Rigadiya-Rising main and other works

Amount

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MSERW PIPE YST 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

From Top CWR -01 to CWR 03 MSERW Pipe 50 mm Dia 3.9 mm Thickness

Excavation of earth for pipeline in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assuming that 90% pipe line is laid in trenches, it is estimated that 100% excavation will be in soil mixed with shingle, bajari and boulders.

Soil mixed with boulder (SMB)

Supply & fixing of following sizes of valves including carting the same up to side of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect

50 mm dia Cast steel sluice valve WP-30Kg /cm2

50 mm dia Cast steel Check/Reflux valve WP-30Kg /cm2

C.I. Air valve (Double Acting) 80mm

Supply of all materials, labour, T & P etc. and Construction of size Sluice Valve / Reflux Valve / Scour Valve Chamber as per type design complete(1.2x1.2x1.2)

Supply of all materials, labour, T & P etc. and Construction of size Air Valve Chamber as per type design complete(1.2x1.2x1.2)

Supply of all materials, labour, T & P etc. and Construction of R.C.C Anchor Block @ 50 m interval as per type design complete

Makig 2 M wide Briddle path for rising main including hill side cutting and coolie walling of all materials, labour, T & P etc.

Painting of MSERW Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (Dia of pipe in mm)

50 mm dia

Supply of all materials, labour and T & P etc. and construction of R.C.C. Sump / Clear Water Reservoir of following Capacity in K.L. as per design and drawing including fixing of pipes,Bucket type Chlorinator 25 litre capacity and fittings including cartage of materials etc. complete

Clear Water Sump 50.0 KL Capacity at CWR -03

Supply of all materials, labour and T & P etc. and construction of Pump House as per type design and drawing

At Top Cwr for cwr-03

Provision of 1.5 m high Boundary Wall in brick masonry including supply of all materials, labour, T&P etc. complete

Proposed at CWR -03 Campus

Provision of Barbed Wire Fencing through angle iron posts around the water works site

Proposed at CWR -03 Campus

Provision of M.S. Iron Gate with Pillars of following sizes complete

3.6 m wide

Provision of Drainage System consisting of following works

Supply of all materials and construct of Manhole chambers

Supply & laying of drainage 250 mm dia. RCC NP2 pipe

Supply of all materials and construct 150 mm S.C. drain including supply of all labour T&P etc complete

Protection Work

Excavation for foundation in Soil mixed with boulders

Random Rubble Stone Masonry in 1:6 cement and sand mortar including supply of all materials, labour, T&P etc. complete.

Random Rubble Stone Masonry laid dry including supply of all materials, labour, T&P etc. complete.

Stage-V (Zone-2): Centrifugal Pump Clear Water (200 LPM, 215 M Head)

Electric Motor

Base Plate

Fully Auotomatic Auto Transformer Starter

125 Amps Main switch with neutral link 4 Pole

Control Panel

Power Wiring & Earthing Material

Main Piping & Valves

Gauges

Tools

Grease premium quality (High Temprature)

Heavy duty crimping tool

80 Electro Magnetic Flow Meter

Rubber Resistance Sheet (1×2×0.025 M)

Transformer oil (1 Drum=209 Ltrs)

Installation & commissioning of Pumping Plants & related acceessories

Testing : At Works

At Site

Painting

Carting

Maintenance (one year)

SHIVRAJ BANAULA