ADDN/ALTN TO MES OFFICER MESS AT VSN CHILODA, PROVN OF VIEW CUTTER AT P-190, ADDN/ALTN TO FIRE SECTION AT HQ SWAC, ADDN/ ALTN OF BLDG NO P-43 AND P-232 AT VSN CHILODA AND PROVN/REPLACEMENT OF OVERHEAD WATER TANK AT VARIOUS PLACES AT VSN CHILODA

Amount

Taking down chowkhats or frames with shutters ( without taking down shutters from the frame) of size not exceeding 1.5 Square Meter each and removing from site complete all as specified. (The distrubed surface during taking down shall be made good by the contractor withot any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface) complete all as specified and directed.

Taking down door shutters of any description area exc 1.00 sqm and not exc 2.00 sqm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster or cement lime plaster any description on bricks on stone walls etc incl racking out joints, hacking for key complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and directed.

M&L for Cutting chases, pinning through brick wall in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for 2nd class HW plain fillets Plain fillets square,rectangular or triangular in section, clean sawn, secured with scews exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed.

M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauze divided in to squares with plain, chamfered mitred and rebated sash bars, any number etc (without sash bar) complete all as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and directed.

S&F 30mm thick, flush shutters, soild core construction, with block board core and plywood face panels commerical type both faces is covered with decorative face veneer with lipping/frame to match and complete all as specified & directed.

S&F Solid PVC Single Moulded door frame of size 50mm x 95mm made but single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with MS tube, supplying and fixing in opening as per pecification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

S&F 200mm extruded brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 300 mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 200mm extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F 100mm Stainless handles polished complete all as specified and as directed.

S & F cast brass Screw eye 10 to 12 mm internal dia and fixed complete all as specified & directed.

S&F 150mm floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F for aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Stainless Steel wire cloth 0.36 mm nominal dia of wire cloth and average width of aperture 1.40 mm & fixed with stainless steel wire staples, complete all as specified & directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Supply and fixing factory made aluminium powder coated Three track sliding window (Domal series 27"x 65") with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto any height, comprising of frame 75mmx45mm*1.40mm thick with inbuilt roller track and shutter frame of size 27mmx65mm*1.40mm thick incl glazing beads and interlocks, EPDM gasket, wool pile, zinc alloy (aluminium powder coated) lockpads, zinc alloy body with single nylon rollers, G.I fasteners for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Wiremesh & glass does not paid separately. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: Refer TD Drg CEAG/AR/TD/06R (SHEET 1/7 TO 7/7)

S&F in repair 25 mm dia stainless steel rod drapery rod cut to size and fixed in position, including all fitting, fancy globes at both ends complete all as specified and as directed by Engineer-in-Charge.

S & F framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered` and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed by Engr-in-Charge. .

M&L for Glazed ceramic coloured tiles in vertical surface of size 450mmX 300mmX 7mm / 600mmx300mmx7mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M&L Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles) 300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles. (The Colour, shade and pattern shall be approved by the GE during execution work). (No extra cost is allowed for Removing and re-fixing and necessary cutting of door etc if any during execution of work) complete all as specified and directed.

M&L for rendering 5mm thick on concrete surface in CM 1:3 finished even smooth without using extra cement complete all as specified and directed by Engr -in-Charge.

M&L for rendering 10mm thick on brick work or concrete roof surface in CM 1:4 complete all as specified and directed by Engr -in-Charge.

M & L for Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in Cm 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound.

S&F 5.5mm thick tinted toughened glass as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) of size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified and directed.

S&F 18 mm thick PVC Sheet one side prelaminated of approved texture as in cabinet with shelves and partitions including required beading and accessory auto close hinges, magnetic catch lock, SS handle/ Profile complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of wall care putty by finishing the surfaces even and smooth and one coat of primer, complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F Door seal aluminium plate with nylon brush ivory matt having width 6cm colour ivory, matt finishing, material metal with brush incl screw for fixing n exc 1.2m etc complete all as specified and directed.

S & F SS Peg set of six including fixing to wall (cloth hanger) etc complete all as specified and directed.

Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 20 mm bore with all fittings like socket, union, elbow, bend, tees,, reduced, etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repair PVC (SWR) floor trap , plain including jointing with solvent cement 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) multi floor trap including jointing with solvent cement 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) pipes 50mm single socketed, in any length with rubber ring joints fixed to walls /floor complete including dismantling existing pipes complete all as specified and directed.

S&F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls complete including dismantling existing pipes complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints, fixed to walls complete including dismantling existing pipes of any description complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm complete all as specified and directed.

S&F in repair PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified and directed.

S&F in repair PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

S&F in repair PVC (SWR) juncton single (single T ) equal or un equal with access door 75 mm complete all as specified and directed.

S&F in repair PVC (SWR) juncton single (single T ) equal or un equal with access door 110mm complete all as specified and directed.

S&F SS Auto lock hinges 100mm with necessary fittings complete all as specified and directed.

S & F aluminium powder coated (min thickness of powder coating 50 micron of approved colour) ventilator, rectangular frame of size 100mm x 50mm x 1.50mm thick, half portion glazed with 5mm thick frosted glass including rubber beading and glazing clip & half portion with louveres of 100mm wide and 5mm thick plain toughened glass including rectangular frame of size 25mm x 50mm x 1.50mm thick for fixing SS wire gauze for fixing of 0.36mm dia and 1.40 width aperturer with screw to upper half portion of ventilitor including Wiremesh & glass does not paid separately complete all as specified and directed. [As mentioned in fig ALP FVL5 of TD drg Sheet 2/7] Note: Refer TD Drg CEAG/AR/TD/06R (SHEET 1/7 TO 7/7)

S&F in repairs Chromium plated 15 mm bore Single lever basin Mixer with 315mm extended body and 600mm braided connection pipe (without pop up) as approved complete all as specified and directed. (Make : Cera Cat No. F2013452 or equivalent as approved by GE.)

S&F in repairs Chromium plated 15 mm bore Angular cock with wall flange 15 mm dia as approved complete all as specified and directed. (Make : Cera Cat Part No. QT F2013201 or equivalent as approved by GE.)

S&F in repairs Hand shower (health faucet) ABS body with 1.0mtr SS braided connection long pipe with wall hook complete all as specified and directed. (Make : Cera Cat Part No. F8030108AB or equivalent as approved by GE.)

S&F in repairs SS 304 Soap dish holder complete all as specified and directed. Make : Cera Cat part No F5003106 or equivalent as approved by GE.)

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with side handle, wall flange and aerator, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed. Make : Cera Cat Part No F20113163 or equivalent as approved by GE.)

S & F in repairs Stainless steel Grade 304 towel rail of lenth 600mm long complete all as specified and directed. (Make : Cera Cat Part No. F5003103 or equivalent as approved by GE.)

S&F in repair Vitreous china thin rim table top wash basin (Snow White) of size 505mm x 385mm x 135mm & all necessary fitting complete all as specified and directed. (Make : Cera Cat part No A2020103 or equivalent as approved by GE.)

S & F in repairs Stainless steel Gd 304 towel ring fixing complete all as specified and directed. (Make : Cera Cat Part No. F5003105 or equivalent as approved by GE.)

S & F in repairs for wall mixer 3-in-1 system with arrangement for both telephonic hand shower and over head shower composite with bend pipe connecting legs & wall flanges (Make : Cera Cat No F2013403 or equivalent as approved by GE.), Hand shower of size 100X55mm with 130mm long arm (Make : Cera Cat No F7030101AB or equivalent as approved by GE), Wall hook and 1.50 Metre SS hose (Make : Cat No F8070401 or equivalent as approved by GE.), Overhead rain shower square 200x200mm (Make : Cat No F7010507AB or equivalent as approved by GE.) SS overhead shower arm of length 380 mm with wall flange (Make : Cat No F7040105 or equivalent as approved by GE.) complete all as specified and directed.

Supply and fixed in repairs vitreous china wash down single piece WC floor mounted of size 670x365x735 with slim softclose seat cover including 'S' trap 300mm fixing complete with white cement complete all as specified and directed. (Make-Cera Cat Part No. S1013222VS or equivalent as approved by GE.)

S&F in repairs Stainless steel square grating doom 150x150mm complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed.

S & F in repairs Tumbler holder of Stainless steel Gd 304 complete all as specified and directed. (Make Cera Cat Part No. F5003117 or equivalent as approved by GE.)

S & F in repairs Soap dispenser Stainless steel Gd 304 complete all as specified and directed. (Make Cera Cat Part No. F5003111 or equivalent as approved by GE.)

S & F in repairs toilet paper holder with flap guard of Stainless steel Gd 304 complete all as specified and directed. (Make Cera Cat Part No. F5015110CH or equivalent as approved by GE.)

M&L for 12mm thick prelaminated both sides medium density fibre board, fixed to timber frame work with screws complete all as specified and as directed by Engr-in-Charge.

S&F in repair brass chromium plated bottle traps 300mm for wash basins/urinal with inlet and outlet screwed for pipe or connections including SS 32mm Waste coupling full thread with necessary packing, union and cap and fixed complete all as specified and directed. (Make : Cera F8060401 or Equivalent or equivalent as approved by GE.)

M&L for Preparing new surfaces of wood and wood based materials, and priming with pink primer and applying two coat of synthetic enamel paint, complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel or iron surfaces of any description over over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for decorative grill with GI Square pipe of dimension 25*25*1.2mm thick in frames & the surfaced to be finished with powder coating with 60 microns thickness, 14 mm square MS rods in Horizontal portion in the openings with frame shall be provided at equal distances. Frame of grill to be fixed with holdfast and metal caps provided for horiztal members complete all as specified and directed. Note : Refer TD Drg CEAG/AR/TD/06R (SHEET 1/7 TO 7/7)

Excavating in post holes (or similar holes) n.exc 0.5 cum getting out, returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

M&L for providing cement concrete 1:2:4, type B2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F for mild steel plates (plain or chequered) of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed .

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe-410-W (Gde- E-250) quality-B complete all as specified and directed.

S&F Fibre glass reinforced translucent sheeting 2mm thick fixed with two corrugations side lap and washer in roof, wall etc. fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge.

Dismantling and taking down existing water proofing treatment with plastering surfaces of any description and any thickness and removing debris (dismantled materials) outside MD land and cleaning properly the site etc complete all as specified and directed.

Material and labour for 15mm thick rendering /screed in cement mortar (1:3) on roof slab including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparing clean and dried plaster surface and applying a coat of cold applied bituminous primer @ 0.40 ltr per sqm, applied over primed surface APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, torching with overlaps as recommended by the manufacturer complete all as specified and as directed by Engineer-in-charge.

M&L for 40 mm thick plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in padding complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 in roof kerbs or mud stops,gola, rounded or chamfered on edges complete all as specified and directed.

M&L 12 mm thick prelaminated partical board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work or inserted in aluminium frame work complete all as specified and directed.

S&F powder coated, any colour, aluminum door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with including taking down of door and refixing the same complete all as specified and directed.

M&L for aluminium powder coating (powder coated of required colour) three track sliding windows frame top and sides of size 92x31.75x1.5mm (section No 20831), bottom size 92x31.75x1.5mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737) with rubber gasket beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperature and fixed with stainless steel wire staples and fixing 5mm thick glass (plain/tinted/with laminated film) with necessary rubber beading gasket etc complete all as specified and as directed.

M&L for Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Aluminium handle cast type anodized 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodized barrel tower bolt of extruded section and fixed 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in cement mortar 1:6 complete all as specified and directed.

S & F in repairs aluminium power coated (min thickness of powder coating 50 micron of approved colour ) ventilator ,partially glazed and partially louvers ,outer frame and mullion fabricated with aluminium section of size 82.50mm X 38 mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick froasted glass including aluminium louver patti including SS wire gauge for fixing of 0.36mm dia and 1.40mm width aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting and fixture and fixed in position complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces prepara-tory to distempering on wall surfaces complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 20 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debries to a distance exc 1.5 Km but not exc 2 Km complete all as specified and directed.

M&L 25 mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors levelling for tiles complete all as specified and directed by Engineer -in-charge.

M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (40mm graded aggregate) in flooring and similar works complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed.

Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fitting sand fixed to wall complete all as specified and directed.

Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.

Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed(pressure rating not less than 4kg/sqcm) in any length with rubber ring joints laid in trenches or in floors fixed with and including PVC clamps, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed(pressure rating not less than 4kg/sqcm) in any length with rubber ring joints laid in trenches or in floors fixed with and including PVC clamps, complete all as specified and directed.

S&F 40mm PVC (SWR) pipes, single socketed in any length with rubber ring joints with adhesive solvent fixed to wall or floor as in urinal/ WHB waste water line and similar works etc complete all as specified and directed.

Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bends (any radius) suitable for 40mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.

M & L PVC (SWR) multi floor trap 75mm/100mm with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge.

Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with or without access door complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with or without access door complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 40mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device including brass chromium plated jet shower with one meter long flexible pipe complete all as specified and directed by Engineer-in-Charge.

S & F PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.

S&F urinals with fixing accessories of size 375mmx390mmx590mm complete all as specified and directed. Make : Cera Cat part No S4020112 or equivalent as approved by GE.

S&F in urinal spreader of chromium plated of any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F in repair vitreous china,white wash hand basin of size 630 x 450 x 225mm with half pedestal height 585mm complete all as specified and directed by Engineer-in-Charge. (Make : Cera WHB Cat Part No. - S2040104 & Pedestal Cat Part No. S2090103 or equivalent as approved by GE.)

S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed.

S&F in repairs 15 mm size pillar cock with swan neck spout(Left / right) and aerator fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. (Make : CERA Cat part No F2014104 or equivalent as approved by GE.)

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair towel ring with stainless steel wall flange complete all as specified and directed. (Make : CERA Cat part No F5013115CH or Equivalent as approved by GE).

S&F in repair urinal partition with frosted glass 10mm chrome finish of size 900mm x 450mm complete all as specified and directed (Make : CERA Cat part No S4090105 or Equivalent as approved by GE).

S&F in repair soap dish (Glass) holder with wall flange complete all as specified and directed. (Make : CERA Cat part No F5013116CH or Equivalent as approved by GE).

S&F in 15 mm size two way bib cock with single handle and wall flange cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed. (Make : Cat part No F2002163 of CERA or Equivalent as approved by GE).

S&F in repairs 20 mm dia decorative aluminium anodised powder coated tubular curtain rod including brackets, knobs, end stops fixing with screw/ nails etc complete all as specified and directed.

S&F in repairs 15 mm size stop valve with long shank (concealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated shower rose 125 mm dia with swivel joints, fixed in position complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engineer-in-Charge.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing of new surfaces of ceiling and applying two coats of whitewash over a coat of putty complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and as directed.

M&L for RCC nominal mix using 20 mm aggregates in beams,foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete all as specified and directed by Engineer-in-Charge.

M&L for Form work to sides and soffits of floor or roof beams, lintels, cantilevers plinth beams;and similar work; vertical or to batter pillars etc complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC nominal mix using 20 mm aggregates in beams, cantilevers, lintels over 1.5 M span complete all as specified and as directed by Engineer-in-Charge.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified directed by Engineer-in-Charge.

All as item No 152 here in before but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders dia complete all as specified directed by Engineer-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment including 15 mm thick cement screed bed in CM 1:6 complete to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105 x 60 mm complete all as specified and as directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and as directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and as directed.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with 8 to 10 ton roller compacted complete all as specified and directed by Engr-in-charge

M & L for Plain Cement concrete 75mm thick type D-2, 1:4:8 (40mm graded ggregate)as in floors complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick plain cement concrete (1:2:4) type B1 (using 12.5 mm graded stone aggregates) as in flooring in leveling course, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for light shade colour vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square/ rectangular) polished area of each tile 350x 250x 7 mm/ 450X 350X 7mm as in skirting/ dado etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge.

S&F cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

M&L for cutting holes into or through stone/pcc block wall built cm. and making good in cm 1;3 or PCC type B-1 on required. Superficial area exc 150 sq.cm but 400 sq cm complete all as specified and as directed.

S&F brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and as directed by Engr-in-charge.

S&F 15mm bore bib tap fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed.

S&F Swan neck Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

Supply and fix white vitreous China wash hand basin table top (Flat back) of size 700 x 435 x 135 mm fixed on and including new brackets complete screwed down high Pressure, screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete all as specified and as directed.

S&F Vitreous China urinals,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. Make : CERA Cat No. S40220101 or equivalent as approved by GE

M&L for ATT along the external/ internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for mild steel Framed brackets & similar work of angles, flat iron or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles,fixing with holdfast complete as necessary conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

S&F false ceiling with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edgeD GRG false ceiling tiles at all heights with GRG ( Glass reinforced gypsum ) false ceiling tiles of size 595 x 595 mm of approved texture, designs and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRCO .5 to .75 as per IS 8225:1987 non combustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

S&F 2000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc complete all as specified and as directed.

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 25 mm dia complete all as specified and as directed.

S&F 25 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed by Engineer - in - Charge .

Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:2:4) type B-1 (20mm graded aggregate) in flooring,tank staging and similar works complete all as specified and directed.

S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and as directed by Engineer-in-Charge.

M&L providing cement concrete 1 :2 :4 type B1 using 20mm graded stone aggregates as in lintels upto 1.5 m clear span cills , seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railing up to 60 cm in height, copings, kneelers, apex stones bed plates kerbs and water troughs including weathering, slightly rounded or chamfered angles complete all as specified and as directed by Engr-in-Charge.

S&F 250mm long Mild steel sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and as directed.

S & F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x 605mm complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed.

S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed by Engineer - in - Charge.

M & L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-charge.

S&F 150mm brass handles, fabricated type and polished complete all as specified and directed.

S&F 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 250mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

M& L two coat of oil bound distemper on Preparaion plastered or unplasterd surfaces over a coat of alkali resistance primer on vertical surfaces of walls and the like complete all as specified and directed.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M & L 3mm thick wall care putty on wall complete all as specified and directed.

Taking down carefully copper/ aluminum point wiring (light, fan, socket, power and bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder, regulators, sockets light fittings etc, removing material to store for keeping in safe custody or for taking credit, and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge for the following. (i) One light/bell/fan point contrlloed by one switch

All as per item No 200 here in before but One 3 pin socket out let 5 Amps on the independent board.

All as per item No 200 here in before but one 3 Pin socket out let 5 Amps on the same board.

All as per item No 200 here in before but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps complete all as specified and directed by Eng-In-Charge.

S&F in replacement Modular switch one way 6A,1 Module, complete all as specified and directed by Eng-In-Charge.

S&F in replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge.

S&F in Modular switch one way 16A,1 Module, As per existing complete all as specified and directed by Eng-In-Charge.

S&F in Modular socket 16/15A-2/3 pin combined 2 Module As per existing complete all as specified and directed by Eng-In-Charge.

Supply & fix in repair/replacement ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge.

M&L in repair of sub main wiring complete with PVC insulated cable two run of 4 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

Supply and fixing in replacement MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement for LED tube light fittings 1x18Watts, 230 volts wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired complete all as specified and directed by Eng-In-Charge.

Supply and fixing in replacement for LED light fittings 1x12Watts, single side connection 230 volts wall mounted LED type complete with all accessories internally pre wired complete all as specified and directed by Eng-In-Charge.

Taking down Exhaust fan of any size and any type as existing, dismantling fan blade, dismantling electric connection complete all as specified and directed. Note: submit complete fan after dismantling to MES store

Supply and fix exhaust fan 300 mm sweep silent type in PVC Body as required at site complete all as specified and directed by Eng-In-Charge. Note : This item includes rates of making hole for exhaust fan fixing as per size and resurfacing with clean look .

Haritwal traders (BID ID -3426464)

divyarsh entrprise (BID ID -3426612)

Shree Builders (BID ID -3428620)

DMA PROJECTS (BID ID -3425608)

GIRNAR CONSTRUCTION (BID ID -3428465)

UMA CONSTRUCTION (BID ID -3426917)

Abhishek Enterprises (BID ID -3425850)

Ramdev and Sons (BID ID -3426156)