Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC JHABRERA ROAD NEAR POWER STATION MANGLOR DISTT HARIDWAR UTTRAKHAND | MANGLOR | HARIDWAR | UTTARAKHAND | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹36.5 L+₹2.4 L (6.96%)Rejected-Finance 800 RAM NAGAR ROORKEE DISTT HARIDWAR UK PIN 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-Finance NOT A LOWEST BIDDER | |
| 3 | L3₹36.7 L+₹2.6 L (7.50%)Rejected-Finance | L3 | Rejected-Finance NOT A LOWEST BIDDER | |
| 4 | L4₹41.7 L+₹7.6 L (22.3%)Rejected-Finance SHOP NO 10 ASHRAM MANDIR NAKATIA P O P A C SHAHJAHANPUR ROAD BAREILLY 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L4 | Rejected-Finance NOT A LOWEST BIDDER |
Tender Value
₹47.7 L
EMD Value
₹95,400
Closing Date
15 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 871 EWS
GE 871 EWS 913871 C/O 56 APO
SPL REPAIR TO BLDG NO. P-04, P-22 AND P-38 OF 342 FD REGT AT NARENDRA NAGAR UNDER GE 871 EWS
2024_MES_646754_1
8796/E8
Open Tender
Civil Works
Item Rate
180 days
NARENDRA NAGAR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE 871 EWS
₹95,400
Yes
15 Oct 2024
18 Mar 2024
16 Apr 2024
18 Mar 2024
15 Apr 2024
1 Apr 2024
Amount
Dismantling plain corrugated steel sheeting any gauge thickness including Nainital and similar pattern complete all as specified and directed.
Dismantling wrought iron or mild steel of any description complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground lebvel) complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of reinforced cement concrete in any position of any description etc complete all as specified and directed.
Dismantling of 100 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required complete all as specified.
M&L 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified.
Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:-
Area not exc 1.5 sqm each
Area exc 1.5 sqm but not exc 4 sqm each
Taking down shutters of any description, of following size complete all as specified and directed:-
Area not exc 1.0 sqm each
Area exc 1.0 sqm but not exc 2.0 sqm each
Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.
All as per item no. 15 above but 20 mm bore complete all as specified and directed.
Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specified and directed.
Dismantling of frame work timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (Using 40mm graded stone agg) 75 mm thick in sub base finished even & smooth complete all as specifed and directed.
M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection complete all as specified and directed.
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, 40mm thick as in floor, coping, finish the surfaces even and smooth with using extra cement complete as specified and directed.
Supply only integral water proofing compound
M&L for rendering, 10 mm thick in cm 1:4 on other than fair faces on PCC padding for smoothning the surface or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC (1:2:4) type Bo using 20 mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed.
M&L for water proofing treatment on non approachable/non accessible roof surfaces (Horizontal /vertical)in following sequences through manufacturer /authorised applicator of the manufacturer complete all as specified and directed complete including taking down old APP membrane
(a) Properly cleaning and drying cement surfaces .
(b) Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm.
(c ) Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method.
(d) Applying two coats of bituminous aluminium paint @ 200 gram/sqm(minimum).(Note:-Make/brandk of APP membrane mmodified with all associated items shall be of any approved make.
Disconnecting the existing PVC OH, tank of 500 Ltr capacity and refixing the same after cleaning & roof treatment all as specified.
M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately)
M&L for rendering 5mm thick in ceiling CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item).
M&L for preparation of newly plastered surface of interior wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacturer of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.
Preparation of new plastered surfaces of wall and applying two coat of distemper on ceiling surafce all as specified.
M&L for preparation of old decorated distempered surfaces on internal walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and making the surface smooth by wall care putty rubbing with sand paper and applying one coat of acrylic distemper by using roller/ spray machine complete all as specifie and of approved tint and make complete all as specied and directed at site by Engineer-in-Charge.
M&L for preparation of old surface on ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying two coat of acrylic distemper by using roller/ spray machine complete all as specifie and of approved tint and make complete all as specied and directed at site by Engineer-in-Charge.
M&L for preparation of old decorated surface of exterior wall by complete removal of existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of exterior anti fungal acrylic emulsion paint of required shade (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.
M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
All as per item No 43 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic tiles Coloured 350 x 250mm/450 x 350mm 8 to 10 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.
M & L for Chequered cement concrete tiles 20Cm x 20 Cm x 20mm thick over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified.
S&F PVC prelam sheet wall/ceiling paneling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fix the strip to the wall vertically at an equal interval of 10” between two PVC strip. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent including dismantling of old wooden boarding complete all as specified and as directed
M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed.
S&F mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping scrws as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and directed.
S&F for false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid, complete all as specified and directed.
M&L for MS fastner of FI 50x5mm size and length 200 to 250mm for fixing wooden door/ window frame and like in postion complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of following size comprising of virgin PVC polymer having K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and direction. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable and variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately.
65mm x100mm size
65mm x 125mm size
M&L for 30mm thick factory made solid WPC (wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texteure, including stainless steel wire mesh shall be fixed with 15 x15 mm square tube in side rails with screwing 8 x 28 heat metal zink coated screw can be remove or fix again after changing of wire mesh, when needed. The density of the shall be as per manufacture instruction compete all as specified and directed.
M&L for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately.
M&L for factory made 35mm thick 100% solid WPC window glazed shutter and Gauzed (wire mesh) shutter 95 mm x35mm thick. Made from WPC material with density not less than 800 kg/cum. All four corner are fusion welded & screwed with 8 x 50mm self-screws for additional strength. After joining all 4 corner clear space to be paneled with 5mm thick glass / S S mosquito mesh after glazing of inside of shutter 10 x 12mm pvc “L” shape bead to be nailed or sticked with shutter. Provided 2 Nos SS hinges of 100 mm, 1 Nos aluminium handle of 125 mm , 2 Nosaluminium tower bolt of 125mm and 01 peg stay for each shutter (Glazed and Gauzed) incl factory made 100 % solid WPC window frame 125 mm x 65 mm double rebated frame & mullion 125 x 80mm. made from WPC (Single extruded process) material comparising of virgin PVC polymer of K value 57-60 (suspension grade), calcium carbonate and natural fibers (Wood powder/ rice husk/wheat husk) and nontoxic additives fabricated with meter joints after applying PVC solvent cement & screwed with fully body treated star headed screws having minimum frame desity not less than 800 kg /cum, having good screw holding capacity (screw withdrawal strength of (min 990N). Minimum compressive strength of 58 N/mm2. Modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / mosquito proof & fire retardant & fixed in position with fasteners / hold fast of required size. Window shall be provided with MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat including painting with countersunk holes at both vertical ends. Gap between the bars should not be more than 125mm. All as per specification drawing as directed by Engr-in-charge. Note - (i) Glazed and Gauzed shutter both are deemed in this quoted rate (ii) Glass pane, wire mesh and grill are deemed in this quoted rate
Providing and fixing of powder coated aluminium three track sliding glazed window manufactered with approved aluminium section with three sliding shutter each shutter width one half of the length of window with the following specification a shund making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40mm x 1.5mm thick. (b) Three way track for sliding shutters of cross sections 91.80mmx 31.75mm x 1.1mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1mm (d) Aluminium glazing strip size 18.2 x 16.66 mm (e) 4mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter rollers 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window.
S&F in repairs Stain less steel brackets for suitable 25mm dia curtain rods all as specified and directed complete .
S&F 25mm dia Stainless steel curton rod fixed complete all as specified and directed.
S&F for butt hinges medium weight cold rolled mild steel 100 mm complete all as specified.
S&F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed.
S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed
S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and as directed.
M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint over a coat of primer complete all as specified and as directed.
S&F 15 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed
All as per item no. 74 above but 20 mm bore complete all as specified and directed.
S&F in repair 75 mm dia PVC (SWR) pipes single socketed fixed in walls and floors or trenches etc. complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches including taking down complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110mm bore pipe complete all as specified.
All as per Srl item No. 78 above but 75 mm bore pipe
S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal of 75 mm complete all as specified and directed
S&F in repair PVC (SWR) 75 mm single junction T equal or unequal complete all as specified and directed
S&F in repair PVC (SWR) 100 mm single junction T equal or unequal complete all as specified and directed
M&L for 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F for 100 mm CI Bends complete all as specified and directed
S&F for 100 mm CI branch pipes equal or unequal complete all as specified and directed.
S&F for 100 mm vent Cowl complete
S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and directed.
S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .
Supply and fix in repair Vitreous china urinal, bowl type, flat back, size of 465 x 355 x 265mm (minimum), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed.
S&F in repair Vitreous china urinal partition slab white of size 310 mm x 700 mm terminating about 40 cm above floor level complete all as specified and directed.
S&F in repair vitreous china wash hand basin (550x400 mm) white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F in repair PVC valveless syphonic action type Flushing cistern low level, 10 Ltr capacity with inlet ball valve,float and handle incl bracket complete all as specified and directed.
S&F 32 mm dia bore waste fittings brass chromium plated for glazed ware sink, basin etc with long screwed shank and fly nut , flange and bedded in red lead cement and other end fixed incl waste pipe of reqd length complete all as specified and as directed.
S&F in repair 15 mm bore pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair Flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern complete all as specified and directed.
Supply and fix in repair for PVC(LDPE), 32 mm dia, polythelene, of pressure rating 6 kgf/sqcm, fixed complete to wall, ceiling or in floor, for wash hand basin including taking down of existing old pipe all as specified and as directed.
S&F in repair PVC connection 15 mm dia and 450 mm long complete all as specified and as directed.
S&F in repair CP grating of size 100 mm dia with waste hole complete all as specified
Supply and fix in repair for towel Rail, brass chromium plated. 20 mm dia D type, 600 mm long between flanges complete all as specified and as directed
Supply and fix in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F in repair soap dish acrylic type complete all as specified
Supply and fix in repair for Gun metal gate valve,20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.
Dismantling of water tank and removing to store exc 250 litre but not exc 500 litres complete all as specified and directed
Supply and fix rotational moulded polyetylene water storage tanks ISI marked of 1000 litre capacity (Cylindrical vertical with closed top) with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I ,complete all as specified and as directed.
S&F in repairs 15mm dia stop valves/angle valve cast copper alloy, chromium plated, fancy type screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union complete all as specified and directed.
S&F in repairs 15mm dia Bib taps, cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and complete all as specified and directed.
S& F CP toilet paper holder complete all as specified and as directed.
S&F health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)
S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union.
S&F in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair.
S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified and directed.
S&F sheet glass 3 mm thick of ordinary quality and glazing with oil putty in square n. Exc.0.5 sqm in each pan
M&L for precast manhole covers in precast cement concrete Type B-1,1:2:4 (using 20mm graded crushed stone aggregates) set in CM 1:6.
Taking down unserviceable old existing service/ sub main wiring of any size complete all as specified and directed.
Dismantling and taking down of unserviceable distribution boards alongwith MCB TPN complete all as specified and directed.
Dismantling and taking down of unserviceable MCBs and MCB DP complete all as specified and directed.
M&L for point wiring for one light/ bell/ fan point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed.
All as per item No 118. herein before but one 3 pin socket outlet 5 Amps independent board controlled by one, one way switch.
All as per item No.118 herein before but one 3 pin socket outlet 5 Amps on the same board.
All as per item No. 118 above but with 4 Sqmm two single core and 2.5 Sqmm one single core as earth wire for 15/16 Amps socket out let, 3 pin on independent board.
S&F switch piano, flush type single pole 15/16 Amp complete all as specified and directed.
Fixing only switch piano, flush type single pole 15/16 Amp complete all as specified and directed.
S&F switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed.
Fixing only switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.
Fixing only socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5/6 and 15/16 Amp flush type complete all as specified and directed.
Fixing only socket outlet 2 in 1, 5 pin, 5/6 and 15/16 Amp flush type complete all as specified and directed.
S&F ceiling rose surface bakelite 2/3 terminal 65 x 25 mm dia poly carbonate isolated with base plate complete all as specified and directed.
Fixing only ceiling rose surface bakelite 2/3 terminal 65 x 25 mm dia poly carbonate isolated with base plate complete all as specified and directed.
S&F bell push, flush type 5 Amps white or ivory complete all as specified and directed.
S&F Call bell ding dong 230V, AC, single phase complete all as specified and directed.
S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.
Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.
S&F LED Bulb 9 Watt, cool day light 230/240V AC supply complete all as specified and directed.
S&F LED lights fitting mirror type with high output diffuser 2 feet, 10 watt 220V, AC decorative type with driver holder and LED lamp including connection with three core flexible copper conductor cable or sutaible size complete all as specified and directed.
S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core 23/0.0076 flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core 23/0.0076 flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED bulkhead light fitting 10W luminaires including LED driver holder connceting up with three core flexible copper conductor cable sutaible size complete all as specified and directed.
S&F building security light fitting complete with 35 watt LED type IP 66 pressure die cast aluminium housing and heat resistance toughened glass with frame protection and better optics for uniform distribution etc including GI pipe (light grade) mounting bracket of size 32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required complete with twin core copper conductor cable 1.5 sqmm from ceiling rose to fittings complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.
S&F MCB DB SPN, 4 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directed.
S&F MCB DB SPN, 8 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directed.
S&F MCB DB SPN, 12 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directed.
S&F 6 to 40 Amp MCB SP with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.
S&F 63 Amp MCB TPN with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.
S&F 40 Amp MCB DP with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.
Taking down exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
S&F ceiling fan 1200 mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Refixing of serviceable ceiling fan with proper checking for all fittings complete all as specified and directed.
Taking down of unserviceable 25/35/50 ltr Geysers to keep in safe custody to store and refixing with proper checking for all fittings complete all as specified and directed.
M&L for sub main wiring in PVC casing and caping of reqd size 2 x 6.0 Sqmm PVC insulated multistrand copper conductor with 1 x 4.0 Sqmm PVC insulated multistrand copper conductor as earth continuity wire complete all as specified and directed.
M&L for single pole and neutral enclosure with a two pin and earth plug and socket complte with single pole MCB 20 Amps
M&L in replacement of earthing complete with galvanished steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and incl GI earth lead wire 4mm dia by means of bolts ,nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion incl excavation and earth work in any type of strata available at site ,PCC (1:3:6)type C-1 earthing chamber ,pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GI protection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately
sidh builders
G S CONSTRUCTIONS
NOORI ELECTRIC ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .