Construction and Development of Garden along with Erection of Statue of Hon. Balasahab Thackeray as His Memorial in Aurangabad City

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Excavation of foundation in earth,soils of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50 meters beyond the building area and stacking the spreading as Directed,dewatering,preparing the bed for the foundation and necessary back filling,ramming watering including shoring and shuttering etc. complete.(Lift upto 1.5 m.)

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.

Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete.

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and fixing 50mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete. (Material obtained from departmental Land)

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - Plant Mix Method and Grading - II Material

Excavation of foundation in earth,soils of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50 meters beyond the building area and stacking the spreading as Directed,dewatering,preparing the bed for the foundation and necessary back filling,ramming watering including shoring and shuttering etc. complete.(Lift upto 1.5 m.)

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

.Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) UPTO 3.8 M HEIGHT

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand UPTO 3.8 M HEIGHT

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand UPTO 3.8 M HEIGHT

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand UPTO 3.8 M HEIGHT

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete UPTO 3.8 M HEIGHT

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete. UPTO 3.8 M HEIGHT

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. UPTO 3.8 M HEIGHT

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. UPTO 3.8 M HEIGHT

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles (50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundation, fixing post in cement concrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing wire fencing with iron/ C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete.

Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. UPTO 3.8 M HEIGHT

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Excavation of foundation in earth,soils of all types,sand,gravel and soft murum, including removing the excavated material upto a distance of 50 meters beyond the building area and stacking the spreading as Directed,dewatering,preparing the bed for the foundation and necessary back filling,ramming watering including shoring and shuttering etc. complete.(Lift upto 1.5 m.)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

STEEL STRUCTURE-Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

STONE AGGREGATE- Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base -- By Mixing Plant Method for 45 mm maximum size

Excavation of foundation in earth,soils of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50 meters beyond the building area and stacking the spreading as Directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming watering including shoring and shuttering etc. complete. (Lift upto 1.5 m.)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete for Vinyl film work.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing & Fixing in position, Partition made from 12mm thick Gypsum from both sides on 50 x 50 mm Sal-wood frame of 600 x 600 c to c, having of 800 gsm synthetic wool 50 mm thick in between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete

Providing and fixing wall Panelling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the requisite manufacture viz Anchore / Century / Kenwood /Duro / jet or equivalent generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge.

Providing and fixing Country cut teak wood single leaf door shutter with teak wood style and rail of 25 mm thick including fixing 50 mm x 25 mm size welded mesh of 10 gauge as per detailed drawing or as directed with stainless steel fixture and fastening finishing with 3 coats of oil painting etc. complete.

Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material V2 / V4 as directed by Engineer in charge.

Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi-chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi-chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. complete.

Providing & Arrangemnt of High Back chair, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery.

Book Case with Glass Shutter @ 825Lx300Dx1650HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing.

Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color.

Providing and fixing of fire exit door of size - 3000mm x 2500mm one side openable with hinges, long click handles as per approved design a) Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 mm with 45mm thick two layered 3mm Lead Line Sheets with 10mm overlap from either side & spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge

b) Shutter: Providing of 57mm thick asbestos free composite, 'TUFWUD' brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 mm with 30mm thick infill of ceramic fibre (density 128 Kgs/CMT) vermiculite mix, 3mm thick Lead Sheet on one side faced & 3mm Fire retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping.

Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge.

Floor Directories Providing and fixing acrylic multilingual Braille (raised dots)ADA compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor plan and the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letters of height 20mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each directory to be fixed as per manufacturers specifications on the wall at the approved location at a height of 1200mm from FFL and as per the directions by the engineer in charge.

ADA compliant modular Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4" in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer

Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system

Horticulture - Maintenance of Plants / Shrubs, landscaping including grass cutting, removal of branches / undesirable vegetation, removal of debris and weeds, replacement of death plants, supplying and spreading farm yard manure, trimming, providing and spreading insecticides/pesticides - in Landscaped Area as well as Undeveloped Landscape Area.

Electrical Maintenance - Including general cleaning, repairs of lighting, high mast lighting, lighting outside and inside the buildings, Air Conditioners, fans, LT and HT panels, DG sets, junction boards, distribution boards, existing surveillance and security systems, etc. Work shall include replacement of bulbs, light fixtures and any other materials, attending to electrical faults etc. (Material Costs and AMCs to be reimbursed by the client on actual basis).

Preparing Lawn (20cms. Depth) Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20 cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering , weeding , clipping, rolling, etc. complete.

Preparing Shrubbery:- Excavating the ground to a required depth of 30cms., removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting well developed shrubs plants, 0.50 mtr. height, 0.45 mtrs. apart as directed and maintaining till well established by watering, weeding, stirring replacing of casualties etc, complete.

Planting large flowering/ shady trees :- (Minimum Height to 1.5 to 2.0 Mtr.) - Digging pit with size 0.9m X 0.9m X0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m. and remaining height of 0.60m. with fresh garden soil and manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering previous night, planting one to two year old, minimum 1.0 mtr height, healthy tree sapling as per specifications. Maintaining till well established by wateringm weeding, stirring, of soil, staking, replacing of casulaties etc. complete.

Replant of trees within radius of 5km (Girth-30-60 cm)

Replant of trees within radius of 5km (Girth-60-90 cm)

Replant of trees within radius of 5km (Girth-90-120 cm)

Replant of trees within radius of 5km (Girth-120 & above cm)

Providing and laying cast iron pipes of B class of 80mm diameter with sockets and spigot ends/ flanges and cast centrifugally / vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and laying cast iron pipes of B class of 100mm diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and laying cast iron pipes of B class of 150mm diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and making lead joints for 80mm diameter cast iron pipe line including lead and testing.

Providing and making lead joints for 100mm diameter cast iron pipes line including lead and testing.

Providing and making lead joints for 150mm diameter cast iron pipes line including lead and testing.

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing white glazed urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete."

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Providing and fixing C.P. Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

Extra for depth for manholes : Size 90x80 cm -With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

Extra for depth for manholes:Size 60 x 90 cm

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing MS grating & fixed frame to brick/concrete of angle 25mm x 25mm x 4mm with 1 no. hold fast of size 10mm x 6mm on one face. The removable cover shall be made with outer frame of MS angle 25mm x 25mm x 4mm having welded cross members on each direction with MS flats of size 25mm x 4mm at a spacing of 25 mm C/C. including two coats of synthetic enamel paint over a coat of primer complete as required. Complete with MS frame and cover with grating. (For drainage channel) Size 350mm x 600 mm

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover,PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Supplying, erecting & terminating XLPE armoured cable 3 core 4sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying and installation following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joint with horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders etc. as required. 150mm width x 50mm depth x 1.6 mm thickness.

Supplying and erecting ISI mark GI pipe 50 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 65 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 75/80 mm dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 100 mm dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 65 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.65mm dia

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.100mm dia

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Fire Fighting Supplying, installing, testing and commissioning with perfect aligning, proper levelling and booster pump of 900 LPM at 40m head, 12.5 HP (10 kw), 3 phase, 415 volt, 50 Hz or of suitable HP with suitable stages as per specification No.FF-MFP/BP

Supplying and installing air vessel of 300mm dia 1.5 mtr in height MS tank installed inside pump house / on terrace complete as per specification No. FF-FFA/ACT

Supplying, erecting & terminating XLPE armoured cable 3 core 4sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/ PG

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per Specification no. FF-VL/BFV

Supplying and erecting cast iron double flange ball type NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange ball type NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/ PG

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/ PG

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 2 x 2.5 sq. Mm

Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per Specification no. FF-VL/BFV

Supplying and erecting cast iron double flange ball type NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting ISI mark GI pipe 32mm. Dia "C" class at position with accessories complete. Specification No.CW-PLB/GP

Supplying and erecting ISI mark GI pipe 40mm. Dia "C" class at position with accessories complete. Specification No.CW-PLB/GP

Supplying, installing, testing and commissioning of 2 zones micro processor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification No.FF-FAAS/FACP

Supplying, installing, testing and commissioning of 15mm (1/2") dia. NBCM body chrome finished quartzoid bulb sprinkler having 68 degree celcius fixed temperature rating with deflector disc of conventional construction complete as per specification No.FF-SPR

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Providing and fixing at work site, Dark grey/Black color Basalt sandblast leather finish stone slab flooring 35mm thick in required position on cement mortar 1:4 including filling joints with cement slurry, curing, cleaning and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by engineer in charge etc.

Providing and fixing at work site, Dark grey/Black color Basalt Cobble Stone with Sandblast Leather Finish of Size 100x100x100 mm for Flooring with tolerance not exceeding 10mm & having density of 2800-3000 kg/cum, Including Sand bed 30 mm thick & 1:4 C.M. cement mortar for filling joints ,pointing with cement over joints Curing cleaning complete in all respect and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by Engineer In charge etc.

Providing and fixing Glazing all outer section 100x50x2mm duly PP powder coating 55 micron and intermediator section in 50x50x2mm duly PP powder coating 55 micron with Insulated glass frame section for holding glass of 6mm + 12mm air gap + 6mm with fixing at site

Providing and fixing at work site, Gwalior Stone block in cement mortar 1:4 in superstructure including clamping with the MS structure and raking out joints when plastering is to be done and striking joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding complete in all respect as per provided drawing/design and directed by Engineer In charge.

Providing and fixing at work site, Gwalior Stone slab vertical dry cladding 35mm thick in required position on MS Clamps including, cement float, filling joints with cement slurry, curing, cleaning and complete and loading, unloading, transportation and including all other taxes and excluding GST complete in all respect as per provided drawing/design and directed by Engineer In charge.

Providing and fixing at work site, Gwalior Stone vertical dry cladding 35mm thick in required position on MS Clamps including, cement float, filling joints with cement slurry, curing, cleaning and complete and loading, unloading, transportation and including all other taxes and excluding GST complete in all respect as per provided drawing/design and directed by Engineer In charge.

Providing and fixing at work site, Dark grey/Black color Basalt sandblast leather finish stone slab flooring 35mm thick in required position on cement mortar 1:4 including filling joints with cement slurry, curing, cleaning and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by engineer in charge etc.

Providing and fixing at work site, Dark grey/Black color Basalt sandblast leather finish stone slab flooring 35mm thick in required position on cement mortar 1:4 including filling joints with cement slurry, curing, cleaning and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by engineer in charge etc.

Providing and fixing at work site, Dark grey/Black color Basalt sandblast leather finish stone slab (600X600) vertical dry cladding 35mm thick in required position on MS Clamps including, cement float, filling joints with cement slurry, curing, cleaning and complete and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by Engineer In charge.

Providing and fixing 3.0mm thick S.S garbage cans out of 304 QCR SS as per detailed drawings including moulding to specific shape, rounding of corners, and edges, lids to cover the garbage can, polythene bags to collect garbage polishing, cleaning, painting with approved quality and color oil painting fixing in position, transportation as directed by Engineer-in-charge etc. Complete

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge

Providing and fixing of glass fibre reinforced concrete (G.R.C) flooring tiles in sizes of 110mm X 110mm. The thickness of the tiles should be between 40mm to 60mm. The tiles should be made with M-40 Grade concrete mix design having ‘43’ grade white Portland cement, reinforced with Alkali Resistant glass fibre and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments with high vibration technology. The pigmentation should be homogeneous. The Tiles should be fixed on cement mortar 1:3 (1 Cement: 3 Coarse sand) of 20mm thick and filling of grooves with white cement or any other suitable grouting material matching shade of tile as per site in charge.

Providing and fixing Porcelian Mosaic tiles 50 mm x 50 mm of minimum thickness 6 mm for various tiles.water obseravation :< 0.3%, breaking strength : 60 mm , Dimension tolerance +- 5% , thermal shock : resistance , chemical resistance , sheet size : 306 mm x 306 mm To be fixed over 3 to 4mm bed of polymer adhesive as per IS :15477 to correct line, level and plan with 3 mm joint between the tile (method in application will be guided by manufactures specifications) and epoxy grouted with readymade polymer grout complete.

Corten steel wall of size 3.0mx3.0mx0.6m in which printed ceramic panel installed to showcase famous caricature or images of Bala sahab famous work- Providing and fixing 5 mm thick corten steel on existing ms structure with waterjet/laser/plasma cutting,supported with ms tubular section and base plate and fastened with hilti fastener and structurally approved, with required foundation work as per approved structure design.

Corten steel Car Sculpture -Providing and fixing 5 mm thick corten steel fixing on existing ms structure with waterjet/laser/ plasma cutting, supported with ms tubular section and base plate and fastened with hilti fastener and structurally approved, with required foundation work as per approved structure design.

Ceramic printed panel-Providing & fixing of printed ceramic panel (600x600) & (600x300) vertical dry cladding 20 mm thick is required position on ms clamp and complete and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by Engineer In charge.

STEEL SCULPTURE-Providing & fixing of cast iron sculpture of 6MX5.2M installed on the raised rcc pedestal sculpture depicts scale model of shivaji park in which Balasaheb addressed 4 lakh people.

Providing and fixing 5 mm thick corten steel fixing on existing ms structure with waterjet /laser/plasma cutting,supported with ms tubular section and base plate and fastened with hilti fastener and structurally approved, with required foundation work as per approved structure design.

Providing and fixing at work site, Dark grey/Black color Basalt sandblast leather finish stone slab (600X600) vertical dry cladding 35mm thick in required position on MS Clamps including, cement float, filling joints with cement slurry, curing, cleaning and complete and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by Engineer In charge.

Providing & Laying approved shade of stain resistant Carpet Tiles/flooring/ on wall upto 3000mm of 4-5 mm thickness with waterproof backing , installed as per detail drawings and as per company specifications with the Engineer in charge. Make :(Gerflor/CCIL/Flotex/Forbo or equivalent)

Providing & Laying approved shade of stain resistant Metal Carpet Tiles/flooring of 4-5 mm thickness with waterproof backing , installed as per detail drawings and as per company specifications with the museum design consultant Make :(Gerflor/CCIL/Flotex/Forbo or equivalent) as approved by museum design consultant.

Foam Backing Vinyl flooring with anti skid, excellent sound insulation, shock absorbent,ease of maintenance with sub levelling compound of gray colour with thickness of 3 - 3.25 mm as per company specifications with the Engineer in charge . Make:(Armstrong,Forbo,Gerflor or equivalent)

Providing and fixing of Graphic Vinyl film on the designed location as per approved design and as directed by Engineer - in - charge.

Supply of design bench made of wooden sliced pieces. Size of bench 1.8mx 0.75m in rectangular shape and assembled in stainless steel pipe as per approved design and Engineer - in - charge.

Rectangular reception table with 12 mm thick corian/ 12 mm thick clear glass top of total 1200 mm height ,with 5900 mm length & 800 mm width, made of high density board and 12 mm corian pasted over with drawer and storage space below the counteras per approved design and Engineer - in - charge.

Design, development and installation of shadow sculpture from BalaSahab used object replicas like(Painting brush,pen,rudraskh mala, spectacles etc.)which is suspended from ceiling top with metallic chain fixed with designed ms structure.3 gobolight installed at 3 facades will creates 3 different shadowsfrom single sculpture(balasahab face profile,maharastra map,shiv sena symblic tiger).

Supply and installation of Augmented Reality including Software & Hardware components, installation, testing, commissioning of the complete product & integration of the content with warranty. The AR intends to allow visitors with an induced experience of meeting, interacting and being photographed with the Bala Sahab achievable with the aid of Augmented Reality. Creation of virtual interface using graphics, animations or videos of Bala Sahab to meet and greet the visitors in the real environment, allow visitors to interact and visualize themselves in the augmented display, as they are greeted. The rendition of the Bala Sahab in life scale, coming close to reality, is of essence. The content generated of the moment should be stored temporarily and provisioned to be reproduced as photograph or sent as email. Requisite printing and e-mail facility is necessary. Inclusive of 2000-5000 lumens short throw projector, Required Media server, HD camera with sensor based system.

Providing and fixing of early life timeline wall installation of size 14000mm x 3000mm to explain early life, personal, career, social of Balashaheb Thackrey made out of Graphic printed glass panels over wooden panelling with 50 % area backlit as per approved design and Engineer in Charge.

Supply and fixing of documentary screen of 5mt on the wall with projection and audio system , which includes 1 projectors(5000 lumen make hitachi/epsom/or equivalent ) and required Audio System per the specifications and as approved by the Engineer in charge Make :(JBL,bosch or equivalent) with complete intergration.

Providing and fixing of map of maharastra table with MS base framework of size 2.4m X 2.4m with printed glass backlit and glass print map to showcase the formation of maharashtra and associated movemnets/objects etc

Providing and fixing of TV installation with of size 32", 5 in number with Vision glass panelling Showcasing Balashaheb caricature work, his ideology and concept behind through TV and armoured headphone,as per approved design.

Providing and fixing of cricket pitch story installation, with 8 self standing glass panels of size 2.1mmX0.9mX0.012m with printed /vinyl film , to showcase shiv sena period as per approved design

Providing and fixing of 5 Glass/ acrylic circular shape backlit boxes with printed vinyl fixed on ms powder coated tubular pole as per approved design

Providing and fixing a table 2400mmx 2400mm x 750mm enclosed with corian box and glass casing with 5 replicas of size 300mm x 300m x 300mm of his belongings as per the specifications and drg as approved by the Engineer in charge .

Providing research, content writing, copywriting, proof reading for over all content, procurment of images from various photographers and various resources

Providing artefact procurement/ replicas 20 in number of Balasaheb's Thackrey's belongings

Providing the archival images,audio and video from various resources editing, content proof reading,narration(regular voice artist),sound design.

Designing of artworks/ graphics/ illustrations

Designing and developing the orientation film/documentary of 3-4 duration on Balashaheb life which includes compiled pictures with audio narration(regular artist )

Designing and developing of 5 videos of 2 mins involving 5 audio speeches on Balashaheb thackrey caricature, defining caricature agenda , meaning and perspective including intergration with the hardware,testing and comissioning.

Providing and fixing ball (brass) valve of approved quality. High or low pressure, with plastic floats complete: 32 mm nominal bore.

50 mm nominal bore.

Providing and fixing C.I. light duty Manhole Cover with frame size 450x600mm rectangular total weight 38 kg. (23 kg. cover and 15 kg) complete in all respects. (For overhead tanks)

Providing and fixing C.I. medium duty circular Manhole Cover with frame size 560 mm dia, total weight 128 kg (64kg frame & 64 kg frame) complete in all respects. (For underground tanks)

Providing and fixing lever operated gun metal ball valve with SS ball. 20mm nominal bore

25mm nominal bore

32mm nominal bore

40mm nominal bore

50mm nominal bore

65mm nominal bore

Providing and fixing class-O Careflex ST insulation 6mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. 16mm nominal bore (6 mm thick insulation)

22mm nominal bore (6 mm thick insulation)

Providing, laying and testing CPVC Pipes of an approved make complete with CPVC fittings such as tees, crosses, plugs, sockets, elbows, reducers, unions, sleeve pieces, check nuts etc. jointed with solvent cement compound including necessary excavation and back filling etc. all complete. (pipes burried in ground). 32 mm NB (34.90mm OD) (SDR-11 ASTM D-2846)

50 mm NB (54.00mm OD) (SDR-11 ASTM D-2846)

65 mm NB (54.00mm OD) (SDR-11 ASTM D-2846)

Complete Item Rate for Providing and fixing 600mm long Puddle Flanges fabricated out of 6mm thick M.S. plates along with flanges of suitable size properly fixed in walls and top slabs of underground and overhead tanks. The rate includes all taxes, handling, rehandling, lead lift, loading, unloading T&P, Labour Charges etc. 25mm dia

32mm dia

40mm dia

50mm dia

65mm dia

80mm dia

100mm dia

150mm dia

200mm dia

250mm dia

Providing and fixing 100mm dia G.I. vent pipe on Under ground and over head tank inlcuding cost of 2 Nos. 900 bend and painting with enamel paint complete with in all respect.

Supply, fixing, testing and commissioning of Air Release Valves screwed ends with ball valve of approved brand of manufacture, with accessories etc., complete. 15mm dia

Providing, laying & jointing in position of uPVC pipes (I.S.:4985-1981) of 6 kg/cm2 rating with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). (For Irrigation lines). 90mm OD- 6 kg/cm²

50mm OD- 6 kg/cm²

40mm OD- 6 kg/cm²

32mm OD- 8 kg/cm²

25mm OD- 8 kg/cm²

Providing and fixing vitreous China Sanitary fixturs and CP fitting and other accessaries for Handicapped toilet Hindware Cat no. 70002 (Matrix Set-1) or equivalent make CERA Cat. no. CRANE. Each Matrix Set shall comprised (Wash Basin 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm). complete all respect.

Providing and fixing CP brass Sink Mixer, mixing fittings (JAQUAR Cat. No. CON-CHR-309KN or approved equivalent.

Providing and fixing 15mm C.P. brass Connection Pipe Jaquar Cat No. ALD-805B (450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for WC, Geysers & Basin Mixers) or equivalent make union nuts complete with C.P. brass flange including cutting and making good the walls wherever required. (with Angular stop clock)

Providing and fixing C.P. brass twin robe hooks, JAQUAR Cat. No. 1161 or equivalent make.

Providing and fixing S.S. hinged grating, 1.5mm thick with frame JAYNA NEW HEAVY GRATINGS Cat. No. NHG 140 including setting in floor with cement mortar 1:3.

Providing and fixing, Soap Dispenser with Metallic Bottle with push lever assembly complete with soap refill - (JAQUAR Cat No. ACN-1137N) Make or approved equivalent.

Providing and fixing stainless steel Toilet Paper Holder JAQUAR Cat. No. ACN-1153S or equivalent make fixed in position by means of C.P. screws and rawl plugs embedded in the walls complete including cutting and making good the walls wherever required.

Providing and fixing white glazed vitreous china Division Plates for urinals (H.S.I. Cat no. 61001 approved equivalent of size 680x 300 mm.

Providing and fixing automatic high pressure electric water heaters VENUS-Magma-Vertical 25GV or equivalent make with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc. all complete. 25 litres

Providing and fixing ABS Hand Dryer (MEDIUM TRAFFIC) EURONICS Cat. No. EH 22 fixed in position by means of C.P. screws and rawl plugs embedded in the walls complete including cutting and making good the walls wherever required.

Providing and fixing C.I. square Grating at terrace RWP pipe complete in all respects. 225x225mm

Constructing of masonry Grease Trap with brick masonry in cement mortar 1:5 (1 cement: 5 fine sand) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including RCC Baffle walls, excavation and refilling inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) complete with Two nos. CI light duty Manholes covers of size 600x600x600mm at top slab. Size 2.0mx1.5mx1.0m deep

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. : (Quantity of depth of bore hole indicated in quantity is indicative. Exact depth will be ascertened as per water aquifer of site ) Rocky strata including Boulders 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. (Quantity of pipes of indicated in quanty is indicative. Exact depth will be ascertened as per water aquifer of site) 150 mm nominal size dia having minimum wall thickness 5.00 mm

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2mm) mild steel threaded and socketed / plain level ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. (Quantity of pipes of indicated in quanty is indicative. Exact depth will be ascertened as per water aquifer of site) 150 mm nominal size dia .

Providing and fixing M.S. clamp of required dia to the top of Casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp.

Development of tube well in accordance with IS: 2800 (part I) and IS 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewel, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (Quantity given is indicated in quantity is indicative. Exact time of development quality of water aquifer of site )

Providing and fixing single / multistage submersible tubewell pump suitable for 150mm bore with stainless steel casing, NORYL impeller, stainless steel shaft and built in non return valve coupled with submersible squirrel cage motors suitable for 145V ± 10% volts. 3 phase, 50 cycles AC supply. Capacity 250 lpm Head 50m to 60m Head may vary depdending upon depth of auqafire of site. The agency to quote accordingly

65mm dia GI column pipe of heavy class duly flanged.

Providing and fixing gunmetal pressure gauge (100mm dia) of rating (0-10 kg/cm2) with gunmetal isolating cock and connecting pipe.

Providing and fixing 65mm cable clips with nuts & bolts.

Providing and fixing 65mm dia supporting clamps with nuts and bolts.

Providing and fixing 3C - 6 sq.m submersible cable. (Quantity of cable may vary depding upon the the depth of water aquafire at site.)

Providing and fixing Butterfly valve of cast body with stainless steel disc and stainless steel stem, teflon bushing and niterite o'rings. 65mm dia

Providing and fixing steel wire rope 6mm dia complete with wire rope clamps for safety of pump set.

Supplying & laying 1.1KV grade aluminium conductor PVC insulated and PVC sheathed armoured cables including 8 SWG GI earth wire on surface/cable trays as required. 3 Core - 6sq.mm

Supplying of 150mm dia tail plug with all required specials complete as per directions of Engineer -in-Charge. 150 mm clamp.

Providing, fixing, testing and commissioning of Vertical in line type pump set with SS casing, SS impeller and SS shaft suitable for operation on 400/440 volts, 3 phase 2900 RPM, TEFC electric motor mounted on a common channel base plate with coupling guard, 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster complete as required. Filter Feed pumps Pump capacity - 100 lpm Head - 20 m RPM - 2900

Treated water supply pumps Pump capacity - 150 lpm Head - 55 m RPM - 2900

Providing, fixing, testing and commissioning non clog type stainless Steel mono block submersible drainage pumps suitable for handling solids of 12 mm size with totally water and dust proof motor Capacity 300 lpm & Head 10m ( In pump room )

Capacity 500 lpm & Head 15m (In basement)

Providing, fixing, testing and commissioning Transistorised liquid level controllers with low voltage Relays and Seamless Steel probes and PVC shroud, including necessary wiring and conduiting from probes to display panel/motor control panels and to provide Audible Alarm for low level for each underground tank. (The cost of all required cabling from probes to Motor control panels to be including in the rate). For Domestic Filter feed pumps To start domestic filter feed pumps at low water level in domestic treated under ground tank and stop at high water level in domestic treated tank and stop at low water level in domestic raw water tank.

For Domestic Treated water supply pumps To start pump at low water level in overhead tank and stop at high water level in overhead tank and low water level in under ground tank.

Providing and fixing skid mounted vertical MSRL Dual Media pressure filter fabricated from IS 226/2062 plate 5mm thick for shell and 6mm thick M.S. plate for dished ends complete with initial charge of filter media, face piping and valves accessories, painting, testing and commissioning complete. For Domestic water supply Capacity 6000 lph. Working pressure 2.5 kg./cm2 Flow velocity: 15m3/hr/m2 Design pressure 4 kg./cm2

Providing and fixing skid mounted vertical MSRL Activated carbon filter fabricated from IS 226/2062 plate 5mm thick for shell and 6mm thick M.S. plate for dished ends complete with initial charge of filter media, face piping and valves accessories, painting, testing and commissioning complete. For Domestic water supply Capacity 6000 lph. Working pressure 2.5 kg./cm2 Flow velocity: 15m3/hr/m2 Design pressure 4 kg./cm2

Providing and fixing bulk water meter with direct reading dial in KL, all internal parts and strainer in gun metal/brass. 50 mm dia

Providing and fixing direct reading rate of flow Rota Meter For 50mm dia for 6000 lph rate of flow for filter & activated carbon filter

Supply, fixing, testing and commissioning of chlorinator with metering pump mounted on HDPE white tank suitable for operation on 220 ± 5% single phase, 50 Hz AC supply, including cables from metering pump to control panel compete in all respects. Suitable for flow rate 6000 lph

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

Painting for G.I. Pipes with two or more coats of synthetic enamel paint of approved quality and shade over a coat of approved primer coat as directed including surface preparation (Shade as per pipe colour code) 50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

100 mm nominal bore

Providing and fixing gunmetal horizontal Non-Return Valve with flanged ends tested to 20 kg/cm2. 50 mm dia

Providing, fixing, testing & commissioning of skid mounted vertical MSRL Dual Media pressure filter fabricated from IS 226/2062 plate 5mm thick for shell and 6mm thick M.S. plate for dished ends complete with initial charge of filter media, face piping and valves accessories, painting, testing and commissioning complete. Capacity = 40 m3/hr. Design Pressure = 4.0 kg/cm2 Working Pressure = 2 kg/cm2 Flow velocity = 20m3/hr/m2

Providing, fixing, testing and commissioning of Vertical in line type pump set with SS casing, SS impeller and SS shaft suitable for operation on 400/440 volts, 3 phase 2900 RPM, TEFC electric motor mounted on a common channel base plate with coupling guard, 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster complete as required. Discharge : 21m3/hr. Head : 25m RPM - 2900

Providing and laying uPVC pipes for pumps & swimming pool piping confirming to IS 4985:2000 of pressure 6kg/cm2 with fittings i.e., bends, tees, reducers, plugs, union, flange & blank flanges etc including jointing, structural clamps, cutting chase and making good the walls, floors etc. wherever required. 90mm OD

Constructing of masonry chambers 60x60x75cm (inside) with 75 class designation brick work in cement mortars 1:5 (1 cement : 5 fine sand) for ball valve with C.I. manhole cover with frame size 600x600mm (light duty) fixed in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregated 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design. (The cost of exavation, refilling and compaction in layers as per sub grade of required density including watering required for compaction and disposal of surplus earth shall be included in rate).

Providing, fixing, testing and commissioning of electric driven booster pump suitable for automatic operation consisting of the following: (a) Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump (b) Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump. (c)Common bed plate of fabricated mild steel channel or cast iron type. (d)Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications: Discharge - 1350 lpm Head - 35 m No. of stage preferred - Single Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical Type of pump - End suction

Providing and making Drainage Provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum length of pipe shall be 10M.

Providing and fixing door with frame for all internal fire hydrants fabricated from 16 gauge CRCA M.S. sheet double door including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 5 mm thick float glass approved by local Fire Authority, stove enameled fire red finish with " fire hose' written on front with radium strip suitable to house 15 mm long four length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.).

Providing, fixing, testing & commissioing of Fireman's Axe of steel alloy as per IS: 926 (ISI marked) with heavy insulated rubber handle tested to 20000 volts.

Providing, fixing, testing & commissioning of 150mm dia Alarm control valve (Alarm valve) along with assemblies comprising of following: Upstream Butterfly valve of PN 16 rating. In and out pressure gauges. Test connection of adequate size with valve and orifice plate with pressure connections. Water motor gong with necessary Piping, Isolating valve, strainer and drain. Alarm valve will be straight through type suitable for wet pipe sprinkler systems. Valves will of Ductile Iron with gunmetal internals and suitable for vertical or horizontal installation. The valve clapper will be of cast gunmetal with neoprene. It shall be provided with the following: Water valve through a retard chamber. Test connection. It shall be vertically mounted and the direction of water travel shall be indicated on the surface. It shall be rated to 12 Kg/sq.cm and tested to 25 Kg/sq.cm pressure.

Supply, fixing, testing and commissioning of FM/UL listed Flow Switch on sprinkler riser and shall be connected to fire alarm panel through cable. Cable shall be measured seperately. 150mm dia

Providing & fixing 50 mm dia gunmetal Inspecting & Testing Assembly with ball valve (3 nos.), gunmetal sight glass, bye pass valve & connected to drain line. (Cost of all valves & fittings shall be included in the rate).

Providing and fixing Mechanical Foam type (ISI marked) Fire Extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 finished externally with red enamel paint and fixed to wall with brackets complete with internal charger. 9 litres capacity.

Providing and fixing fire signages printed on photoluminescent aluminium sheet of 2.0mm (+-10%) containing lumigen III as base chemical of appropriate size including fixing on wall, door, ceiling etc., with proper clamps, hangers, cleats, anchor fasteners etc., complete in all as directed by Engineer-in-charge. Fire Signages

Exit Signages

General Signages

Electrical Works : Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for HV/EHV installation.

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measures & displays trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero B411adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting vee cross arm with ISM channel of 75x40x6mm, for 11kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220 mm bent at angle of 60 degree keeping base 305 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts,washers complete as per specification no. OH-PL/VCA

Supplying and erecting 75x40x6 mm with 4.4 mm thick web and 7.3 mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065 mm for 11 kV,1320 mm for 22 kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCA

Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 75x40x6 mm. erected on pole complete as per specification no. OH-PL/VCA

Supplying & erecting single pole cut point channel set of for 11 kVHT OH line, two channel of size 100 x 50 x 6 mm 1.6 m long having stud angle of size 50 x 50 x 6 mm 1.5 m long long with necessary clamps, nut bolts etc. complete

Supplying & erecting inline D. P. structure for 11/0.415 kV, 200 kVA transformer with R.S.J. pole 2 nos. of size 100 x 116 mm x 11 Mtr. long with suitable distribution box of C.R.C.A. sheet 16 SWG with 4 pole MCCB 300 amps as incomer & 6 nos. 100 amps kitkat/MCCB for outgoing circuits. Transformer D.P. structure includes the A. B. switch 200 amps, D.O. fuse set & L.A. set, 2 nos. of top channel of size 100 mmx 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting Transformer. channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete.

Supplying and erecting ACSR conductor of size 6/1-3.66 mm complete.(Mink) (255 kg/km) as per specification no. OHCON/ ACSR

Supplying and erecting porcelain disc type insulator with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI

Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, complete as per specification no. OHINS/ PN

Supplying and erecting G.I. stay set for poles, including loopinsulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation.

Supplying and fixing MS base plate 30x30x0.6 cm size fixed to the pole base either by welding or by set screws 12 mm. dia fixed at position.

Supplying and erecting guarding lace for H.T.O.H. line with 8 SWG G.I. wire to protect the H.T. overhead line with binding wire of 20 SWG G.I. wire for 75 mm section on either side.

Supplying, installing, testing & commissioning 3 phase,11/0.433 kV, 50 Hz., 250 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not Exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II, with necessary permissions of Electrical Inspector, as per specification no SS- TR.

Supplying , erecting & terminating 3 x 95 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT

Supplying, erecting and commissioning of diesel generating set with alternator of 160 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG (suitable for AMF operation from LT Panel)

Supplying & erecting on line UPS pure sine wave of 2 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 12 ways, on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 36 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/ MCB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C- series in provided distribution board as per specification No. SWSWR/MCB

Supplying and erecting blanking plate of suitable size on MCB DB

Supplying and erecting static energy meter with 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, V, I, kW, six month history of energy and MD in kVA ) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.

Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm PVC conduit with 1.5sq.mm (2+1E) FR grade copper wires,moduler type switch and socket, earthing and required accessaries as per specification No WGPW/ SW

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete. (for Lan & telephone-Museum, Statue)

Supplying and fixing cat-6 STP cable suitable for LAN / WAN as per specification complete.

Supplying & erecting jelly filled armoured telephone copper cable 10 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying, Installation, Testing & Commissioning plan analogue type plan 1+1 twin instrument telephone set with speaker phone and display complete.

Supplying, installing, testing & commissioning analogue type EPABX of 3 x 8 extensions complete.

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount unit as per specification complete

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick luminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) suitable for 9 W - 12 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting square / round shaped , surface mounted , CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver & mounting bracket etc. complete.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. Make : Wipro / Divinity / Havells / Litolux

Supplying and erecting LED Flood light fitting of 50W, wide beam, including lamp, driver, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2 Make : Havells / Litolux / Wipro

Supplying and erecting LED Flood light fitting of 150W, including lamp, driver, narrow beam, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 Make : Havells / Litolux / Wipro

Supplying & erecting mains with 3x2.5 sq.mm FRLHS copper PVC insulated wire laid in provided conduit / trunking/inside pole / Bus bars or any other places as per specification No: WGMA/BW (inbetween Pole & Bollard)

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete. (on Top of Statue)

Providing & erecting 4 m high galvanised CONICAL pole with foundation bolts having bottom dia. from 115 to 130 mm, top dia. From 65 to 75 mm on provided foundation as per specification No. OH-PL/CPL (Pole Colour as per approved by Consultant)

Supplying and erecting ABC powder type 'Ceasefire' type fire extinguisher as per IS : 13849/15683 of 1 kg capacity with necessary clamp for erection on wall.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Bandaid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes) Details of LT Panel, MDB STATUE & MUSEUM, Feeder Pillar-1, Feeder Pillar-2 & Auto Phase Reversal Panel :-

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A complete as per specification no. CP-BB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A complete as per specification no. CP-BB

Supplying and erecting ISI mark modular type indicator lamp, erected on provided plate and box with wiring connectionscomplete.

Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measuresimport kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey,TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for three phase and neutral as per specification no. CP-SPD

Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided MS. box in an approved manner.

Supplying and erecting dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer

Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying, erecting, testing and commissioning 4 pole power contactor 80-130A with coil voltage of 220/240 V suitable to operate on AV voltage for DG set.

Supplying, erecting, testing and commissioning 4 pole power contactor 325A with coil voltage of 220/240 V suitable to operate on AV voltage for DG set.

Supplying, erecting, testing and commissioning 4 pole power contactor 400A with coil voltage of 220/240 V suitable to operate on AV voltage for DG set.

Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (=4161*20% for 4P MCCB as per CSR)

Providing & erecting 4 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (=8663*20% for 4P MCCB as per CSR)

Providing & erecting 3 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (=11761*20% for 4P MCCB as per CSR)

Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (=15690*20% for 4P MCCB as per CSR)

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (4.2m x 1.35m x .6m = 3.5 Cum )

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (4.5m x 1.7m x .9m =6.9 Cum )

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 140 kVA upto 180 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

S u p p l ying and erecting 100 kVAr, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.

SITC of surface/ suspended mounted approx 28~36 Watt Led linear Light with diffuser (IP65), 230 volt, CW, complete with driver, mounting bracket etc all. Make : Wipro / havells / Litolux / Divinity

Supply and fixing of Pendant luminarie approx 15W ~ 20W LED, approx 1400lm, 4000K, direct light distribution through opal diffuser, body in die formed sheet metal powder coated (color as per approval from designer), pendant mounting through suspenders, integral HF electronic control gear IP40, Ø=400mm ; H=100mm ; Length=300-1500mm max. Fixture Dia: 400mm / 600mm / 900mm (as per designers approval later) Make : Wipro / havells / litolux / Divinity

SITC of surface/ suspended/ recessed 1 meter Track with 3 Circuit, inclusive of live end with power feed and dead end. Make: Nordic Aluminum / Litolux / XAL

SITC of surface/ suspended/ recessed 2 meter Track with 3 Circuit, inclusive of live end with power feed and dead end. Make: Nordic Aluminum / Litolux / XAL

SITC of Straight connector fot above tracks Make: nordic aluminum/ ivela / Litolux / XAL

SITC of L and T shape connector (90 degree bend) for above tracks Make: Nordic Aluminum / Litolux / XAL

SITC of above Track Mounted (compatible) Compact high output approx 13~23w LED Spot Light with professional optics (wattage and beam angle as per designers approval at later stage) with varying field light distribution/ beam angle options (as approved), die-cast construction, three circuit track adaptor as standard, supplied with integral non-dimming driver, Lockable tilt and rotation upto 355 degree, output of approx 1200~2000 lumens, approx CRI 90+, CCT 3000K / 4k, LED modules with a narrower colour temperature tolerance and binning within 1 x 2 MacAdam Ellipses, inclusive of softening lens / honeycomb louvre, etc as needed, single Led module only with reflectors to control the light, and the fixture should be properly heat synced & complete in all respect. Make: Dotspot / Exenia / XAL / Litolux

SITC of track or surface mounted adjustable LED framer spot light fixture with 6.5W in 3000K CRI90 having net lumen out of 143lm. Total System Wattage of the fixture should not exceed 9.8W. LED's should be from MacAdam Step:2. Miniaturised adjustable profiler projector complete with adapter built into semi-hidden box containing the DALI dimmable electronic driver that allows the light emission to be adjusted. Die-cast aluminium technical body for LED lamp; high definition OptiBeam reflector. The aluminium optical assembly includes a sophisticated telecentric optics system consisting of four anti-reflection-treated glass lenses. Black anodised aluminium locknutfor manual focusing. The innovative optical system, combined with the option of manual adjustment and four shaping flaps, allows precise, well-defined wall lighting with no halo effects or soft edges. The optical assembly is fixed to the technical body with a rapidand practical magnetic system. This solution allows it to be rotated by 360° which increases its versatility considerably. The projector is designed to obtain a square, rectangular or variously irregular beam by manoeuvring the flaps. The package includestwo gobos for circular shapes.Life Time: > 50,000h - L80 - B10 (Ta 25°C). Dia of the fixture should not be more than 38mm. Complies with EN60598-1 and pertinent regulations and should be BIS certified. Make: iGuzzini Paloc Framer/ ERCO/ LTS /Exenia

SITC of weatherproof outdoor gobo projector, IP 64, made of Steel / Aluminium, is equipped with the latest LED technology and is passively cooled without a fan. The lens is equipped with a special gasket, which prevents the penetration of moisture. All encapsulated electronic components are waterproof. The projector is connected via a watertight connection tube. its 22 watts High-Power LED, suitable for projection distance of 26 feet at dusk and night. The projector is especially suitable for outdoor projections on facades or portals, messages on pavements or areas in pedestrian zones – up to a diameter of about 10 feet. The projection motif (gobo) can be changed without tools. 0 db noise, Working temp -5 to +35 degree, L70, 35,000 Hrs, CCT 6k, 1800 Lumens, gobo sizes, approx. 50mm / 40mm dia, 230volt , total power approx. 29 watt, with mounting bracket etc. complete in all respect. Make : Derksen / Dotspot / We-ef / selecon / Litolux

SITC of Outdoor rated dynamic Gobo Projector approx 350watt LED surface mounted Projector with IP66 water proof image projection CRI>90, equipped with intelligent zoom 8-40 degrees which can be linearly adjusted. Focusing smoothly and precisely in control, having built in rotateable gobo wheel and dynamic effects wheel, prism and other functions. Can achieve a wealth of dynamic pattern simulation effect and equipped with a n excellent optical system, the light spot is uniform with clear cut margin and the pattern image is vivid, Wattage of 350W with 240V AC input supply to the product. including 0-100% 16 bit dimming (including controller & programing) featuring natural convention cooling with DMX 512 interface RDM rotating gobo 7gobos. ambient temperature of 0 to 45 degrees having housing in diecast aluminium weighing approx 23Kgs. Dimensions approx 605X 343X 250mm. Make : Dot-Spot / Griven / Martin

SITC of approx 160w LED flood surface mounted Luminaire fixture having housing made in die-cast aluminum with modular luminaire structure and should accommodate multiple modules for better flexibility of choosing the right wattage with range of various luminous intensity levels for large area illumination applications. Fixture should have ingress protection rating of IP 66 or above . Fixture should have minimum impact resistance of IK 08 or above. Fixture should have inbuilt surge protection upto 10KV or heigher. Fixture wattage should be in the range of 140W to 160W. Fixture should have CCT of 2700K / 3000K / As per Consultant with CRI 70 or above. Fixture should have range of efficacy of 95-120 lm/W or above. Fixture should have mixed lens distribution with different distribution types on the same luminaire (From Mix of Type - I,II,III,IV & V) thus achieving wide & in depth illumination with maintaing good uniformity level. Fixture should be well glare controlled and full cut off lumnaire is more preferable. Fixture should withstand opertaing temperature of 0°C to +50°C. Make : R1 EWO / LEC / Lumenpulse / BEGA

SITC of approx 12w LED uplight ground recessed (outdoor recessed IP67, IK 10) light flush with the ground, suitable for vehicles and pedestrian traffic, it is designed with materials that preserve them from the aggression of oxidizing agents. The optics are symmetrical, adjustable +/- 7°, rotation of beam approx 26 degree, output of approx 1500~1800 lumens, CCT 3000K. A range of professional optics are available as accessories, to get different beam angles. Recessed housing included in the fittings with 240V AC input supply to the product. MAke : Achille190 Ivela / DotSpot / Litolux / Simes

SITC of approx 2.8w LED concrete wall recessed (outdoor recessed IP67) Equipped with LED sources having Separatly Integrated mounting driver availability, it is ideal for outdoor applications, but it can be used also indoor. The frame, the decorative plate and the inner body can be mixed, to obtain different combinations of colour and of luminous flux. The inner body includes the luminous source, the driver and the recessed housing., rotation of beam 53/91 degree, output of approx 100~140 lumens, CCT 3000K. A range of professional optics are available as accessories, to get different beam angles. Recessed housing included in the fittings with 240V AC input supply to the product. Make : Wall-Cut 150 aria Ivela / Simes / Dotspot / Litolux

SITC of Underwater Wall Recessed Luminaire.Fixture should have stainless steel housing with silicone gasket.Front Cover & Housing Molding shaped sus 316L. Approx 5W in 24VDC.Fixture should have beam angles of 20°/25°/30°/35°/45° (as approved). CCT should be 2000K / 3000K / 6000K. Ingress protection should be IP68. Fixture should be compatable with Triac, PWM, 1-10V, Dali dimmimg options. MAke : DotSPot/ BEGA/ LEC

SITC of approx 0.55M high bollard, equipped with approx 20watt LED Module. No glare.Luminaire made of aluminium alloy, aluminium and stainless steel Borosilicate glass Silicone gasket Connecting cable length 1,2 m, LED power supply unit . 220-240 V x 0/50-60 Hz. DC 176-280 V. DC Start ≥ 190 V. A basic isolation exists between power cable and control line . Safety class I. Protection class IP 65. Dust-tight and protection against water jets. Impact strength IK10. Protection against mechanical impacts < 20 joule. Module designation 4x LED-0697/830, Colour temperature 3000 K, Colour rendering index CRI > 80 Module luminous flux 2320 lm, Luminaire luminous flux 392 lm, Luminaire luminous efficiency 19,6 lm / W. CE Certified. Make: Bega/ B Light / Acquity

SITC of 36w pole/ post top mounted luminaire for parks, pedestrians, bicycle routes. Fixture should be base – high-pressure die-casted aluminium alloy cap – formed aluminium sheet diffuser – frosted cylindrical ø200 mm (PMMA). Ingress protection of IP 65. Life span of L90F10 – 50 000 h, L80F20 – 100 000 h. Operating temperature range: from -40°C to +40°C. CRI: >80. Fixture should have wide symmetrical beam distribution.wattage of 36W with delivered output of 3800lm. (shall be compatible with 4 mtr pole). Make: Haper / EA System / Litolux / Rosa

Providing and erecting Vacuum Circuit Breaker panel Indoor type including CT of required ratio for metering and protection including 3 O/C and E/F relay and high speed trip relay. 11 kV system 630 Amp 25 kA - Vacuum Circuit Breaker (Indoor type)

Supplying and erecting armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner. 10 core 2.5 sq mm Copper conductor PVC insulated, armoured control cable (from DG Controller to AMF Panel)

Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 20 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC, para no. 1.2.3

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FF-FAS/HD

Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning remote response indicators complete as per specification no. FF-FAAS/RRI

Supplying, erecting, testing and commissioning of 1 sq mm speaker wire complete

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 20 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC, para no. 1.2.3

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 450x550x767 mm) as per specification No. WG-NAS/RAK Make: Valrack/ APW / Rittal

Supplying, erecting, testing and commissioning amplifier 120 W for public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FFPA/AFR

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting & terminating PVC armoured cable 2 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK Make: Valrack/ APW / Rittal

Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS

Supplying and fixing cat-6 LSZH cable suitable for LAN / WAN as per specification complete

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing manageable wireless dual-band 802.11 n/ac unified wireless access point in WLAN network as per specification no. WG-NAS/LAP1

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 15 mtr cord length with male/female 19pin HDMI connectors as per requirements complete.

SITC OF 2MP IR Bullet Varifocal Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps,2.7 to 13.5 mm Varifocal Motorized lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card included), Audio: 1 Input, 1 Output, Alarm: 2 Ch Input, 2 Ch Output IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Scene change detection,Motion detection, Face detection, Video tampering, UL, FCC,CE certified.Video tampering, UL, CE, FCC certified. Make: Bosch / Honeywell / Pelco

SITC OF IP PTZ Camera 25X, 1/2.8" 2 Megapixel STARVISTM CMOS Powerful 25X zoom, Starlight Technology, H265 Encoding, Max. 50/60fps@1080P, Resolution 1080P (1920 × 1080)/720P (1280x720)/D1 (704x576/704x480)/CIF(352x288/352x240) frame rate main stream: 1080P/1.3M/ 720P (1~ 50/60fps. Sub Stream 1: D1/CIF (1~25/30fps). Sub Stream 2: 1080P/1.3M/ 720P/D1/CIF (1~25/30fps) auto tracking & IVS, Support POE+ IR distance up to 150m, IP66 Focus Length 4.8mm~120mm Max. Aperture F1.6 ~ F4.4, Angle of View H 62.8" ~ 2.6". Focus Control Auto/Manual. Close focus distance 100mm ~ 1000mm, Radio compression G. 711a/G.711Mu/AAC/G.722/G.726/G.729/ MPEG2-L2, power supply AC 24V, 3A, (+-10%) POE+ (802.3at.) Power consuption 13W, 23W (IR on) Make: Bosch / Honeywell / Pelco

SITC of 32 Channel Network Video Recorder vedeo / audio input IP video Input 32CH, Two way Audio-1ch, RCA Network Bandwidth 320 Mbps (I/C & O/G) Remote user-128, Protocol-P2P, Upup,,NTP,DHCP,PPP06, Video / Audio Output - HDMI-1 (VGA, 1920x1080x1024/60Hz. 12MP/8MP/6MP/5MP/4MP/3MP/108, Recording Resolution Op/960p/720p/DI/2CIF/CIF, Audio Output -1Ch,RCA, 16-Ch Playback corridor mode-3/4/5/7/9/10/12/16/32, Decoding Hormat-H.265, H 264 Live View Play back-12MP/8MP/6MP/5MP/4MP/3MP/108, Capability 3x12MP @ 25.4x4K @30, 16x1080p@30,32X, Hard Disk Sata-1 Sata Interfaces up to 10 TB for each HDD, External Interface & Network Interface-2RJ 45 10M / 1000M / 1000M Self, Seriel Interface-1xRS485, USB front panel, 1xUSB 2.0 Rear Panel-1, Alarm In-16Ch, Alarm Out-4Ch, Power Supply-12V DC, Power Consumption 12W (Without -10 degree + 55 degree C (+14F+131F) Environment Dimensions-Humidity 90% RH (non Condencing) 440mmx50mm (17.3"x13.5'x2.0") (WxDxH) Weight without HDD 3.14KG, (6.92lb) Certification with 3 Years Warranty. - CE, FCC, UL. Make: Bosch / Honeywell / Pelco

SITC of 4TB Hard disk. For surveillance purpose With with 3 Years Warranty.. complete in all respect. Make: Seagate/ WD

SITC of Commercial Grade LEDs Surveillance Monitor / Screen - 40 Inch smart LCD for 24x7 operations. With adaptor & wall / table bracket complete in all respect. Make: Samsung/ LG/ Panasonic

Supplying, erecting, testing and commissioning 28 HP, VRF / VRV air conditioning system, outdoor unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R-410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling evev at 56 deg, celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length up to 1000 meter operation in cooling mode with inverter based VRF / VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, aor cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415 V ± 10%, 50 HZ, 3 phase power supply, internal copper refrigerant piping internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 8.0 TR (3200 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.

Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls mimimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having mimimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.

Supplying and installation of high pressure grade required size copper connection Y or T-Joints / refnet for liquid and suction line complete erected on wall / ceiling with supports / raceways, Nitrile rubber insulation, painting, etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

SERVICING AND MAINTENANCE CONTRACT FOR AIR CONDITIONING UNITS Comprehensive service & maintenance charges of VRF AC units of per 1 HP per month

Inline Fans : Supply, installation, testing and commissioning of inline fans of G.I. construction, complete with centrifugal fan with motor, canvass connection at inlet & outlet complete with electric panel with MCB & relays, cabling & earthing (with 5 Rm). 1500 cfm, 15 mmwg S.P.

Supply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification. 2500 cfm, 40 mmwg S.P.

Supply, installation, testing and commissioning of weather proof floor mounted double skin DIDW centrifugal exhaust scrubber with fan with motor and drive (both fan and motor shall be mounted on a common frame using cushy foot mounting) with back suction and front discharge including vibration isolator, water tank with float valve, pump, distributor, nozzels, eleminator, piping & valve from tank to pump to distributor and M.S. frame for supports etc. as per specifications and drawings. 3000 cfm, 65 mmwg S.P.

Tube Axial Flow fans (Fire Rated) (For Smoke Spill Exhaust) ( Fire rated : 250 deg for 2 Hrs. ) Supply, installation, testing & commissioning of smoke extract fans as per specifications. Fan shall be direct driven type with long casing (motor should completely accommodated in fan casing). AMCA Certified (For Air and Sound & FEG Performance) tube/vane axial flow fan of different capacity as mentioned below in standard M.S./G.I. contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet, along with backdraft dampe at outlet. Fan shall be with flexible fire proof connections at inlet and outlet. The electric motor shall be suitable for 415+/- 10% volts, 50 cycles, 3 phase AC supply with high efficiency, IE-3 type with class `H' insulation. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hour as per (BS-7346 Part 2:1090).Fan shall be CE or UL or EN certified for high temprature. Fan Total Efficiency should be as per NBC-2016 Part 8 section 3, noise level should not be more than 75 dba for normal operating condition and 85 dba for emergency operating condition when measured in hemisperical reverberant room conditions at a distance of 3 mtrs from the fan.Cost of spring isolators & back draft damper for the installation of the fans needs to be included.Cost of spring isolators & back draft damper for the installation of the fans needs to be included. Fan shall be activated receiving signal from fire alarm system. Fans should be as per specification. 13,500 cfm, 30 mmwg S.P.

Refrigerant Piping : Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Drain Piping : Supplying & erecting HMS PVC conduit 32 mm. dia. with necessary accessories in wall / floor with chiselling appropriately as per specification No. WG-MA/CC.

Supplying & erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm.

Ducting : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. The ducts shall be fabricated from galvanized steel sheets class VIII confirming to IS: 277 - 1962 (revised). All duct work, sheet metal thickness and fabrication shall strictly meet requirements, as described in IS:655 - 1963 with amendment - I (1971 edition). All ducts shall be supported from the ceiling / slab by means of M.S. rods of 10 mm dia for ducts up to 2250 mm sizes and 12 mm dia for larger sizes with M.S. angle at the mottom. G.I. Sheet Metal Ducting (Rectangular) Thickness 1.00 mm sheet(1501 mm - 2250 mm) 20 SWG

Thickness 0.80 mm sheet (751 mm - 1500 mm) 22 SWG

Thickness 0.63 mm sheet (750 mm & below) 24 SWG

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R - Value as per the prevailing provision in ECBC -2007.

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48 kg/cu.m fibre glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

Grilles/Diffusers : Suppying and installing of collar damper of galvanised iron material of upto 120 micron for anti corrosive resistance for supply air grill of required size.

Supply and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.

Supplying and erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided supply and return air.

Louvers : Supply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.

Supply, fabrication, installation and testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

Supplying & erecting mains with 2 c x 1.5 sq.mm F.R copper OVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars on any other places as per specification No: WG-MA/BW.

Supplying & erecting mains with 2 c x 1.5 sq.mm F.R copper OVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars on any other places as per specification No: WG-MA/BW.

Cable Tray : Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Power Cabling : Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq.mm. aluminium conductor with continous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / AL

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq.mm. copper conductor continous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / CU

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq.mm. copper conductor with continous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / CU

Isolator : Isolator / Switches as per IEC 60947 Part 3 / IS 13947 part 3 to be enclosed in CRCA Sheet steel 18/20 SWG standard with powder coated, rust protected(if 16/18 SWG/1.62/1.21 mm Nost avilable) with bus bar, earthing terminal, and all other accessories to complete the work. Isolator shall be wall/column mounted. Enclosure shall be weather proof. Colour shade shall be as per IS 5. MS angle iron frame to mount the unit is included.IP for enclosure shall be IP43 for Indoor unit and IP 55 for Outdoor unit. 63 Amps

Supplying and erecting GI strip of required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

COMT CONSTRUCTIONS PVT LTD