Drought 2023 24 Balance Work Construction of pump house, Installation of submerssible motor pumpset

Amount

SUPPLY AND FIXING SUBMERSSIBLE MOTOR PUMP SET

OD268215/2024-2025:1) Supply, erection, testing and commissioning of KWA prequalified reputed make tube well submersible pump set with SS impeller, SS shaft and CI pump casing suitable for bore well with 180 mm dia inner casing pipe. The duty condition is as follows 2) Motor - Supply, erection, testing and commissioning of KWA prequalified reputed make vertical solid shaft foot mounted TEFC 3phase induction motor suitable for the above pump set working 3 phase, 50 Hz , 415 V working in AC supply. 3) Soft Starter - Supply erection, testing and commissioning of suitable rating (Fully automatic ) starter for the above motor with over voltage and under voltage protection , single phase preventer, over load relay with motor protection relay complete 4) Panel board (suitable for operating two pump sets bunt one pump set at a time ). 5) Valves- Supply of suitable size best quality heavy duty ISI marked double flanged sluice and Non return valves with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valve. 6) Suction and delivery pipe connections - Supply and fitting of suitable size best quality G I pipe (Medium) for total length of 10 meter suitable for the above pump set connecting the delivery side of the pump with valves and suitable specials to connect with the pumping main. 7) Supply and installation of suitable glycerin filled pressure gauge. 8) Maintenance for a period of two years

OD268219/2024-2025:Supply conveying and fixing of three phase, 415 volt and 50 Hz module for mobile starter & submerssible controller conforms to IS/IEC 60947-4-1 with features of auto restart, vibration proof enclosure with IP54 protection class, ON/OFF , voltage and ampere indication and protection against overload, single phasing , phase reversal , phase imbalance. etc

OD268218/2024-2025:Supply and erecting 27 Gauge 63mm inner dia uPVC submerssible column pipe. including cost of pipe and specials and all labour charges,hire charges of machineries ,etc. complete as per the direction of departmental officers

OD268216/2024-2025:Supplying and fixing 6 sq mm three core flat submersible cable

CONSTRUCTION OF PUMP HOUSE

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.9.2:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

13.37.1:White washing with lime to give an even shade:New work (three or more coats)

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

OD80515/2025-2026:Towards the charges of fixing of scheme board, in pump house structure using approved materials as per the direction of departmental officers.

LINKING BORE WELL WITH EXISTING PUMPING MAIN

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

OD268221/2024-2025:Linking of 90mm PVC new line to existing PVC/AC/GI line including all labour charges and charges for hire and conveyance of tools and plant, cost of consumable charges for lighting ,watching,ribbon fencing,caution boards,traffic diversion,as per the direction of departmental officers etc.

OD268222/2024-2025:Providing and fixing Protection tube for Sluice/GM Valve size up to 150mm

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

SUPPLY OF MATERIALS

100.98.213:Supply of PVC Pipe, 6kg/cm2, 90mm Dia.

OD268224/2024-2025:Cost of PVC specials @ 3%of cost of PVC pipe used

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

18.12.8:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore

KSEB Charges

OD268226/2024-2025:Cost of KSEB Connection charges

FRANKLIN JOSE (BID ID -2252443)

Bidder Name

M SIVADAS

FRANKLIN JOSE