PROVN OF 03X JCOS SINGLE LIVING ACCN AT BIRPUR UNDER GE DEHRADUN

Amount

Surface excavation in any type of soil (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and as directed by Engr-in-Charge.

M&L for Anti termite treatment treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfillto be measured) complete all as specified and as directed.

M&L for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion pe square meter of surface area all as specified and directed.

M&L for Anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Anti termite treatment Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.

M&L for RCC Type B-1, M-25 nominal mix (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for RCC Type B-1, M-25 nominal mix (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L RCC Type B1 M-25 nominal mix (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L RCC Type B1 M-25 nominal mix (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for Providing precast cement concrete M-25 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.

M&L Damp proof course in Cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces with WPC of 40 mm thick including necessary formwork complete all as specified and as directed by Engr-in-Charge.(WPC paid seperately)

M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L for Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork rough finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete all as specified and as directed .

M&L for rendering 15 mm thick on other then of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without extra cement complete all as specified and as directed by Engr-in-Charge.

M&L Surfaces of any description of black bituminous paint (each coat) of wood, steel, iron, concrete, brick, stone, etc. n exc 10cm in width or girth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without extra cement with WPC complete all as specified and as directed by Engr-in-Charge.(WPC paid seperately)

M & L rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling complete all as specified and ditected.

Supply only water proofing compound

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S & F mild steel TMT bar 6 to 8 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for new plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of wall and applying three coats of white wash on ceiling, off sets, pillar etc all as directed and specified.

M&L for preparation of new wooden painted surfaces including preparation and applying two coat of synthetic enamel paint any description, over a coat of pink primer, not overwise described, over 10 cm width/girth complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F in repair framed work such as grills,gratings,etc., with ends of bars shoulderedor riveted, or forged into spikes; framed guard bars;barred iron doors and similar work conforming to Fe 210,Gde E-165 complete all as specified and as directed by the Engineer-in-Charge.

Hardcore of gauge n exc. 63 mm, except material retreived from item 1 deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete as specified.

M&L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded stone agg as in sub base for laying floor finishes complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar of 1:6 complete all as specified and directed.

All as per itme No 36 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified.

M & L for coloured glazed ceramic tiles in vertical surfaces 450x300x7mm/ 350 x 250 x 7 mm thick over and Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&LNon - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar of 1:6 complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

S & F factory made Steel ventilator with top hung shutter including hinges, steel peg stay , complete all as specified and directed.

Supply and fixing of 4 mm thick plain Sheet glass,ordinary quality in windows exceeding 0.5 Sqm in each pane with stainless steel screws complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature and fixed with stainless steel wire staples complete all as specified.

S&F 2nd class hard wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints, supplied & fixed complete all as specified and ditected.

S&F mild steel flat iron for hold fasts and similar articles complete all as specified and ditected.

Supply and fix 35 mm thick second class hard wood plain framed paneled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge

S & F 35 mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts complete all as specified and directed.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts complete all as specified and directed by Engr-in-charge.

S&F 150mm size solid in one piece stainless steel handles,cast D type, fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel handles,cast D type, fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and ditected.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and ditected.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

M & L cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete.

S & F 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-Charge.

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 25 mm bore size complete all as specified.

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S & F vitreous china wash basin, white, flat back, size 550x400 mm including 32mm waste couplings, brackets and cutting for and pinning in ends of brackets complete all as specified and directed.

S & F 15 mm pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S & F 15mm fancy type, chromium plated stop valves, angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete

S & F Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

S & F brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

M & L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe.

S & F PVC (SWR) junction single, (Single T), any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe.

S & F PVC (SWR) juctipon double , (double T) equal and unequal of any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe.

S & F 75 mm dia PVC (SWR) vent cowl complete.

Supply & Fix PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

M & L PVC (SWR) GULLY trap 125/110 mm, setting And jointeing with solvent with solvent cement as per specified and directed

M&L Cast Iron Nahani Trap of 75 mm dia , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F brass chromium plated shower rose 125 mm size complete all as specified and directed by Engr-in-charge.

S&F 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample complete all as specified and ditected.

M&L 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggregate) as in plinth protection finished even and fair complete all as specified.

M&L Forming Construction joint 30mm deep x 10mm wide of grade A filled with sealing compound complete all as specified and directed by Engr-in-charge.

S&F Prelaminated particle board of size 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

S & F Continuous (piano) hinges of 30 mm width of flap, mild steel, bright finish or electrogalvanised complete all as specified as directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F Hasp and staple of 75 mm , mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F glass corner shelf suitable size made of 5mm thick toughned glass all as specified.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.

Removing excavated material exc 1.5 km n.exc 5 KM and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium Zinc coating GI based plain colour coated with any design steel sheet to match with profile sheet in 0.50mm thick of an approved of an colour having tensile strenth of 550 Mpa as in ridge,vally/gutter of roof , fixed with self tapping screws as specified by the GE/Engr-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in fdn of drain filling mass concrete as specified and directed.

M&L for PCC 1:3:6 type C1(using 20 mm graded aggregate ) as in copings finished even and smooth using extra cement as specified and directed.

Extra for forming fair finished of drain channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred stopped ends etc complete all as specified and directed.

Plain cement concrete type C1 1;3;6 (20 mm graded aggregate) in surface drains and channels complete all as specified and directed.

M&L Septic tank,exc, in ordinary soil, foundation in PCC 1:2:4 , brick work in CM 1:4 , RCC Slab covers including RCC precast manhole cover having 6 mm plate embedded all around/fibre reinforced cover with angle iron frame Vent and sludge chambers etc., complete for 25 users all as specified and directed by Engr-in-Charge.

M&L soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonry/Filling with brick bats, complete of size 1.2 M dia X 3.0 M deep all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 10 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and directed by Engineer-In- Charge

M&L for providing precast cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B0, 1:2:4 using 12.5mm graded stone aggregate and set in CM 1:4 complete all as specified and directed by Engineer-In- Charge.

M & L for precast RCC (1:1.5:3) type A-1 using 20 mm graded stone aggregate) as in cover slab for for manholes etc set in cement mortar (1:4) including use and waste of form work complete all as specified and directed by Engineer-In- Charge

S&F MS Flats, joist channel (Fe 410-W Gde E-250 Quality A), fixed indepently or framed without connecting plates confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge

M & L for cement concrete 1:3:6 type C-2 for 150 mm dia in concrete bed to drain pipes including packing under and haunching against the sides of pipes etc complete all as specified and directed by Engineer-In- Charge

M & L for reinforced concrete pipes,150mm dia class NP-3 laid and jointed complete with collars complete all as specified and directed by Engineer-In- Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-In- Charge.

M&L Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed by Engineer-In- Charge.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as spd.

M & L PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub bases 75 mm thick finished even & rough to receive finishing layer, etc. complete.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and directed by the Engr-in-Charge.

M&L Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L For PCC 1:2:4 type B-1( using 20mm graded aggregate ) as in copping, Kneelers, apex stones bed plates , Kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for Cutting existing steel tubing for alterations or additions (Each cut measured) pipe making connection of GI Pipe distribution branch with GI main of size 16 to 40 mm bore complete all as directed

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 16 to 50 mm bore complete all as directed

Supply, Laying, fixing & testing galvanished iron water tubing 'medium grade; 20 mm dia with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends , elbows, tee, checkneuts, caps, plugs etc laid in trenches for the following sizes complete all as specifed and directed. Note: Excavation and earth work shall be measuered and paid seperately under respective item of schedule 'A"

All as Same above item No. but galvanished iron water tubing 'medium grade; 25 mm dia

All as Same above item No. but galvanished iron water tubing 'medium grade; 40 mm dia

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

Supply, laying, jointing and testing of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed.

Supply and laying galvanised steel tubing 50 mm bore light grade laid in trenches or fixed to poles/walls etc for cable protection complete all as specified and directed.

S&F factory fabricated bus bar box

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following.

(a) One light point point controlled by one-one way switch.

(b) One light Ceiling fan point/ Exhaust fan point controlled by one-one way switch.

(c) One light point controlled by two way switch

(d) One bell point controlled by one-one way switch.

(e) One three pin 5 Amp socket on same board with other switches.

(f) One three pin 5 Amp socket on independent board

All as per item No. 2.00 above but one 3 pin socket outlet 15 Amp independent, cable 2.5 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral, with 2.5Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

All as per item No. 2.00 above but one 3 pin socket outlet 15 Amp independent, cable 4 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral, with 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

S&F Bell switch paino flush button type 5 Amp complete all as specified.

S&F ding dong bell AC 230 V single pole complete all as specified and directed .

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

M&L lamp holder insulated body with back plate suitable for angle and batten fitting complete all as specified.

M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC concealed conduit heavy duty accessories and fittings. PVC insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

S&F sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed.

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed.

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F in replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size .

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.

S&F in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed

M&L for stone/brick wall cutting in circular shape, grouting or suitable bolts suitable for 300 mm exhaust fan and making disturbed surface good plastering and distempering etc complete all as specified and directed (Job).

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm, 900 RPM, single phase, 230V AC with louver all as specified and directed 30 mm sheet. including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge.

S&F in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed .

S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 Volts 20 amp single pole MCB complete all as specrified & directed

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

SRI GANESH ENTERPRISES

M/s Teg Singh Negi

MOHAN LAL GUPTA

M.K Engineers

M/S Construction Solutions