL AT ZONE NO. 06 UNDER THE HINDU HRIDAY SAMRAT BALASAHEB THAKREY URBAN PUBLIC WELFARE FUND.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering, including shoring and strutting, etc., complete. (Lift up to 0.00 to 1.50 m.) By Manual Means.

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) SSR  Item No.21.10 Page No.115

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) SSR  Item No.21.14 Page No.116

Conveying materials ( Murrum, Building Rubish, Earth) for a lead of over 7 Kms. inclusive from the site of excavation to the site of deposition as directed.

Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader/paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 – Plant Mix Method and Grading-II Material.

Providing and fixing factory made Hydraulically Pressed Mechanically Vibrated and Compacted Precast Interlocking Cement Concrete Paving Blocks 80 mm thick in M-40 grade of approved size and shape for city streets, small/medium market roads, low volume roads, utility cuts on arterial roads, etc., as specified and as per IS 15658:2006, including cost of all materials, manufacturing, curing, transportation of blocks to work site, loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/crushed sand of 50 mm thickness, including necessary excavation in all strata, spreading blinding of fine sand over the prepared bed, compacting blocks by plate vibrator, etc., complete.

Providing and laying cast in situ/Ready Mix Cement Concrete in M-10 grade using trap/granite/quartzite/gneiss metal for foundation and bedding, including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening where special finish is to be provided, finishing if required, and curing complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible drum type mixer/concrete batch mix plant (pan mixer), etc., complete. With fine aggregate (crushed sand, VSI Grade).

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete.

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailin out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR  Item No 25.11 Page No.133

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR  Item No 25.31 Page No.134