Construction of CHC Building at Dheera in Tehsil Dheera Distt. Kangra (HP)

Amount

Excavation in foundation, trenches etcetera in earth work in all classification of soil such as pick work, jumper work, pick jumper work, jumper blasting work, soft and hard blasting and saturated soil, dewatering including chiseling or wedging out rocks where blasting work is prohibited, or any other mixed variety of soil, including shoring, strutting, de-watering and pumping out water (Surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation as directed by the Engineer-in-Charge and then returning the stacked soil in15cm (Fifteen centimetre) layers, when required into Plinths, sides of foundation etcetera, consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth as directed inculding carriage of material within all leads, lifts and other incidental as per H.P.P.W.D Speciificaions, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, jumper work, pick, jumper work, blasting work, soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (Surface and sub soil water) upto any depth or any quantum of water including removal of slush which may arise during dewatring including dressing of sides and bed and disposing of all excavated earth in all leads and lifts and then returning the stacked soil in15cm (Fifteen centimeter) layers, when required into Plinths, and sides of foundation etcetera, consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth up to any leads, lifts, disposed material to be neatly dressed, levelled as per H.P.P.W.D Speciificaions, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidental charges. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm.(Fifteen centimetre) layers in foundation and plinths including ramming, watering and consolidating complete as per H.P.P.W.D Speciificaion, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all lead, lifts and other incidental. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders and lintels, sides and soffits of beams, haunchings, cantilevers bressumers and lintels upto all depths as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, posts and struts square, rectangular, polygonal in plan including mouldings, cornices etc; as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped, soffits, excluding landing, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slab and breaks in floors and walls under any thickness as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical fins and vertical sun breakers as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centring in all height /depth below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth as per H.P.P.W.D. specifications, approved, drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size and curing complete excluding cost of form work in foundation and plinth, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete as per H.P.P.W.D. specification approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers in all depth/ thickness upto all floor levels as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depth/ thickness upto all floor levels for all floor heights as per H.P.P.W.D. specifications, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizental fims of individually or forming box louvers and projected band as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical walls ( any thickness but not less than 0.10 (Zero decimal ten) metre thickness) including attached pilasters butteresses, plinth and string courses etcetera upto all floor levels as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying reinforcement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated including curing complte to give smooth and even surfaces including centring and shuttering etcetera but excluding the cost of reinforcement as in mouldings, cornices, windows sills etcetera not exceeding 15cm (Fifteen centimetres) in girth upto floor all levels as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/SAIL/TISCO or reinforced cement concrete work including bending, binding, cutting, straighting and placing in position including cost of binding wires complete upto all floor level as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to course) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) at plinth level in cement mortar 1:6 (One cement isto Six sand) and curing complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetres nominal size) mechanically mix including cost of form work and curing complete, as required at site as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred) or equivalent) using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Second class half brick masonry using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4(One cement isto Four sand) and curing complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Providing and fixing 50mm ( Fifty millimetre) diametre M.S. (Mild Steel) Hollow Pipe hand rail fixed with 35mm (Thirty five millimetre) diametre C.P. (Chromium Plated) Pipe balusters in combination of 35mm ( Thirty five millimetre) dia and 15/20mm ( Fifteen / Twenty millimetre) C.P. (Chromium Plated) Pipe baluster complete as per specifications, approved drawing, designs and direction of the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 40mm ( Forty millimetre) dia-metre C.P. (Chromium Plated) pipe grab bars at 78 cm height fixed with M.S. plate as per position of seat and wash basin in toilet fixed with wall and floor complete as per Architectural drawing, design and specifications.The rate is inclusive for carriage of material within all leads, lifts and other incidentals. The rate is inclusive for carriage of material within all leads, lifts and other incidentals. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing hollow M.S. (Mild steel) pipe of 50mm diameter hand rail slip resistant with round ended joint at two levels at 75 and 90cm height welded with 25mm diametre baluster embeded in cement concrete 60 C/C and jointing with electrical gas welding at top along with hand rail of hollow M.S pipe of 50mm diametre ( SWG-16) and it should be extended upto 30cms on both sides of the ramp. The baluster welded/ jointed with each with 2 Nos. M.S flat of 50x5mm complete with applying priming coat of red lead paint as per specifications, approved drawing, design and direction of the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing angle iron doors frames (Single rebate) manufactured from Mild Steel angle section of 35x35x4mm (Thirty five into thirty five into Four millimetre) and M.S. flat 50x4mm (Fifty into four millimetre) as per specifications, design and drawing including jambs, lock jambs, beeds if required angles, thrashold of M.S. angle 50x25mm (Fifty into Twenty Five millimetre) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements and shock absorbers as specified and applying coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing M.S. channels in windows frames manufactured from M.S. channel section 75x40x4mm (Seventy five into Forty into four millimetre) with M.S. flat 75x4mm (Seventy Five into Four millimetre) combination as per specifications design, drawing including hinges, jambs, beeds if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements, shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections, joints mitred and welded with16x3.15 mm (Sixteen into three decimal one five millimetre) lugs 10 cm. (Ten centimetre) long embedded in cement concrete blocks 15cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded crushed stone aggregate 20mm (Twenty millimetre) nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing 5.5mm (five decimal five millimetre) thick Modiguard or its equivalent with glazers clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all types of other taxes imposed by the Government.

Fixed steel windows

Side Hung windows

Top Hung Ventilators

Providing and fixing 19mm (Ninety millimetre) thick water proof termit resistante commercial board of Centuary/ kit ply/ Dura ply/ Marino (ISI marked) shelves cup board with hard wood edging and to be finished with mica laminatory of approved shades in shelves/Box complete including bright finished black enamelled iron butt hinges with screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 25mm ( Twenty five millimetre) thick water proof commercial board of Centuary/ kit ply/ Dura ply/ Marino for SDB fly I.S.I. Marked, shutter with 6mm thick hard wood edging and PGI 6mm thick ply backing (plain galvnised iron sheet) lining for inside of shutter including fixing with bright finished nickl plated piano hinges etcetra, complete as per specifications, detailed architectural drawings including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing Mild Steel grills 10mm x10mm (Ten millimetre into ten millimetre) square bars in combination of 20x4mm (Twenty into four millimetre) Mild Steel flat of required patterns in frames of windows etcetera with round headed bolts and nuts or by screws complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of approved shade of size 50x47mm (Fifty into forty seven millimetres) with a wall thickness of 5mm (Five millimetres) made out of extruded 5mm (Five millimetres) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. (Two Numbers) of 150mm (One hundred fifty millimetre) long brackets of 15mmx15mm (Fifteen millimetre into Fifteen millimetre) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (Ninetten millimetereinto Nineteen millimetre) M.S. square tube of 19 (Nineteen) gauge of RAJSHRI (Code No. 16.24), EPDM rubber gasket weather seal to be provided throughout the frame inculding fixing of door frame to wall with M.S. (Mild Steel) screws 100 (Hundred) long with wooden or rawl plugs emedded in masonry complete as per specifications approved drawing, designs & direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidents. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (Thirty Millimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. (Mild Steel) tubes of 19 (Ninetten) gauge thickness and size of 19mm x 19mm (Nineteen millimetre into Nineteen millimetre) for styles and 15mm x 15mm (Fifteen millimetre into Fifteen millimetre) for top & bottom rails (code No. 9.120) of RAJSHRI, M.S. Frame covered with 5mm (Five millimetre) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five) degree (Forty five degree) angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45 degree (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottomrail panelling of 5mm (Five millimetre) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the style & rails, joints mitred and jointed with solvent cement adhesive inculding fixing of PVC shutter with existing frame and M.S. butt hinges 10x50x1.90mm (Ten into Fifty into One point Ninety millimetre) size with necessary screws etcetera complete as per specification approved drawing, design including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof commercial board shutter of century/kit ply/ Marino (ISI marked) with 6mm ( Six millimetre) thick hard wood edging all round and 6mm ( Six millimetre) thick ply backing for cup board including fixing with nikel plates piano hinges with screws etcetra complete as per specifications, approved drawing, and design. The rate is inclusive for and carriage of material within all leads, lifts and other incidentals alongwith rate tax, toll tax, sales tax, GST or all type of other of taxes imposed by the Government.

Providing and fixing fly proof wire using galvanised M.S. (Mild Steel) wire gauge of I.S. gauge designation No. 85G with wire of dia 0.56mm (Zero decimal fifty six millimetre) for windows and clearstorey windows including necessary clips, screws etcetera complete as per the specifications, approved drawing, design and as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, sales tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetre) thick 2nd (second) class deodar wood panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 12 mm (Twelve millimetre) thick prelaminated water proof Particle board of Action TESA/ Century/ Kitlam/ green fly board both side BWP phenol bonded exterior/ interior grade infill panels for shutters for doors including bright finished /black enamelled iron butt hinges with necessary screws as per specifications,approved drawing, design including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing panelled glazed or panelled and glazed shutters 35 mm (Thirty five millimetre) thick both side commercial non decorative phenol bonded termite resistant and water proof cover of black board construction with 1st class frame of hard wood and well matched commercial 3 (Three) ply veneering with vertical grains of cross bends and both faces of flush door shutter with EPDM gasket (Century/ Alpro/Duro ply/Green ply ISI marked 2202 for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete as per H.P.P.W.D. specifications, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thickness glass panes of Modi Guard to door, window, ventilator shutters and partition etc. with necessary rubber beading, clips or putty complete as per the specifications, architectural drawings and the directions of Engineer-In_charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying 25 mm (Twenty five millimetre) (average) thick Kota stone slab flooring 55x55cm/55x27.5cm (Fifity five into fifty five centimetre)/ (Fifty Five into Twenty seven point five centimetre) with 7.5 cm (Seven point five centimetre) vide jaisalmer yellow band of uniform colour on 20mm ( Twenty millimetre) thick base in cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, noshing, moulding and polishing complete as per specifications, drawing, design and direction of Engineer in Charge. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying (600x600mmx10mm) double charge/ ultra charge vetrified tiles of Nitco/ Rak/ Kajaria/Johnson of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles complete including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying Epoxy PIDIPOXY -ESL- flooring of pidilite of approved shade/colour on sub floor as per specifications, approved drawing, design and as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying (300x300mmx8mm) (Three hundred into three hundred into eight millimetre) Acid resistant vetrified tiles of Johnson/Somany/ Kajaria of approved coloured of required shade in flooring treads of steps and landing laid on bed 12mm (Twelve millimetre) thick cement mortar 1:3(1 cement :3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying 300x300x25mm Precast terrazzo tiles automatic hydraulic compressed ISI marked No. IS-1237 (50% white and 50% grey cement) in white yellow, green and maroon marble chips of 0 and B size ( No. SG-403 B) of NTC laid in floors, treads of steps and landing on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete etcetera as per specifications, approved drawing, design and direction of Engineer-in-Charge, including carriage of material within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying 10mm thick antiskid water proof stain and impact resistance ceramic tiles (300x300mmx10mm) in Jaipur series (Premimum quality) of Nitco/Kajaria/Somny/Johnson of approved shade in flooring, treads of steps and landing laid over 12mm (Twelve millimetre) thick base & cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles complete as per specifications, drawing , design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and Fixing 30x30x2.5cm (Thirty into thirty into two point five centimetre) tiles Labrador design (Rainbow series) manufactured of approved shade in flooring, treads of steps, ramp and landing laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles complete as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick Baroda Green marble work (Table rubbed and polished ) in flooring, risers of steps with round nosing, moulding, polishing complete over 20 mm (Twenty millimetre) thick base in cement mortar 1:3 (one cement:three sand) including jointing with cement mortar 1:2(one white cement: Two Marble dust) with an admixture of pigment to match the shade of the marble as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge upto all floor levels including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete inter locking paver blocks with vibration technology in PVC/Fibre moulds upto M-50 grade of NTC including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

40 mm thick block

60 mm thick block

Providing and laying 30x45cm (Thirty into forty five centimetre) ceremic glazed tiles 5.5mm (Five point five millimetre) thick of Nitco/ Somany/ Kajaria/Swastic /Bell/Jhonson up to 1.50mtr. (One point five zero metre) height in skirting, risers of steps and dado on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 ( One Cement : Three Sand ) finished with flush pointing in white cement as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick 300x300mm ( three hundred into three hundred millimetre) acid resistant vetrified tiles of Johnson/ Somany/ Kajaria/Swastic /Bell up to 1.50mtr. (One point five zero metre) height in skirting, risers of steps and dado laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 ( One Cement : Three Sand ) finished with flush pointing in white cement as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, malkana, toll tax, sales tax, GST and all type of other taxes imposed by the Government.

Providng and fixing white glazed tiles 200x300/ 300x300mmx6 mm (Two hundred into three hundred / three hundred into three hundred millimetre into Six millimetre) thick Kajaria/ Swastic/ Somany/ Johnson of approved shade in skirting, risers of steps and dado upto 205cm (Two hundred five centimetre) height laid over 12 mm (Twelve millimetre) thick cement mortar 1:3 ( One cement : Three sand) and jointed with cement slurry as per specifications, approved drawing, design and as per the direction of the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, malkana, toll tax, sales tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick unistone .cladding on walls, R.C.C. surface side as on faces of Arch masonry walls etcetera on 12mm.(Twelve millimetre) thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry including scaffolding etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, malkana, toll tax, sales tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet in roofing over all steel trusses with hot dipped metalic zinc coated of TATA/ SAIL/RELIANCE/JINDAL steel (ISI marked-2120) pre-painted single skin trapezoidal profile sheeting 0.60 mm (Zero point six zero millimetrs) thickness with top coating of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns of primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with pre-painted limpet and rubber washers filled with required colour and laid complete with all accessories as required as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing pre painted steel sheet in ridges or hips having proper gola shape 60cm (sixty centimetre) overall with hot dipped metallic zinc coated of TATA / SAIL/RELIANCE/ JINDAL steel (ISI marked-2120) make over steel section, having 0.60 (Zero point six zero millimetres) thickness in roofing with top coating of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5(five) microns and primer coating of polyster to back coat of 5 (five) microns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolt and nuts 6mm (Six millimetre) diameter with pre-painted G.I. limpet and bitumen washers of required colour and shade complete with all accessories as required as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing valleys 90cm ( Ninety centimetre) overall with hot dipped metallic zinc coated TATA/ SAIL/RELIANCE/JINDAL steel (ISI marked-2120) make over steel section, pre painted sheeting 0.60mm (Zero point six zero millimetres) thickness having top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5(five) microns primer coating of polyster to back coat of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts, nuts 6mm (Six millimetre) diameter with pre-painted G.I limpet and bitumen washers of required colour and shade complete with all accessories as required as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick sheet 30cm (Thirty centimetre) wide 25cm ( Twenty five centimetre) deep plain G.I (Galvanised Iron) sheet of TATA/ SAIL / RELIANCE / JINDAL steel make U-shape gutter with iron brackets 40x3mm (Forty into three millimetre) size, bolts, nuts and washers etcetera including making necessary connections with rain water pipe as per design upto all floor level complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing M.S (Mild Steel) black plain iron sheet 2.00mm (Two point zero millimetre) thick in facia/eaves board /soffits/ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per H.P.P.W.D. specifications, approved drawing, design and as per direction by the Engineer-in-Charge, (base members of steel work shall be measured and paid for saperately) including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) diameters pipe on wall face P.V.C. (Polyvinyl chloride) Rain water pipe class "B" housing not less then 6 kg/sqcm ( Six kilogam/ per square centimetre) working pressure of ISI marked of Finolex/ Relpipe ( Reliance) /Vectus D-plast high density pipe for rain water pipes conforming to IS:A985-2000 fixed with approved adhesive inculding filling the joints complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (Polyvinyl chloride) acessories of Finolex/Redpipe Reliance /Vectus for Rain water pipes having not less then 6 Kg/cm (Six Kilogram per square centimetre) superime working pressure class B P.V.C. (Polyvinyl chloride) D-plast high density pipe conforming to IS 4985-2000 for rain water pipes fixed with approved adhesive including filling the joints complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Plain Bend 150mm (One hundred fifty millimetre)

Plain Shoe 150mm (One hundred fifty millimetre)

Providing and fixing M.S (Mild Steel) holder bat clamps of approved design to HDP (High dentisity presure) rain water pipe embedded in cement concrete blocks 10x10x10cm (Ten into ten into ten centimetre) of 1:2:4(1 cement: 2 sand: 4 graded crushed stone aggregate 20mm (Twenty millimetre) nominal size and inculding cost of cutting holes and making good the walls etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing flashing 38cm. (Thirty eight centimetre) overall in plain Galvanised iron sheet 1.25mm (One decimal two five millimetre) thick sheet TATA/SAIL/RELIANCE/JINDAL steel fixed with galvanised iron. J or L hooks, bolts and nuts, Galvanised iron limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (1 cement : 3 sand) complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Steel work of TATA/SAIL/TISCO welded in built up sections in trusses and trussed purlins in building work including cutting, hoisting fixing in position and applying a coat of red lead paint complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering above plinth level to all floor levels including arises, internal rounded angles, chamfers and rounded angles of any girth and finished even and smooth with cement mortar 1:6 (1 cement: 6 sand) complete as per H.P.P.W.D. specifications, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering above plinth levels to all floor levels including arises, internal rounded angles, chamfers and rounded angles of any girth and finished even and smooth with cement mortar 1:6 (1 cement: 6 sand) complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for exterior plastering above plinth level to all floor levels including arises, internal rounded angles, chamfers and rounded angles of any girth and finished even and smooth with cement mortar 1:5 (1 cement: 5 sand) complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (1 cement: 3 sand) complete all height above plinth level to floor all level as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Applying priming coat of Asian/Nerolac suraksha paint over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papering complete with ready mixed priming paint brushing red lead, Red-oxide/ zinc oxide chrome including carriage of material within all leads, lifts and other incidentals. The rate is inclusive octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) with Nerolac Suraksha/ Asian paint on new steel and other metal surfaces with brushing to give an even shade including cleaning the surfaces free from all dirt, dust and other foreign matters paint other than white complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac Surksha/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) with Nerolac Suraksha/Asian surkasha paints over new wood and wood based surfaces with synthetic paint brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matters sand papering and stoping with enamel paint other than white complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Wall painting (two coats) with acrylic washable emulsion of Asian/Nerolac paints of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matters and sand papering smooth including applying of putty as required for making the surface smooth complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Finishing wall with apex weather proof exterior grade emulsion of approved (Asian paints or Nerolac surksha) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matters etcetera including sand papering smooth complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Distempering (two coats) with dry distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade including a priming coat of whiting after thoroughly brushing the surface free from mortar droppings & other foreign matters and also preparing the surface even and sand papering smooth including primer coat with distemper primer complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Wall painting (Two coats) with epoxy paint of Pidilight upto any height of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papering smooth including applying of putty as required for making the surface smooth inculding carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

White washing with lime on undecorated wall surfaces (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar droppings and other foreign matters as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing Cement concrete Jali 25mm (Twenty five millimetre) thick complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing10cm (Ten Centimetre) dia M.S. Pipe (Conforming to IS - 1239 of Jindal (Medium Class) post embedded in cement concrete base complete as per architectural drawings, specification design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing M.S brackets of 50x50mm and 20x20mm (Fifty into fifty millimetre and twenty into twenty millimetre) hollow pipe M.S (Mild Steel) section alongwith 12mm solid square bars in combination complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing cup-board shutter magnetic catcher with necessary screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into thirty five millimetre) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetera complete (Indian make of approved quality) as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing oxidized M.S (Mild Steel) sliding door bolts bright finished or black enameled with nuts and screws etcetera as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

300x16mm (Three hundred into sixteen millimetre)

250x16mm (Two hundred fifty into sixteen millimetre)

Providing and fixing oxidized M.S (Mild Steel) tower bolts Barrel type bright finished or black enameled with nuts and screws etcetera as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

200x10mm (Two hundred into ten millimetre)

150x10mm (One hundred fifty into ten millimetre)

Providing and fixing oxidized M.S (Mild Steel) Handles bright finished or black enameled with nuts and screws etcetera as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and fixing 200mm (Two Hundred millimetre) oxidized M.S (Mild Steel) Hooks and eyes with nuts and screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 100mm (Hundred millimetre) oxidized M.S (Mild Steel) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing Grab Bar chromium plated 40/50mm ( Forty/ fifty millimetres) diametre CP Pipe fixed with wall at 78cm (Seventy eight centimetres) height with M.S (Mild Steel) plates as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and laying to level or slope half round 23cm (Twenty three centimetre) dia stone ware pipe with 1:3:6 (1 cement: 3 sand: 6 graded crushed stone aggregate 20mm (Twenty millimetre nominal size) cement concrete for bedding complete including testing the joint to plinth protection complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene) (P.E. AL P.E) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 (Fifteen thousand four hundred fifty-Two thousand four) for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work) pipes exposed on wall, including filling the joints with approved adhesive complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

1620 (20mm ( twenty millimetres) O.D (Outer Diameter) pipe

2025mm (25mm (Twenty five millimetres) O.D (Outer Diameter)

Making connection of galvanized mild steel distribution branch with galvanized M.S. (Mild steel) main 20mm to 40mm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing high presure P.V.C. (Polyvinyl chloride) Supreme/ Kishan/ Astral or equivalent pipe class "A" soiln waste and ventilating pipes conforming to B.S No.-13592 fixing with adhesive mixure complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter 2.7mm (two point seven millimetre) thick pipe.

75mm (Seventy five millimetres) diameter 2.2mm (two point two millimetre) thick pipe.

Providing and fixing P.V.C. (Polyvinyl chloride) holder bat clamps including steel bolts to cast PVC pipes embedded in cement concrete blocks 100x100x100mm (One hundred into One hundred into One hundred millimetres) of 1:2:4 mix (One cement :Two sand :Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) including cost of cutting holes and making good the walls as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter

75mm (Seventy five millimetres) diameter

Providing and fixing P.V.C. (Polyvinyl chloride) Supreme/ Kishan/ Astral pipe fittings and accessories for sewerage pipe conform to IS No. 14735-99 plain bend complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter.

75mm (Seventy five millimetres) diameter.

Providing and fixing P.V.C. (Polyvinyl chloride) Tee of Supreme/ Kishan/ Astral plain tee I.S.I marked conforming to IS.No.14735-99 includig fixing with approved adhesive etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter.

75mm (Seventy five millimetres) diameter.

Providing and fixing P.V.C. (Polyvinyl chloride) heal rest of Supreme/ Kishan/ Astral ISI marked confirming to IS No. 14735-99 including filling the joints with approved adhesive complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter.

75mm (Seventy five millimetres) diameter.

Providing and fixing P.V.C. (Polyvinyl chloride) collar of Supreme/ Kishan/ Astral I.S.I marked conforming to IS No.14735-100 including fixing with approved adheasive complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter.

75mm (Seventy five millimetres) diameter.

Providing and fixing P.V.C. (Polyvinyl chloride) Cowl of Supreme/ Kishan/ Astral complete I.S.I marked conforming to IS No.14735-99 including fixing with approved adhesive complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

110mm (One hundred ten millimetres) diameter.

75mm (Seventy five millimetres) diameter.

Providing and fixing 110x90mm (One hundred ten into ninety millimetres) nominal size/diameter P.V.C. (Polyvinyl chloride) floor trap of Supreme/ Kishan/ Astral ISI marked conforming to IS No.14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good walls and floors complete, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 110x75mm (One hundred ten into seventy five millimetres) nominal size/diameter P.V.C. (Polyvinyl chloride) Floor trap of Supreme/ Kishan/ Astral ISI marked conforming to IS No..14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good walls and floors complete, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china Cera / Hindware/Jaquar of star white /snow white shade or equivalent wash down water closet squatting pan ( ORRISA TYPE Star -S-No. 20090 of size 53x41cm (Fifty three into forty one centimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) of Star S- No. 20087(S-10) of size 57x35x39cm of Cera / Hindware/Jaquar of star white /snow white shade with integral 'P'or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) (Seat and over to be measured and paid for separately):- as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) of matrix No.20087 (5-10) of size 57x35x39cm of Hindware/ Cero with integral 'P'or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) (Seat and over to bemeasured and paid for separately):-as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten Letres) capacity P.V.C. (Polyvinyl chloride) saleek plus low level flushing cistern of Cera/Hindware/Jaguar of star white snow white shade with a pair of C.I. (Cast iron) or Mild Steel brackets with fittings such as lead valve less siphon, 15mm (Fifteen millimetres) nominal size brass ball valve with polythene float, C.P. (Chromium plate) brass handles, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty millimetres) diameter C.P. (Chromium plate) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet as per specifications, approval drawings, design ( seat and over flow pipe to be measured and paid for separately) as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten Litres) capacity P.V.C. (Polyvinyl chloride) low level flushing cistern Cera/Hindware/Jaguar of star white snow shade with a pair of C.I. (Cast iron) or Mild Steel brackets with fittings such as lead valve less siphon, 15mm (Fifteen millimetres) nominal size brass ball valve with polythene float, C.P. (Chromium plated) brass handles, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty millimetres) diameter C.P. (Chromium plate) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( seat and over flow pipe to be measured and paid for separately) as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) size sand cast iron P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) as per specification, drawing, design and entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal bore C.P. (Chromium plated) brass waste and plug for glazed wear sink wash basin etcetera with long screwed shank fly nut and fixed to steel pipe including vurcanite plug brass chain and stud complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing plastic seat Solid type black or white and cover for wash down water closet with C.P. (Chromium plate) brass hinges and rubber buffers matching with shade of European W.C. pan as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china wash basin of Cera / Hindware size 580mmx430mm ( Five hundred Eighty millimetre into four hundred thirty millimetre) of star white/ snow white shade No-10008 (Ten thousand eight) with single hole for pillar tap with C.I. (Cast iron) or Mild Steel brackets painted white including cutting holes and making good the same with pedestal but excluding fittings as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china wash basin of Cera / Hindware 550mmx400mm ( Five hundred Fifty millimetre into four hundred millimetre) of star white shade Delta No-10010 (Ten thousand Ten) with single hole for pillar tap with C.I. (Cast iron) or Mild Steel brackets painted white including cutting holes and making good the same with pedestal but excluding fittings as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china matrix wash basin of Cera / Hindware No.10010 of size 550x400mm ( Five hundred Fifty millimetre into four hundred millimetre) with single hole for pillar tap with C.I. (Cast iron) or Mild Steel brackets painted white including cutting holes and making good the same but excluding fittings as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china urinal flat back of Hindware/ Cera /Jaguar of star white /snow white shade of size 390x375x590mm ( Three hundred ninety into three hundred seventy five into five hundred ninety millimetre) No. 60002 (Sixty thousand two) including connector the urinal with waste to be by the means of white lead mixed with chopped lamp as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of Cera/Hindware/Jaguar for wash basin complete recessed at the back for the reception of pipes and fittings complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 32mm dia (Thirty two millimetres diameter) nominal size rubber plug for sink, wash basin complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diameter M.I. union of JAl/ESS ESS/Jaguar for wash basin or sink.complete, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diameter P.V.C. (Polyvinyl chloride) waste pipe of Jal/ EES/ Jaquar of continental Series of Hindware for wash basin or sink complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diameter C.P. (Chromium plated) Grating of Jal/ ESS ESS/Jaquar of continental series of Hindware for gully floor or Nahni trap complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of superior glass mounted on 6mm (Six millimetres) thick A.C. (Asbestos cement) sheet or ply wood sheet and fixed to wooden plugs with C.P. (Chromium plated) brass screws and washers complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. (Chromium plated) Brass Towel rail of Jal/ESS ESS/ Jaquar of continental series of Hindware with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P. (Chromium plated) brass screws complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf of Jal/ESS ESS/ Jaquar of continental series of Hindware with C.P. (Chromium plated) Brass brackets and guard rail complete fixed to wooden plugs with C.P. (Chromium plated) brass screws complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing C.P. (Chromium plated) brass toilet paper holder of Jal/ESS ESS/ Jaquar of continental series of Hindware as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing PTMT (Polytera methylene Terephthalate) jet spray of Jal/ESS ESS/ Jaquar approved quality and colour with one metre tube complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials.The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore PTMT (Polytera methylene Terephthalate) push cock tap of Jal/ESS ESS/ Jaquar, complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated brass (ISI marked IS NO. 8931 ( Eight thousand nine hundred thirty one) bib tap of Jal/ESS ESS/ Jaquar, complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. (Chromium plated) brass stop cocks conforming to IS 8931 (Eight thousand nine hundred thirty one) of Jal/ESS ESS/Jaquar, complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. (Chromium plated) brass pillar tap with capstan head conforming to IS: 8931(Eight thousand nine hundred thirty one) of Jal/ESS ESS/ Jaquar, complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing C.P. (Chromium plated) brass angle valve of Jal/ESS ESS conforming to IS: 8931 (Eight thousand nine hundred thirty one) as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

15mm (Fifteen millimetres) diameter.

20mm (Twenty millimetres) diameter.

Providing and fixing 15mm (Fifteen millimetres) nominal bore brass ball valve of Jal/ESS ESS (Horizontal plunger type) high pressure with copper plate complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore P.V.C. (Polyvinyl chloride) connection pipe with brass union 45cm (Forty five Centimetres) length as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing, placing water storage tank of I.S.I marked : 12701 (Twelve thousand seven hundred one) make P.V.C. (Polyvinyl chloride) SINTEX Triple layer having capacity of 2000 (Twothousand) litres each tank with necessary fittings including over flow pipe, scour pipe etcetera and pads required for G.I (Galvanised iron) in-let and out -let connection and 15mm (Fifteen millimetre) bore ball valve with mosquito proof P.V.C. (Polyvinyl chloride) cover and locking arrangements complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 160mm (One hundred sixty millimetres) nominal bore/diameter to level or slopes P.V.C. (Polyvinyl chloride) pipe line including jointing with approved adhesive including testing of pipe and joint complete, as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One Cement isto Five Sand istoTen graded crushedstone aggregate 40mm (Forty millimetres) nominal size bedding for 160mm (one hundred sixty millimetre) diametre pipe necessary form work and curing complete as per H.P.P.W.D. specifications, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing (P.E.- A.L-P.E) Polythene aluminium polythene composite end seal compression fittings as per IS: 15450-2004 (Fifteen thousand four hundred fifty- two thousand four) for water supply e.g ( for example) Tees, Elbows, reducers Thread socket and connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the wall etcetera, complete and as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Kitec Equal Tee 1216mm (One thousand two hundred sixteen millimetres) size .

Kitec Female branch Tee 1216x1216x15mm (One thousand two hundred sixteen into One thousand two hundred sixteen into Fifteen millimetres) size .

Kitec Female Elbow 1216x15mm (One thousand two hundred sixteen into Fifteen millimetres) size

Kitec Male thread Connector 1216x15mm (One thousand two hundred sixteen into Fifteen millimetres) size

Kitec Female thread Connector 1216x15mm (One thousand two hundred sixteen into Fifteen millimetres) size .

Construction of manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty millimetres) nominal size foundation concrete 1:4:8(One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm (Forty millimetres nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty millimetres) nominal size finished smooth complete including curing and testing Inside size 800x800mm (Eight hundred into Eight hundred millimetres) and 500mm (Five hundred millimetres) deep, including C.I. (Cast iron) cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Construction of manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8(One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size finished smooth complete including curing and testing Inside size 800x800mm (Eight hundred into Eight hundred millimetres) 1000mm(One thousand millimetres) deep, including C.I. (Cast iron) cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions Total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rates is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. (Cast iron) inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement isto Five sand) C.I. (Cast iron) cover with frame (light duty) 355x610mm(Three hundred fifty five into Six hundred ten millimetres)internal dimensions total weight of cover with frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC (Reinforced cement concrete) top slab with 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size foundation concrete 1:5:10 (One cement isto Five sand isto Ten graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size inside plastering 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement isto three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty millimetres) deep as per approved drawing, design as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing vitreous china laboratory sink of size 60x45x25 cm (Sixty Eight into forty five into twenty five centimetre) with C.I. (Cast iron) or Mild Steel brackets painted white including cutting holes in walls and making good the same but excluding fitting complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing Vitreous China Division Plate for Urinals l600x300mm (Six Hundred into three hundred millimetre) of hind ware / cera/ Jaquar of star white/snow white shade as per direction of Enginner in charge, inculding carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing, laying (to level or slope) PVC (Polyvinyl Chloride) pipe of grade 'A' and jointing with 150mm (One hundred fifty millimetre) central diameter pipe and forming with approved adhesive including testing of pipes and joints complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

Providing and fixing 20mm ( Twenty millimetre) nominal bore to wall ceiling and floor galvanised mild steel tube ( medium grade ) to be fixed with clamps inculding making good the walls, ceiling and floor complete including carriage of material within all leads, lifts of material and other incidentals.The rate is including octroi, royality, Malkana, toll tax, sales tax, GST or all type of other taxes imposed by the Government.

M/S BALDEV KUMAR GOVT. CONTRACTOR