HT INTERLINKING FROM VELUR WEST TO THORAYI USING COVERED CONDUCTOR WITH INSTALLATION OF ONE 100KVA TRANSFORMER UNDER ELECTRICAL SECTION ATHOLY

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Transporting Transformers by hired vehicle to a distance beyond 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs (Running km).

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Dismantling one section fuse

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one set AB switch and giving connection

Drilling hole of various sizes on existing Channel/Cross Arm.

Erection of suspension clamp for LT ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Renewal of existing damaged/old LT PSC/RCC (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Providing Strut using LT PSC pole incl. digging & back filling pit.

Straightening one Slanted LT pole after unbinding the line and rebinding the line after work.

Insertion of one LT PSC pole in existing Sph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Providing Stay for LT poles incl. digging & back filling pit.

Renewal of existing damaged/broken old LT stay with existing stay rod.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap : 4-35 sqmm

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated pre-painted M.S. cable trays

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.

Please Enable Macros to View BoQ information