SPECIAL REPAIR TO BLDG NO P-60 AND P-61 AT SNC (O) MESS NB(K)

Amount

Dismantling single layer MP roofing tiles including ridges complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling battens for tiles, shingles etc spaced exc 15cm of any size incl tilting fillets complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

M&L for Mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

S & F 220 mm width rectangular UPVC SWR heavy duty ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips stop end drop etc complete all as specified and as directed.

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified

S&F for structural like truss, rafter and purlin etc in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive paint , over a coat of red oxide on steel surfaces complete all as specified and as directed.

S&F 0.80 mm thick glavanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified.

S & F of welded galvanished steel wire fabric in n.exc 4 kg per sqm to wood or steel members complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified.

M/L 2nd class Hw Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M/L 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 30mm thick IInd class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

M&L 16 to 18mm thick Rub wood as in Cub board door Shutters, storage rack shelves etc. cut to shape as specified and fixed with screws, complete all as specified and directed. Make: Rubco

M&L second class HW plain fillets square or rectangular in section area exeeding 13 sqcm but not exeeding 25 square cm fixed with screwscomplete all as specified and as directed..

S&F in repair magnet catcher to wooden frame work complete all as specified and directed.

S&F 75mm hasp and staple Aluminium anodised (ISI Marked) fixed with screws complete all as specified and as directed. .

S&F mild steel work in hold fasts etc and similar small articles confirming to Fe-290 Gde E 165 fixed in plain cement concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) including treating with tar or coal tar black paint complete all as specified and as directed

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S/F 100 mm long stainless steel butt hinges medium weight complete all as specified and as directed.

S/F 75 mm long stainless steel butt hinges medium weight complete all as specified and as directed.

S&F Brass barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.

S&F Brass barrel tower bolts, 100 mm long of extruded section complete all as specified and directed.

S&F Brass Mortice lock, 4 lever with cascade rose handle, 240 mm lock body, eco pin cylinder 70 mm knob from inside and with 3 keys complete all as specified

S&F Brass handles, cast type, polished bright "D" type anodized 150 mm long complete all as specified and directed.

S&F Brass handles, cast type, polished bright "D" type anodized 100 mm long complete all as specified and directed

M & L 2nd Class hardwood Plain fillets. square, rectangular or triangular in section exc 6 sq cm not exc 13 Sq cm , clean sawn, secured with nails or brads complete all as specified

M/L preparation of new woodenSurfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets/grid complete all as specified

S/F Aluminum snap grid false ceiling with grid 605x605mm size including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long complete all as specified.JINDAL/INDAL/HINDALCO)

S/F 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with stainless steel screws complete all as specified

M & L for two coat of OBD overa coat of alkali resistant primer on new ceiling surfaces and including preparation complete all as specified and directed

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided for complete all as specified and as directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified.

M&L PCC type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 3 mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid seprately)

M&L for epoxy tile joint filling for item No 42 using Kerapoxy of MPAEI or equivalent on floor walls complete all as per manufacturer instruction. (Size of tile exc 0.11 Sqm but n exc. 0.38Sqm)

M& L for Virified Ceramic tiles in vertical surface each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair face of brick work or concrte surface set and jointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 2mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid seprately)

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc.approved Pattern over cement sreed 15 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 3mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid seprately)

M&L for epoxy tile joint filling for item No 44 & 45 using Kerapoxy of MPAEI or equivalent on floor and walls complete all as per manufacturer instruction. (Size of tile exc 0.42Sqm but n exc. 1.00Sqm)

M& L for Virified Ceramic tiles as in skirting over cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and as directed.

M & L for 18-20mm thick granite stone slab( Jet black )over cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed .

Taking down cement plaster on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L cement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using Approved WPC complete all as specified and as directed. (Note : WPC shall be meassured separate item)

M&L for rendering 10 mm thick on fair faces internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even and fair with out using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and as directed.

M & L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima Protek or equivalent) paint over anti weather coat primer complete all as specified and as manufacturer's instruction (This item to be executed by authorised applicator of manufactures only)

M & L for preparation new plaster on internal surface of wall and damp-proofing barrier Nano technology premium quality acrylic primer with water proofing effect up to 2 bar negative and applying 2 mm thick wall care putty on new wall surfaces and & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed by Engineer in charge

M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and damp-proofing barrier Nano technology premium quality acrylic primer with water proofing effect up to 2 bar negative over 2 mm thick water proofing puttyon old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion on primered surfaces all as specified and directed by Engineer in charge complete all as specified and directed.

Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek or equivalent) paint over anti weather coat primer complete all as specified and as directed by Engineer in Charge Note : (i) Application of paint, primer shall be as per manufacturer's instruction (ii) This item to be executed by Authorised applicator of manufactures only

M/L antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc in apron complete all as specified and as directed.

M/L antitermite post costruction treatment under existing floors using emulsion one litre /hole 300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors complete all as specified and as directed.

M/L antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with cement motar 1:2 to match existing floor complete all as specified and as directed..

M/L antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed..

S&F in repair counter Top wash Basin for hand wash white flat back of size 550x445mm fixed or laid on granite platform includingbrackets, waste pipe & CP brass waste coupling of 32mm dia including pillar tap complete all as specified and directed.

S&F in repair 450 mm PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed .

S&F in repair Vitreous China cloured wall mounted 'Stainzfree' wash down water closet pesestal pattern including flushing cistern fitting complete all as directed.

S & F in repairs Soap dish Stainless steel with chromium plated complete all as specified. Make : Jaquar Cat No AKP-35731P or equivalent in approved list

S&F CP in repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified Jaquar Cat No CAN-1111SM or equivalent in approved list .

S&F in repair for SS towel ring of standard quality complete all as specified and directed. Jaquar Cat No CAN-1121BN or equivalent in approved list

S & F in repair Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge. Jaquar Cat No CAN-1173 or equivalent in approved list

S&F in repair Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.Jaquar Cat No AQN-7771 or equivalent in approved list

S&F in repair for 25 mm curtain rod stailless steel with chromium plated complete all as spd and directed

S&F in repair stainless steel chromim plated fancy type knobs and bracket complete all as specified

M&L in repair providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed

M&L for RCC(Nominal Mix) in type-B1 1:2:4 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole covers,drains set in CM 1:6 complete all as specified and as directed.

M&L 75mm thick PCC Type CI 1:3:6 (20mm graded agg) as in plith protection finished even and smooth without using extra cement complete all as specified and as directed.

S & F Powder coated anodised aluminium 10mm dia hexagonal channel (decogrill) for grill fixed to upvc window/ ventilator frame with aluminium bidding complete all as specifed.Make : JINDAL or equivalent section from HINDALCO /INDAN A1 COMPANY

S&F factory made uPVC Ivory colour Sliding window Three track area not exceeding 2.00 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass, wire mesh & decogrill and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S & F sheet glasses, ordinary quality plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F sheet glasses, ordinary quality plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F Figured glass, pin head type plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

Excavating in post holes in soft/ loose soil (or similar holes) each n.exc 0.5 cum, getting out ramming, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm.complete all as specified and as directed.

M&L for PCC 1:2:4 type B 1 as in foundation, filling & mass concrete complete all as specified and as directed.

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats etc using Fe-290 Grade E-165 complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.Note : The coating on sheets shall be @ 150 gm/sqm (total on both surface) and having AZ 150 marked. (b) The sheets shall be in one piece in length upto 6.00 m

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick base material of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note : The coating on sheets shall be @ 150 gm/sqm (total on both surface) and having AZ 150 marked. (b) The sheets shall be in one piece in length upto 6.00 m

Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings joints fixed to wall with claps including all as specified

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings joints fixed to wall with claps including all as specified

S&F in repair PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed.

S&F in repair PVC (SWR) bends 75 mm dia with access door complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm dia vent cowl complete all as specified and as directed.

S& F in repair PVC (SWR) 75mm dia vent cowl complete all as specified and as directed.

S&F in repair PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and as directed.

S & F 110mm dia PVC (SWR) T single junction with access door complete all as specified and as directed.

S & F 75 mm dia PVC (SWR) T single junction with access door complete all as specified and as directed.

S&F in repair Grating round 140 mm size of Stainless steel (with/without hole for waste pipe) complete all as specified and as directed.

S&F in repair peg set of 6 pin, hooks & rail of stainless steel and fixed with screws complete all as specified and directed.

Taking down wall panelling and similar work complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S & F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.

Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified.

M/L 2nd class HW Clean sawn battens at 15 cm centres, sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.

Supply and fixing suspended false ceiling consisiting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Serew/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat plasting emulsion paint over one coats of primer & one layer putty 1.5mm thick suitable for gypsum board (As per the recommendation s/ practice) including necessary scaf folding and shuttering complete as directed as specified and directed by Engr-in-Charge.

Material and labour for 100 mm thick plain cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in hard standing, laid in alternate bays including necessary form work and finishing the surface of concrete fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb and coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Coarse aggregate as in cushoning for paver block graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and as directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment.complete all as specified and as directed.

Demolition of brick work/Block masonary built in cement mortar, including all quoine, arches, pillar etc all as specified and directed by the Engineer-in-Charge.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep and getting out in loose/soft soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified

M & L for precast cement concrete cover slab for man hole, in type B-1 (1:2:4) using 20 mm graded aggregate set in cement mortar 1:6. (Reinforcement shall be measured and paid seperately) complete all as specified and as directed.

M&L for precast cemnet concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

S & F 6mm to 8mm dia TMT bars (CRS/HCRM/CRM) in reinforcement cut to length ,bent to shape required including crankling, bending hooking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and as directed.

M&L 15 mm dia thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement. complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) pipes single socketed, in any length, with rubber ring joints, laid in trenches or in floors. complete all as specified and as directed.

M&L cement concrete 1:3:6 type C2 bed to drain pipes including packing under and haunching against the side of pipes after they are laid and tested in cement mortar all as specified. (Bore of pipes 150mm) complete all as specified and as directed.

Removal of surplus soil to a distance n.exc. 50 m and n.exc. 1.5 m above the starting point as directed by Engineer - In - Charge.

S&F Hume pipe septic tank 25 users capacity including necessary earth work in soft/ loose soil, PCC 1:3:6 in bed concrete with accessories like AC vent pipe, cowl manhole cover etc including connecting to the sewer line complete all as shown in drg No.TD/A/57 sheet 1/1 including removal of old septic tank and connected works complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L Cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) in surface channels and drains complete all as specified

M&L for forming of fair finished drain or channel having 30 cm inner girth in cement concrete all as specified

S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as directed by Engineer in Charge

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick for fair finished flat surfaces (Horizontal or sloping) complete all as specified and directed.

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chawkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum tooxicity index of 12 for 100 gms) fabricated wih miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retrardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete asper direction of Engineer in Charge

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer in Charge

S&F powder coated Anodised aluminium frame for doors windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified

S&F aluminium powder coated door shutter with frames of size - 40x45x1.8 mm including screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges, mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60 x 40 x 1.8 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one number hydralic door closer per shutter & 5 mm thick tinted glass/ 4 mm thick ACP sheet required to be fitted in shutters is included in the item).

Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repair complete all as specified and directed.

S&F Toughened glass as in SS railing, partitions and similar work including cutting to shape, drilling holes required complete all as specified

S&F Stainless steel self-closing type hinges for cabinet of approved quality all as specified and directed

Supply and fix chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal complete all as specified and directed

Taking down carefully existing copper/aluminium point wiring for light/fan/bell/socket 5/15 points complete with fitting and fixtures such as switches, socket, ceiling rose, holder and bracket fitting with battens/conduits/wires/T/L fittings and making good the disturbed surfaces of wall and roofs etc and to match with existing colour complete all as specified and directed

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

S&F point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board. complete all as specified and as directed.

One 3 pin 5 Amp socket outlet point controlled by one switch on same board. complete all as specified and as directed.

All as per item No. 131 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. complete all as specified and as directed.

All as per item No. 131 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. complete all as specified and as directed.

M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make- Anchor/Crabtree/Schneider

M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make- Anchor/Crabtree/Schneider

S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed. Anchor/Crabtree/Schneider

S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Anchor/Crabtree/Schneider

M&L Bell push modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Anchor/Crabtree/Schneider

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/Crabtree/Schneider

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed..

Supply and fixing LED light fitting 1 x 20 Watt, minimum 120 Lumen/Watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting mirror type with high output diffuser 2 feet 10 Watt,minimum 110 Lumen/Watt 220V, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt minimum 120 Lumen/Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed.

S&F ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.Make : Havells/Orient/Usha/Crompton Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard.

S&F 250 mm sweep, PVC body exhaust fan heavy duty single phase 230 Volts, complete all as specified and as directed by Engineer in Charge. Note : Old fan will be deposited in MES store yard. Make: Havels Cat Part No Ventil Air-DX White or Crompton/Bajaj

S&F in replacement of Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 415V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F in replacement of Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F in replacement single pole and neutral 240 Volts, enclosure with three pin and earth plug and socket complete with one DP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified.

S&F MCB TPN/FP, 100Amps, 415 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F in replacement of MCB SPN, 32Amps, 240 volts, "B" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F in replacement of MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

M&L for Sub main wiring with two single core 2x4 Sqmm FRLS insulated and sheathed stranded copper conductor alongwith earth wire 4 Sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length).

M&L for Sub main wiring with two single core 2x6 sqmm FRLS insulated and sheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length).

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F XLPE insulated, armoured, 1100 volts grade, heavy duty cable of size 16 Sqmm nominal cross section, 4 core, aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified.

Supply and fixing junction/ terminal box of suitable size for passing/ looping of cables (Cable TV & telephone) wiring through 25mm nominal bore in/ out, of 01 to 04 way junctions as required at working site/ sopt complete all as specified and directed.

S&F Rigid non-metallic PVC conduit of size 25mm external dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

Suppling and laying in replacement of CPVC pipes of outer dia 40mm, SDR-11 and plain SDR-11 fittings on wall/ ceiling or laying in floors complete all as specified.

Suppling and laying in replacement of CPVC pipes of outer dia 20mm, SDR-11 and plain SDR-11 fittings on wall/ ceiling or laying in floors (concealed) complete all as specified.

Suppling and laying in replacement of CPVC pipes of outer dia 25mm, SDR-11 and plain SDR-11 fittings on wall/ ceiling or laying in floors complete all as specified.

S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. Make- Cera Cat Part No. F2004152 or Prayag/ Hindware.

S&F in replacement health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old one all as per specified and directed. Make- Cera, Cat Part No- F8030103 or Prayag/ Hindware.

S&F in replacement wall mixer (3- in - 1) with arrangment of both Telephonic shower and over head shower with bend pipe and taking down old unserviceble one complete all as specified and as directed by the Engineer in Charge. Make- Cera, Cat Part No- F1018403 equivalent in Jaquar/ Prayag/ Cera.

S&F in replacement concealed stop cock regular body, half turn with flange chromium plated CP cup fancy type of size 20mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge. Make- Cera, Cat No- F 2004351 and F4050502 or prayag/ hindware.

S&F Swivel shower in replacement of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT. complete all as specified and as directed. Make:-CERA/JAQUAR/HINDWARE

S&F in replacement of 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge. Make- Cera Model No. F2004201 or Prayag/ Hindware.

S&F PVC connection pipe in replacement of 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge.

S&F in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 ltrs complete all as specified.

S&F Ball brass valves (PTMT) in replacement of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

S&F CPVC Ball Valve in replacement of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F CPVC Ball Valve in replacement of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F in replacement pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed by the Engineer-in-charge. Make- Cera or Prayag/ Hindware.

S&F LED bed side lamp of 3 Watt, min 100 Lumen/Watt, 240 Volts, single phase phase, holder typewith metal body including fixtures and connecting accessories complete all as specified and directed by Engineer in Charge. Make Philips Cat Part No 48042 or Crompton/Havells

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 15 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified.

M.J.JOY AND COMPANY (BID ID -3119030)

Kurian And Varghese (BID ID -3117284)

M/s ANTONY THOMAS AND CO (BID ID -3118721)

Padmaja Specialities (BID ID -3127971)

SHAIJAL T M (BID ID -3129193)