PVIP Fabrication Painting and Erection of new shutter of size 1.4x1.1m(H) 1NO, 1.3x2,25m(H) 2Nos. and 0.75x.80m(H) 1NO at kalampoor, Thiruvankulam MD and Veloor Branch canal respectively Overhauling alignment correcting of canal shutters

Amount

THIRUVANKULAM MD,KALAMBOOR FC,VELOOR BRANCH CANAL-Fabrication, Painting and Erection of two Nos. shutter size 1.3x2.25m(H) 1.40x1.100m(H) 1N0, and 0.750x.800m(H) respectively

od69385/2019_2020/MH : Dismantling of the canal shutter (Up to 2 Tonne weight ) /Hoisting Unit /Embedded parts etc of the same and stacking at a distance of 100 meter including hire of machinery labour etc . complete as directed by the departmental officer at the site (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting unit as 80%)

Cost of supply and stacking material for Shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Fabrication and supply of shutter

od69419/2019_2020/MH : Fabrication and Supply of Structural steel canal shutters(up to 2 Tonne of weight )/ Hoisting Bridge /Platform and accessories etc for the same as per approved specification , drawing and direction of deptl officer at site including cost of labour, machinery , all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

Cost of supply and stacking material for fabricating hoisting platform

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

Fabrication of hoisting bridge

od69419/2019_2020/MH : Fabrication and Supply of Structural steel canal shutters(up to 2 Tonne of weight )/ Hoisting Bridge /Platform and accessories etc for the same as per approved specification , drawing and direction of deptl officer at site including cost of labour, machinery , all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

supply and fixing screw shaft

od69420/2019_2020/MH : Providing EN-8 Screw rod 7.500 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting speed of around 5.00cm/min for 24 rpm of hand operation including cost of all materials, labour hire charges and conveyance

od69421/2019_2020/MH : Providing EN-8 Screw rod with one number of EN-8 Screw shaft, hand operation including cost of all materials , labour, hire charges and conveyance

Supply and fixing of Screw Hoist Units

od69422/2019_2020/MH : Providing worm and pinion having a lifting speed of around 5.00cm/min for hand operation including cost of all materials labour hire charges and conveyance

od69423/2019_2020/MH : Providing base and nut arrangement for hoisting the shutter including cost of material, labour etc for Casting Machining and Assembly

Painting the shutter

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Painting the hoist bridge

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Erection of the shutter

od69424/2019_2020/MH : Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . lader etc for the same including, alignment correcting and setting complete including cost of all labour, machinery , incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied.

Erection of the hoisting girder

od69424/2019_2020/MH : Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . lader etc for the same including, alignment correcting and setting complete including cost of all labour, machinery , incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied.

Overhauling

od54674/2019_2020/MH : Overhauling the hoisting mechanism including dismantling and cleaning the screw rod,base nut,greasing, lubrication, replacing of fasteners bearing and reassembling, conducting trial to provide a smooth movement of the shutter as per the directions of departmental officer at site.

Fabrication and fixing of anchoring clamp for fixing existing hoist beam

od55156/2019_2020/MH : Fabrication and fixing anchoring clamp for fixing the existing hoist beam including cost of all materials machineries labour all lift and lead incidental and conveyance charges etc. complete

Bidder Name

JOBIN JOSEPH