Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-I₹43.1 LAccepted-AOC 245 6 LOWER DHALPUR KULLU DISTT KULLU H P 175101 H P | KULLU | KULLU | HIMACHAL PRADESH | 175101 | ₹43.1 L | L-I | Accepted-AOC Lower side quoted rates. |
| 2 | L-II₹43.3 LRejected-Finance CHIEF ENGINEER OP KANGRA ZONE HPSEBL DHARAMSHALA | KANGRA | HIMACHAL PRADESH | 175013 | ₹43.3 L | L-II | Rejected-Finance Higher side quoted rates. |
| 3 | L-III₹43.6 LRejected-Finance GOVT CONT V P O LEDA TEHSIL BALH DISTT MANDI | MANDI | HIMACHAL PRADESH | 175001 | ₹43.6 L | L-III | Rejected-Finance Higher side quoted rates. |
| 4 | L-IV₹45.8 LRejected-Finance 82 10 POST OFFICE ROAD MANDI DISTT MANDI H P | ₹45.8 L | L-IV | Rejected-Finance Higher side quoted rates. |
| 5 | L-V₹46.1 LRejected-Finance 25 INDUSTRIAL AREA PHASE II NAGROTA BAGWAN DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | ₹46.1 L | L-V | Rejected-Finance Higher side quoted rates. |
Tender Value
₹52.8 L
EMD Value
₹52,759
Closing Date
13 Feb 2026, 11:00 amClosed
SE
O/o SE(op.) Circle Mandi HPSEBL Mandi
Tender for supply of material, erection, testing and comm. of 630 KVA, 11/0.4 KV DTR, 11 K V H T line, Aug. of 11 K V H T line and HT Metering Unit for prov. SOP to Prop. EV Charging Station at HRTC Bus Stand Mandi in ES Mangwain UESD No-1 Mandi
2026_HPSEB_127599_1
HPSEBL/OCM/NIT-26/2025-26
Open Tender
Electrical Works
120 days
O/o SE(op.) Circle Mandi HPSEBL Mandi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
₹52,759
27 Mar 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
(Supply Part) - 1X630 KVA 11/0.4KV Sub-Station
Prov. 630KVA,11/0.4KV DTR
Prov. Steel Tubular Pole 10 Mtrs. Long
Prov. RCC muff 2000mm long with concrete feeling
Prov. MSCI X-arm 4000X100X50X6mm
Prov. MSCI X-arm 7500X100X50X6mm
Prov. MSCI X-arm 7500X75X40X6mm
Prov. MSAI X-arm 7500X50X50X6mm
Prov. 11KV Isolator unit without earth switch
Prov. 11KV Isolator unit (630 A, 25 KA, with ES)
Prov. DO fuse unit complete (11KV)
Prov. 11 KV Lightning arrestor (9KV,10KA)
Prov. Disc insulator including Dead-end clamp etc, complete fitting for bus-bar
Prov. Pin Insulator (11KV)
Prov. Half clamp (50X6mm Flat)
Prov. Full clamps (50X6mm Flat)
Prov. Eye hook (12”X15mm)
Prov. Pipe Earthing complete (11KV)
Prov. Stay-set complete (HT)
Prov. Stay wire 7/4mm 2 (9Kg per stay)
Prov. G.I. Wire 7/3.15mm2 for 4 Pole structure
Prov. AAAC 80mm², 7/3.81 mm for bub-bar & jumper
Prov. MS Nuts & Bolts off size (15mm)
Prov. Barbed wire for anti climbing
Prov. Alluminium Paint 1st Grade quality for double coat to six pole structure& chain link fencing
Prov. LT Distribution Panel with ACB (1000 amps,50KA, 4 Pole)1 No and MCCB (630 Amp ,36 KA) 3No for LT feeder
Prov. Cable LT 3.5 X 500 mm² 1.1 kV XLPE Cable Unarmoured
Prov. Alluminium Thimble
Prov. Copper Thimble
Prov. Danger Plate (440 Volts)
Add Transportation Charge for 630 KVA, 11/0.4 KV DTR
(Supply Part) - 11KV HT line on XLPE Cable
Prov. Steel Tubular Pole 10 Mtrs Long with base plate
Prov. R.C.C. Muff for Steel Tubuler Pole
Prov. 11 KV XLPE cable 3C 120 MM2
Prov. 11 KV Heat shrinkable Termination end kit XLPE srinkable Kit 120 MM2 O/D Type
Prov. 7/3.15 mm Massanger wire to hold the XLPE Cable (206x3%=212x0.430Kg P Mtr. = 91.16 Say 91 Kg)
Prov. Cable Clamp with bolt
Prov. X-Arm (Channel Iron (75x40x6MM) Length 2800mm
Prov. X-Bracing Set MS Angle Iron 50X50X6MM LN 2.80
Prov. HT Stay set complete in all respect
Prov. Stay wire(7/3.15mm)(10.0 kg Per Stay Set)
Prov. Full Clamp for Stay
Prov. Facade Hook for HT
Prov. HT Pipe Earthing Set Complete
Prov. Full Clamp
Prov. Half Clamp
Prov. Turn Buckle(HT)
Prov. Barbed Wire
Prov. Danger Plate(11000 Volts)
Prov. GO AB Switch unit (11 KV,400A,25 KA)O/D Type
Prov. M.S. Nuts & Bolts of various sizes.
Prov. Aluminium Paint
Add Transportation Charge complete in all
(Supply Part) - HT Metering Equipment
Prov. CT PT combined unit (11KV/110V) 400/5 Amps
Prov. 3 Phase 4 wire CTPT operated static Trivector Energy Meter (DLMS) PT ratio -/110V,CT ratio -/5 A
Prov. AAAC conductor 7/3.15 mm for jumper
Prov. PVC control cable 4mm2 (multistrand copper)
Prov. Aluminium Thimble 120 mm2
Prov. MSCI X-arm (2800X100X50X6mm) for CTPT bed
Prov. MSCI X-arm (750X100X50X6mm)
Prov. MSAI Knee bracing set (750X75X40X6) 4Nos
CT/PT Belting a)MSAI (2800X50X50X6mm) 2Nos
CT/PT Belting b)MSAI (460X35X35X6mm) 2Nos
Prov. MS nuts & bolts various size (Galvanised / coted Preferably 16mm O or more with flat and spring washers
Add Transportation Charge complete in all
(Supply Part) - Augmenatation of 11 KV Paddal Feedeer
Prov. Steel Tubular Pole 10 Mtrs Long with base plate
Prov. RCC Muff for Steel Tubuler Pole
Prov. ACSR 6/1/4.72 mm MM2 100 MM2 /C 3% Cutting @ Sagging
Prov. XLPE HT Cable Armoured 240 mm2 from 33/11 KV DTR to Panel
Prov. 11 KV Heat shrinkable Termination end kit XLPE srinkable Kit 240 MM2 O/D Type
Prov. 11KV Isolator unit without earth switch
Prov. Pin Insulator (11KV)
Prov. Disc insulator including Dead-end clamp etc, complete fitting for bus-bar
Prov.MSCI X-arm 75X40X6mm 2800 mm (10 No)
Prov. MSAI X-arm 50X50X6mm 2800 mm (17 No)
Prov. MSAI X-arm 50X50X6mm 3000 mm (20Nos)
Prov. GI Wire 6 SWG for Gaurding
Prov. Eye hook (12”X15mm)For Gaurding
Prov. HT Stay set complete in all respect
Prov. Stay wire(7/3.15mm)(10.0 kg Per Stay Set)
Prov. Full Clamp for Stay
Prov. HT Pipe Earthing Set Complete
Prov. Full Clamp
Prov. Half Clamp
Prov. Turn Buckle(HT)
Prov. Barbed Wire
Prov. Danger Plate (11000 Volts)
Prov. GO AB Switch unit (11 KV,400A,25 KA)O/D Type
Prov. M.S. Nuts & Bolts of various sizes.
Prov. Aluminium Paint
Transportation Charge complete in all
(Erection Part ) - ( 1X630 KVA 11/0.4KV Sub-Station)
Add Loading un-loading of 630 KVA DTR wirt Hydra
Add erection charge of double Steel Tubular pole (10 mtrs long) complete in all respect
Add erection charge of T-Set (each) complete in all respect
Add erection charge of bus-bar (each) complete in all respect
Add instalation charge of isolator (11KV) complete in all respect
Add Erection charge of 630 KVA,11/0.4 KV DTR complete in all respect
(Erection Part ) - 11KV HT line on XLPE Cable
Add Erection Charges of S/Tubular Pole 10 Mtr Long complete in all respect as per CD 2025-26
Add erection of Stay Set (HT) complete in all respect complete in all respect as per CD2025-26
Add erection of Earthing (HT) complete in all respect complete in all respect as per CD 2025-26
Add erection of 11 KV XLPE cable 3C 120 MM2 complete in all respect
Add erection of GO Switch complete in all respect
(Erection Part ) - (HT Metering Equipment)
Add erection charge of Metering equipment along with CT PT combined unit, X-Arms Jumpering, PVC Control cable etc. complete in all respect.
(Erection Part ) - Augmenatation of 11 KV Paddal Feedeer
Add Erection Charges of S/Tubular Pole 10 Mtr Long complete in all respect as per CD 2022-23
Add erection of Stay Set (HT) complete in all respect .
Add erection of Earthing (HT) complete in all respect .
Add erection of XLPE HT Cable complete in all respect .
Add erection of 6/1/3.35mm ACSR Cond complete in all respect .
Erection Of GI Wire complete in all respect .
Add erection of GO Switch complete in all respect .
Mannual carriage of materials i. e. Steel Tubular poles with MuffCross Arms Insulators, Stay Set & Stay Wire, ACSR Conductor, Cable & G I Wireof 11 KV HT LINE from road to site of work complete in all respect.
Add Dismantlement Charges of 1.00 KM 11 KV HT Line conductor complete in all respect .
Civil Work DTR Bed
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size)
Foundations, footings, bases of columns, etc. for mass concrete.
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Centering and shuttering including strutting, propping etc. and removal of form for: i)Foundations, footings, bases of columns, etc. for mass concrete.
ii) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
DTR Fencing
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4graded stone aggregate 20 mm nominal size)
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In single Stanchions composed of rolled steel joists or channels with caps,bases splices,angles brackets etc.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm
Supplying and stacking at site:- Bajri Spreading of stone aggregate 20 mm thick.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
PUBLICATION.pdf
Tender Documents • 0.57 MB
GuidelineforERA.pdf
Additional Documents • 2.33 MB
BOQ_188458.xls
BOQ • 0.31 MB
SBD.rar
Tender Documents • 11.43 MB
Download all tender documents and submit your bid