PROVISION OF TECHNICAL STORAGE ACCN AT MASIMPUR UNDER GE SILCHAR

Amount

NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Lumpsum price workedout by the tenderer for BUILDING & STRUCTURES WORKS as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the bidder/ tenderer for SITE CLEARANCE, SITE DEVELOPMENTS & EARTH WORKS as listed in Schedule 'A' Part-II.

Lumpsum price worked out by the bidder/ tenderer for ROAD / HARD STANDING as listed in Schedule 'A' Part-III.

Lumpsum price worked out by the bidder/ tenderer for RETAINING WALL / PROTECTIVE WALL as listed in Schedule 'A' Part-IV.

Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-V.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-VI.

Lumpsum price worked out by the bidder/ tenderer for LIGHTNING PROTECTION as listed in Schedule 'A' Part-VII.

Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule 'A' Part-VIII.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule 'A' Part-IX.

Lumpsum price worked out by the bidder/ tenderer for FIRE FIGHTING as listed in Schedule 'A' Part-X.

Sch 'A' Sec-XI (Miscellaneous Items) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

S&F LED street light fitting of 35 Watt, including LED lamp complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece, high pressure die cast aluminium alloy, monolithic construction totally enclosed, dust and water proof with minimum IP65 protection as per IS-10322-1982(Part-I) with latest amendments and input voltage range 140-300 VAC, frequency 50-60Hz, P.F should be more than 0.9 with THD(I) less than 10%, cool white color and. Fitting should be provided with min 4 KV surge protection, constant current constant voltage driver, high voltage withstanding capacity upto 300 VAC and also have double phase protection, no load, open circuit and short circuit protection, Light fitting suitable for ambient temperature from minus 10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/toughened glass to ensure minimum IP65 degree protection. The lumen output shall not be less than be 110 lumens per watt, life should not less than 40Khr, color index 6000K and must be certified by the relevant test report Fitting should fixed on pole using and including 1.2m long 40mm dia GI pipe light grade bend to shape and fixed using two nos clamps fabricated using MS Flat iron 40x5mm including necessary nut bolts and washers and making electrical connection using 1.5sqmm, 3 core multi-stranded copper conductor PVC insulated and over all PVC sheathed cable form light fitting to junction box complete all as specified and directed

S&F HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 250 x 200 x 105 mm with 16 Amp 4 Way heavy duty terminal block with 6 Amp MCB SP and two number of cable entry gland of standard size with suitable stainless steel bracket to fix with pole complete all as specified and directed.

S&F PVC insulated and sheathed cable with stranded copper conductor of size 1.5 sqmm, 3 core, 1100 volt grade including PVC conduit of 20 mm dia with clamps fixing with pole complete all as specified and directed.

Design, supply, install, testing and commissioning of Suspended type Lightning protection network system suitable for explosive storage building by providing required air gap for natural insulation, protection angle not less than 30° on each side of ACSR conductor and sagging of ACSR conductor not exceed 1/10th of its suspended length complete with following items:-

Supply, install, testing and commissioning of Steel tubular swaged pole type 410-SP-Mpa as per IS : 2713 (PART II) - 1980 (16 mtr long) complete with mild steel base plate, finial taper plug, bolts, nuts and screws including two coats of aluminium painting over a coat of primer for exposed surfaces and two coats of bituminous black paint over a coat of primer to the surfaces in contact including excavation of earth work and PCC (1:3:6) type C2 foundation complete all as specified and directed. Note: Pole to be installed at least 02 meter (min) away from side of the bldg.

S&F Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

S&F Single pointed air termination copper rod 16 mm dia, 1000 mm long including its fixing accessories over pole complete all as specified and directed.

S&F Pin type, porcelain, vitreous, white, brown or green insulator used for lightning protection purpose including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, of suitable size complying requisite standards complete all as specified and directed.

S&F flexible tinned copper strip 20x3 mm connecting Air termination rod, ACSR conductor and down conductor as required with fixing accessories complete all as specified and directed.

S&F epoxy powder coated Flameproof/Weatherproof lighting MCB distribution panel board SPN 8 Way having IP66 protection enclosure of Cast Aluminum alloy material including including 01 No. Incommer MCB, 2 pole, 32 Amps 'C' type and outgoing SP, MCBs 6 to 32 Amps 06 Nos with complete internal common bus-bar & wiring up to terminals complete all as specified and directed. NOTE : Flame proof/ weather proof flexible SS conduit to be used for termination of wiring in DBs and wherever required. Make : Shyam Switchgear (CAT No. SSPL/MCDB/186) / Sudhir Electricals.

S&F epoxy powder coated Flameproof/Weatherproof lighting MCB distribution panel board SPN 12 Way having IP66 protection enclosure of Cast Aluminum alloy material including including 01 No. Incommer MCB, 2 pole, 32 to 63 Amps, 'C' type and outgoing SP, MCBs 10 Nos 6 to 32 Amps with complete internal common bus-bar &wiring up to terminals complete all as specified and directed. NOTE : Flame proof/ weather proof flexible SS conduit to be used for termination of wiring in DBs and wherever required. Make : Shyam Switchgear (CAT No. SSPL/MCDB/186) / Sudhir Electricals.

S&F Flameproof cum Waterproof LED light fitting of 45 W, suitable for ceiling surface mounting, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish with all accessories pre wired and including connecting up with three core flexible copper conductor cable of suitable size including flame proof / weather proof fleixible SS conduit pipe 300 mm long terminated in light fitting complete all as specified and directed.

S&F Flameproof cum Waterproof LED Bulk Head light fitting of 30 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish with all accessories pre wired and including connecting up with three core flexible copper conductor cable of suitable size including flame proof / weather proof fleixible SS conduit pipe 300 mm long terminated in light fitting complete all as specified and directed.

S&F Flame proof/ Weather proof LED light fitting 1x20 Watt, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size including flame proof / weather proof fleixible SS conduit pipe 300 mm long terminated in light fitting complete all as specified and directed.

Supply, Install, Testing and commissioning of a remote annunciator with supervised wireless link to the FACP, showing Alarm / Supervisory / Fault with zone / device text. Polling interval ≤10s; loss-of-comms trouble ≤60s. Back - lit LCD, LEDSs (Alarm, Supervisory, Fault, Power, Link), internal buzzer (≥75 dB @ 1 m) with silence key as permitted. Power 230 V AC with charger and batteries sized for ≥ 24 h standby + 30 min alarm. Enclosure IP54 for indoor brigade room. Provide mounting hardware, pairing, signal survey, labels, and commissioning records complete all as specified and directed.

S & F of Data line Surge Protection Device (SPD) sitable for RS-485, two stage, replaceable Modules, single phase and neutral, T2 -limb, Imax 20 KA per pole complete fixed in FACP & Repeater Panel and making connections complete all as specified and directed

Supply, Install, Testing and commissioning of External Siren with Beacon set, IP65 minimum, 24 V DC polarized, synchronization-capable with the chosen NAC sync. Horn output ≥ 105 dB @ 1 m, high intensity LED strobe, outdoor type, silenceable horn with non - silence strobe supported by panel. UV-stabilized housing, red lens, -10... +55ºC, terminals for 1.5-2.5 mm², gasketed back-box and glands included; compliant to relevant alarm device standards. Provide addressing labels, circuit ID, and EOL placement, drawings. Perform audibility and sync tests during commissioning complete all as specified and directed

M & L flame retardant low smoke & low halogen fire alarm armoured cable having stranded class 2 copper conductor conforming to EN60228, insulated with XLPE type GP8 conforming to BS 7655-1.3. extruded inner sheath with PVC conforming to BS 5467, armoured with galvanized steel round wire and sheathed with extruded FRPL PVC conforming to BS 5467, suitable for voltage rating 600/1000V, maximum operation temperature 90°C, maximum conductor temperature at short - circuit 250°C, Red in colour, including laying, termination and ferruling complete as specified and directed by the Engineer-in-Charge. (for Repeater Panel)

S & F of perforated hot dipped galvanized iron Cable tray of size 100 X 50 X 1.6 mm, having galvanization thickness not less than 50 microns and perforation not more than 17.5% including fittings viz, joints, bends, tees, etc, in convenient sections of length complete including cable tray supports and associated accessories, all as specified and directed.

M/S ALLIED CONSTRUCTION (BID ID -3493628)

M/s Nice Traders (BID ID -3494292)

KESHAV ENTERPRISES (BID ID -3494243)

M/S DAYAL DAS (BID ID -3500987)

SAHARUL AMIN BARBHUIYA (BID ID -3491159)