Setting up of Geo Chemistry sample processing lab at ground floor of SEESS building in IISER campus, Vithura

Dismantling tile/kota stone work in flooring/ dado laid in cement mortar including removal of back mortar, stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Cement Plaster (IN FINE SAND) 1:6 (1 cement: 6 fine sand)(chicken mesh have to be usd in the joints as per the direction of EIC

Size of Tile 800x800 mm

LVT flooring Supply and laying of LVT flooring 5 mm thickness with 0.50 wear layer (luxury vinyl flooring of approved design and pattern, as per the architect's approval and instruction). Type of flooring: Vinyl synthetic floor covering, heterogeneous with EPT Sheild (Anti Bacterial and anti fungal), SGBP Certified. Overall thickness:- EN ISO 24346: 5.0 mm. Thickness of the wear layer: ISO 24340: 0.50-0.55 mm. Abrasion group: EN 660-2, Class T. Binder content wear layer: EN ISO 10582 typer I (HPD certified). Level of use: EN ISO 10874 class 23/33/42. Dimensional stability: ISO 23999<0.10% and cooling after exposure to heat <1.0 mm. Safety criteria: Fire resistance EN 13501-I Bfl-s1 (Class A), Slip resistance: EN 13893 (DS), DIN 51130-R 10 light fastness: ISO 105-B02>6 performance impact sound reduction: EN ISO 10140-3 (9 dB), resistance to chemicals: ISO 26987 (no damage) Warm water: under floor heating suitable max. 27 °C static load limit: ASTM F970 <0.005 in @ 250 psi min Formaldehyde Group: EN 717-1 (Ei0 VOC emissions: IAC Gold Certified very low Volatile Organic Compounds (VOC) of approved quality complete as per the suggestions from the architect/engineer in charge. Approved make: Merino, Shaw Flooring, COREtec.

ROLLER BLINDS Supply and installation of moisture-resistant roller blinds (including the pelmets) of approved shade of weight 330 g/sq. m. ±5%; 100 % Blackout Polyester material should be used, Extrication Formaldehyde amount less than 30 ppm. Fabrics type should be Blackout make of 100% Polyster with Blackout Rate 100%, fabric thickness 0.45 mm (± 0.05), light fastness 4 Grade, excellent hanging propeties, very high tearing strength, with Acryilc coating resistant to cracking and fraying, conditionally cleanable with damp cloth. Approved shade of roller blinds should be decided as per the design confirmed by the consultant/customer and engineer-in-charge. Approved brands: Vista, NI, MAC, HunterDouglas.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings,stopper etc, all complete as per direction of Engineer in charge (Door handle, lock and . to be paid separately)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. subframe material will be supplied by the department,remaining materials has to be arranged by contractor (Glazing, paid for separately)