Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance BHU | Admitted-Finance |
| 2 | Admitted-Finance GENERAL ENGINEERING WORKS THURAVOOR P O ALAPPUZHA 688 532 | ALAPPUZHA | ALAPPUZHA | KERALA | 688532 | Admitted-Finance |
Tender Value
₹6.2 L
EMD Value
₹15,602
Closing Date
3 May 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DGM (Projects)
Travancore Titanium Products Ltd, Kochuveli, Karikkakom.P.O, Trivandrum - 695 021
Construction of MCC Room for SAP Cooling Tower at TTPL
2024_TTPL_671544_1
PROJ/SAP-CT-MCC room/RK-04/24-25
Open Tender
Civil Works - Others
Item Rate
60 days
Travancore Titanium Products Ltd, Trivandrum- 21
Please refer tender documents
10 documents required · 10 mandatory
₹1,473
Yes
₹15,602
Yes
24 May 2024
11 Apr 2024
7 May 2024
11 Apr 2024
3 May 2024
11 Apr 2024
11 Apr 2024 - 3 May 2024
Amount
Construction of Control Room for Cooling Tower at the Sulphuric Acid Plant in TTPL
Clearing of Site, removal of debris and cutting of shrubs and dumping the waste materials to dump yard etc, complete as per the direction of Engineer in charge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil
Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 (1 cement : 6 coarse sand etc complete) Sufficeint no of blocks will be supplied from TTPL
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
12 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)
Back filling available earth from the TTPL Premise, from the open well area. Including cost of transportation and compaction in various stages of level below plinth level complete as per the direction of Engineer in charge
Providing and fixing factory made uPVC white colour <br>fixed glazed door - Half glazed half paneled comprising of uPVC multi-chambered frame, sash and mullion<br>(where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick<br>galvanized mild steel section made from rollforming process of required length<br>(shape & size according to uPVC profile), uPVC extruded glazing beads of<br>appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges<br>and one handle on each side of panels along with zinc plated mild steel multi<br>point locking having transmission gear, cylinder with keeps and one side key,<br>G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary<br>stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion<br>welded at all corners, mullion (if required) shall be also fusion welded including<br>drilling of holes for fixing hardware's and drainage of water etc. After fixing<br>frame the gap between frame and adjacent finished wall shall be filled with<br>weather proof silicon sealent over backer rod of required size and of approved<br>quality, all complete as per approved drawing & direction of Engineer-in-Charge.<br><br>Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance<br>in dimension i.e. in depth & width of profile shall be acceptable.<br>
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. <br>Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.<br>Two track two panels sliding window made of (big series) frame 67 x 50 mm &<br>sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing<br>bead / double glazing bead of appropriate dimension . (Area of window above<br>1.75 sqm upto 2.50 sqm).
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position all complete as per the direction of Engineer in charge.
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
Providing non- asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts, 8 mm dia G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafter and trusses), including cutting sheets to size and shape wherever required.
GANGA CIVIL ENGINEERING CONTRACTOR
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .