PROVISION OF 04 X TOILET BLOCK AND 04 X BATHROOM BLOCK WITH COVERED ACCN INCL SEPTIC TANK FOR HI LIVING AT HAWS AND PROVISION OF TOILET BLOCK AT COMN COMPLEX AT GULMARG UNDER GE 969 EWS

Amount

Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes,laying cable/pipe etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil Complete all as specified and directed by Eng-In-Charge.

M&L for plain cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) in foundations filling and mass concrete. Complete all as specified and directed by Eng-In-Charge.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm all as speciifed.

Removing of excavated soil not exceeding 50 m and depositing where directed at a level n.exc 1.50 m above the starting point all as directed by Engr-in-Charge.

M&L for walling of random rubble masonry built in cement mortar 1:6 brought up to courses. Complete all as specified and directed by Eng-In-Charge.

M&L for providing cement concrete Type B-1, 1:2:4 (20 mm graded stone agg) as in copings plinth Courses, bond stones including use of form work all as specified and directed.

M&L for damp proofing course to horizontal surface including necessary formwork in cement mortar 1:2:4, type B-0, 40mm thick complete.

M&L for precast cement concrete block masonry with hollow blocks type C1 , 1:3:6 (using 16mm graded stone aggregate) masonry 10cm in thick and setting in cement mortar 1:4) Complete all as specified and directed by Eng-In-Charge.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement.

M&L for rendering 15 mm thick on brick work surfaces other than fair faces of brick work in cement mortar 1:6. Complete all as specified and directed by Eng-In-Charge.

M&L for rendering 15 mm thick cement plaster on stone masonary surfaces or surfaces of other than fair faces of brick work or one side of lathing in cement mortar 1:4, complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for hard core of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface complete all as directed.

M&L 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone agg) as in sub base of flooring, complete all as specified.

M&L 75 mm thick cement concrete type C2, 1:3:6 (using 20 mm graded stone agg) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement complete all as specified.

S& F roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (unframed work) Fe-290 (Gde-E-165)

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed by Eng-In-Chagre.

S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia

S&F Mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for fair finished surfaces in any position flat or curved Complete all as specified and directed by Eng-In-Charge.

M&L for form work to sides and soffits of floor or roof beam, columns, haunchings, girders, bressumers, lintels, cantilvers etc,also splays between floor and beams, etc, in rough finished surface of concrete.

M&L for RCC ,Nominal Mix 1:1:5:3 (20 mm graded stone aggregate) as in foundations, including rafts,footings, foundations beams,plinth beam, bases for columns etc basement slabs, under rammed piles and mass concrete, complete all as specified. beams cantilvers, bressummers, lintels over 1.5 m span, Complete all as specified and directed by Eng-In-Charge.

M&L for RCC ,Nominal Mix 1:1:5:3, (20 mm graded stone aggregate) as in beams, cantilvers, brassumers, columns, lintels over 1.50m span and the like Complete all as specified and directed by Eng-In-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S/F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified.

S/F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

M&L for PCC 1:3:6, type C-1, using (20 mm graded stone agg) for hold fast blocks, including necessary form work for rough finished surfacess etc. Complete all as specified and directed by Eng-In-Charge.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), hold fasts, wall ties hooks and similar artiles conforming to Fe-290 Gde E-165.

S&F 125 mm long cast type anodised aluminium handles. Complete all as specified and directed by Eng-In-Charge.

S&F MS butt hinges 100 medium weight cold rolled etc.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section. Complete all as specified and directed by Eng-In-Charge.

S&F 250 mm long Aluminium alloy sliding bolt with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast alu alloy. fabricated type, anodised 300 mm long all as directed.

S/F with 2nd class soft wood small fittings such as brackets of any type , latch and hinge blocks, shaped dooor and window stops and the like, including all necessary labours, articles n.exc 200 cu.cm each. Complete all as specified and directed by Eng-In-Charge.

Cutting holes in brick walls built in cement mortar not exc half brick for inserting hold fast etc and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B1 as required

M&L for providing 25 mm thick cement concrete Type B-1, 1:2:4 (20 mm graded stone agg) including finishing the surface even and rough, Complete all as specified and directed by Eng-In-Charge.

M&L for non skid coloured ceramic tiles 300x300x6-7 mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified

S&F glazed ceramic coloured tiles in verticles surfaces of size 450x300x7 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sand mortar 1:4, Complete all as specified and directed by Eng-In-Charge.

S&F 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm in each pane.

S&F steel ventilators with top hung shutter including hinges steel peg etc., Complete all as specified and directed by Eng-In-Charge.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore pipe

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore pipe

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore complete all as specified.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 110 mm bore complete all as specified.

S&F PVC (SWR) vent cowl, plain including jointing with solvent cement 110 mm bore complete all as specified.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F for (SWR) gully trap, plain with grating includingjointing with solvet cement 110 mm bore complete all as specified.

S&F Vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rest(exclding flushing cistern and flush pipe) including connection to trap, etcand to flushing pipe, sntysyponage pipe, etc, complete making good to floor. Complete all as specified and directed by Eng-In-Charge.

S&F PVC low level flushing cistern , sypmhonic action type, 10 ltr capacity with inlet ball valve and float and handle and including brackets & PVC bend pipe 90 cm long etc, Complete all as specified and directed by Eng-In-Charge.

S&F vitreous China wash basin, white, flat back size size 550 x 400 mm including pillar tape, waste fitting chromium plated brass and rubber plug, procelain stopper, a pair of CI brackets, waste pipe and waste cupling of 32 mm dia of PTMT (half or full threaded) (min wt 45 grms) etc. Complete all as specified and directed by Eng-In-Charge.

S&F tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to wall , Complete all as specified and directed by Eng-In-Charge.

S&F PVC connection 15 mm size, length 450 mm, with PTMT nuts, Complete all as specified and directed by Eng-In-Charge.

S&F pillar tap, CP fancy type of 15 mm with capstan heads, screwed down, high pressure, with or without lattered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F 20 mm bore stop valve fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 15 mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 1000 ltr capacity rotational moulded polythylene water storage tanks triple layers (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I. Complete all as specified and directed by Eng-In-Charge.

S/F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 25mm-210 gms, complete all as specified.

S&F compound girders and stanchions, lattic girders arial mass, staging for watrer tanks and the like including caps, bases, splices etc. Built up from two or more beam or channel sections or angles with plates including all lattic bars, stiffeners, gusset plates, etc. conforming to Fe-290(Gde-E-165).

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthtic enamel paint over a coat of red oxide complete all as directed.

S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

S&F 25mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in trenches/ floors.

S&F Brass Chromium plated shower roses of 125mm size with or without swivel joints, including fixing to steel pipe or union

S&F urinal, full vitreous China , white and full, fittings etc. Complete all as specified and directed by Eng-In-Charge.

M& L for 20 mm thick granite polished in wash basin counter and fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm Complete all as specified and directed by Eng-In-Charge.

Surafce excavation n exc 30 cm deep and averaging 15cm deep and getting out in any type of soil all as directed by Engr-in Charge

M&L machine pressed pre-cast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid on sand chshioning, with grey cement and no pigment, complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation,or in trenches for cable protection. Complete all as specified in SSR Part-I and directed by Eng-In-Charge.

M&L proiding cement concrete type B-1,1:2:4 (20 mm graded stone aggregate) as in kerb rounded or chamfered on edges, Complete all as specified and directed by Eng-In-Charge.

LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users complete all as per manufacture instruction.

Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in 1:4 cm, RCC cover slab in M-25/RR masonary /filling with brick bats, complete of size 2.40 m dia x 3.00 m deep.complete all as specified and shown in drg No.CESZ/TD-1080/2011

Cutting into existing manholes for connecting new drains pipe making good to pipes rendering cutting out existing benching for & forming branch channel (1/2 round of ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required internal dia of pipe 150 mm dia.

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete. Complete all as specified and directed by Eng-In-Charge.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars. Complete all as specified and directed by Eng-In-Charge.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. (WPC shall be measured and paid separately).

Supply only integral water proofing compound. Complete all as specified and directed by Eng-In-Charge.

M&L for cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) as in surface channels, drains etc. Complete all as specified and directed by Eng-In-Charge.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc. Complete all as specified and directed by Eng-In-Charge.

S&F Rolled mild steel in joist channel, angle(size 50x50 x 6 mm th), or tee sections fixed independly, without connecting plates, etc (cut to ordinary length) of Fe 410w (Gde E250) gde A supplied and fixed complete.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate. Complete all as specified and directed by Eng-In-Charge.

E&M Portion:-M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. Complete all as specified and directed by Engineer-In-Charge. For:- a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way.

All as per sr item no. 87 above but One 3 pin 5 Amp switch /socket outlet on independent board.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. Complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole 5/6 amp 240 volts, Complete all as specified and directed by Eng-In-Charge.

S&F Switch socket combination flush type multipurpose,2 in1, 3 pin suitable for 5 and 15 Amp,Complete all as specified and directed by Engineer-In-Charge.

S&F Switch socket combination flush type multipurpose,2 in1, 3 pin suitable for 5 Amp,Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body. Complete all as specified and directed by Eng-In-Charge.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting Complete all as specified and directed by Eng-In-Charge.

S&F distribution Board, SPN 8 Way, Double door Complete all as specified and directed by Engineer-In-Charge.

S & F MCB, SP 6-32 Amps 240 Volts Gold plus MCB B Curve, 10 KA. Complete all as specified and directed by Eng-In-Charge.

S&F MCB DP 40 Amps, 240 Volts, Gold plus MCB B Series. Complete all as specified and directed by Engineer-In-Charge.

S&F LED Lamp 15 W. Complete all as specified and directed by Engineer-In-Charge.

S&F Bulkhead luminaire comprising of high brightness LEDs 10W LED, IP-65 Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing surface and wall mounted led tube light fitting 20W, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including connection from ceiling rose to tube light with suitable size of flexible cable. Complete all as specified and directed by Engineer-In-Charge.

S&F linnet LED mirror light 1 feet, 14 watt, extruded engg plastic suitable for surface mounting on a ceiling. Complete all as specified and directed by Engineer-In-Charge.

S & F heavy duty exhaust fan range 300 mm sweep,1400 RPM, 230 volts,with louver shutter, XPM jaali,grouting, connecting to ceiling rose. Complete all as specified and directed by Eng-In-Charge.

M&L for sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC casing capping of required size with accessories along with 1 run of 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring Complete all as specified and directed by Eng-In-Charge.Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

Earthing complete with galvanised steel earth plate electrode of size 60cms x 60cms x 6.0 mm thick as per IS 3043 of 1987 buried directly in to the ground ( earthpit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to the galvanised earth lead by means of bolts , nuts check nuts and washers of galnanised iron or steel using GI Wire 4 mm dia as earthing lead as shown in electric plate No-3 of SSR- Part-1 connected to earth strip all as specifed or indicated including testing on completion and necessary excavation and earth work in any type of soil, returning filling, disposal of surplus soil, earth pit in PCC 1 :3:6 type C-1 using 20 mm graded stone aggregate, pit, funnel, 15 mm diia meduim grade watering pipe, 40 mm dia GI light grade earth lead protection pipe, CI frame and cover , wire copper lugs etc mesh, charcoal and common salt in alternate layer and testing complete. Note : The rate is inclusive of necessary earth work, RFR and removal etc Complete all as specified and directed by Eng-In-Charge.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured, 1100 volts grade heavy duty power cable,armoured, aluminium conductor,16 Sqmm 2 core cable flat or circular, laid in trenches or passing through pipe connecting suitable lugs etc. Complete all as specified and directed by Eng-In-Charge.

M&L for Sub class "B" bricks, old size 230x115x75mm, laid right angle and dry or width wise across the line of cable in treanchs as cable protection. Complete all as specified and directed by Eng-In-Charge.

Cutting of existing GI pipe line of size 25 mm dia and inserting new pipe line incld all fittings. Complete all as specified and directed by Eng-In-Charge.

S&F PP-R gate valve (brass inserted) of 25 mm bore. Complete all as specified and directed by Eng-In-Charge.

M&L Precast cement concrete block masonry with hollow blocks type C1 , 1:3:6 (using 16mm graded stone aggregate) masonry exc. 10cm in width and setting in cement mortar 1:6) Complete all as specified and directed by Eng-In-Charge.

S&F 15 mm bore bib tap, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe/ brass ferrule. complete all as specified.

S&F 15 mm bore stop valve concealed, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe/ unions complete all as specified.

M/S ABDUL MAJID LONE

M/s Riyaz Enterprises