Building

Name of Work :- Construction of Nandghar (Anganvadi) Building at Village Khalal Ta:Kathlal, Dist:Kheda

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 50.10 Cum 117.07

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

2 useful materials and disposing off the excavated stuffupto 50 Meter lead.(B) Dense or Hard soil 6.90 Cum 162.37

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

3 aggregates 20 mm nominal size) and curing complete Including cost of formwork and 10.40 Cum 3917.35

reinforcement for reinforced concrete work in (A) For PCC

Providing and laying Ordinary cement concrete work 1:1.5:3 (1- Cement : 1.5- Coarse sand : 3-

4 graded stone aggregates 20 mm nominal size) and curing complete Including cost of formwork 5.30 Cum 5256.15

and reinforcement for reinforced concrete work in (A) footings

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3- graded

stone aggregates 20 mm nominal size) and finishing smooth with,curing etc.complete

6 including the cost of formwork but excluding the cost of reinforcement for R.C.C work in (A) 10.70 Cum 8040.53

BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3- graded

stone aggregates 20 mm nominal size) for R.C.C lintel including finishing smooth with,curing

7 etc. complete including the cost of formwork but excluding the cost of reinforcement. 1.00 Cum 10589.43

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement : 1.5- Coarse sand : 3-

graded stone aggregates 20 mm nominal size) for reinforced concrete Chhajjas not exceeding

8 10cm. thickness upto floor two level including finishing the exposed surfaces with cement 0.70 Cum 6876.57

mortar 1:3 (1- cement, 3 Fine sand) to give a smooth and even surface centering and formwork

and curing complete excluding cost of reinforcement.

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3- graded

stone aggregates 20 mm nominal size) and finishing smooth with,curing etc. complete

9 including the cost of formwork but excluding the cost of reinforcement for R.C.C work in (B) 5.20 Cum 9062.91

COLUMNS: (ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Providing and Laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3- graded

stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of reinforsement for R.C.C work in (iii)

Slabs having more than 10 cm and upto 13 cm. thickness

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc.

11 in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 36.80 Cum 130.39

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

12 including watering, ramming and consolidating etc. complete. 23.30 Cum 282.02

Filling in plinth with sand under floors including watering ramming, consolidating and

13 dressing complete 4.00 Cum 460.18

Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 1.5 coarse snad, 3 graded

stone agggregate of 20 mm nominal size) and curing complete including the cost of formwork

and excluding the cost of reinforcement for reinforced concrete work for horizontal and

vertical R.C.C. fins.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

15 placing in position complete upto floor two level 3968.00 Kg 76.21

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional For GF

Half brick masonry in common brunt clay building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos of 6mm Mild

17 steel round bars after every three course embedded in Cement Mortar in foundation and plinth 23.60 Sqm 715.03

(B) Conventional

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive

18 material including dismentaling of existing flooring and jointed with color cement slurry 47.20 Sqm 1248.74

including finised with flush pointing & cleaning the surface etc. complete for light shade

Item Description Quantities Unit Item Rates Amount

Providing and laying Ceramic tiles 8mm thick in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing

in white cement including Dedo.

Providing and laying white glazed tiles 8mm thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

20 pointing in white cement. 9.10 Sqm 908.32

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 laid over and jointed with grey

21 cement slurry mixed with pigment to match the shade of slab including rubbing and polishing 7.50 Sqm 989.44

etc. complete. (A) 25mm thick

Providing and laying Black or Colour Machine Cut free edges, Machine polished Granite Stone

slab 18 mm thick single piece For Stair, Step, Landing, Skirting etc as per design including fully

moulded round front edge and 1cm nosing and necessary groove on trade of steps laid on

22 mm thick cement mortar 1:6 (1-cement : 6 coarse sand) jointed with grey cement slurry 11.90 Sqm 2942.91

including rubbing, polishing & Finishing etc complete as directed by Enginner in Charge.(Sill-

Jems & Cupboard)

Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 30 mm

thick Kota stone slab flooring fitting at bottom with cementing Materials / adhsives including

macking necessary grooves in walls with Vertical Kotastone 30 mm x 2 No sandwitch thick

23 every 60 cm centre to cenre including all labour material of approved quality incl. full moulded 2.00 Sqm 3089.46

round front edge fixed in wall for partition and jointed with grey cement slurry including

rubbing and polishing etc. complete .

Providing and Fixing Windows with 40 X 40 X 5 mm. iron angle & frame 30 X 30 X 4 mm. size

in Double Shutter with 1 mm thick MS plate with hold fasts, iron hinges, handles, stopper,

24 locking arrangement etc. comp. Steel welded is built up section cutting hoisting, finishing in 12.20 Sqm 3963.64

two coats of oil painting over coat of prime coat etc. complete.

Providing and Fixing 32mm thick decorative flush Door shutter (Shutter fixing to Stone frame)

of approved quality and design consisting of both side 1.00 mm thick texture laminated flush

25 door in single piece, all edges shall be covered with teak wood beading incl. required fitting 4.00 Sqm 4001.62

and fixtures of S.S.,cylindrical lock system with all labour, tools materials as directed by

Engineer-In-Charge.

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for

stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a coat of steel primers

of approved make and manufacture, M.S. frame shall be covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for

top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross

PVC sheet as gap insert for top rail and bottom rail, Panelling of 5 stiles and rails with 30mm

wide x 5mm thick PVC sheet beading on eighter side, and joined together with solvent cement

adhesive,. An additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side

of the ‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer

in charge, manufacture’s specification and drawing.

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) including scaffolding curing etc. complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give

29 an required shape even shade after thoroughly brushing the surface to remove all dirt, and 126.40 Sqm 114.53

remains of loose powdered materials.etc complete

Applying two coats of acrylic laphy (putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly brushing the

30 surface free from mortar dropping and other foreign matter and sand papered smooth as per 129.50 Sqm 40.59

instruction of Engineer in charge & approved make.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.smooth.

Painting (Bala Painting) undecorated wall surface to give an even shade including throughly

32 brushing the surface free from mortar droppings and other foreign matter and sand papered 30.20 Sqm 407.03

smooth. on walls shade and pattern as directed by Architect and Authority.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

33 the help of clamp at every two metre C/C or shall be concealed as directed including necessary 30.00 Rmt 72.65

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Item Description Quantities Unit Item Rates Amount

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

34 the help of clamp at every two metre C/C or shall be concealed as directed including necessary 39.00 Rmt 91.84

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

35 the help of clamp at every two metre C/C or shall be concealed as directed including necessary 18.00 Rmt 195.67

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Provision and fixing water closet squatting orissa type W.c. pan size 580mm integral footrest

and 100 mm P or S trap and in cluding 25 mm dia CP brass flush valve and GI inle connection

etc. comp. (A) Vitreous china long pattern white or color.

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with

C.I or M.S brackets painted white including cutting holes and making goods the same including.

C.P. brass waste Couplin, and waste pipes and bottel trap (A) Vitreous china. (ll) Flat back

washbasin 550 mm x 400 mm size (1) in colour

Providing and fixing Gun metal check or non return fullway wheel valve.(A) 15mm dia.

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws

41 down Bib Tap. (i) 15mm dia. 3.00 Each 186.83

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Construction of Septic Tank (1.5m x 1.5m x 1.5m) using hollow brick masonary wall, covering

with preast RCC slab including jointing the slabs with pointing and providing 110 diametre

43 U.P.V.C (Type B) Connecting the line upto Manhole etc. complete 1.00 Each 11939.29

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

Providing & Fixing S.W. Gully trap with C.I. Greating brick masonay chamber and water tight

C..I Cover with frame of 300 mm X 300 mm Size ( Indian ) with standard weight (i) Square

mouth traps (C) 150 mm x100 mm size P or R Type.

Providing erecting and fixing double coated ISI water tank of required capacity each with all

46 necessary fittings and connection etc. complete on terrace. 1000.00 Liter 3.95

Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size 610 x

mm & bowl size 560 x 410 x 200 with single hole for pillar tap Fixing in sanwich platform

47 including cutting holes and making goods the same, 15 mm dia pillar tap. Stop cock 15 mm 1.00 No 3158.03

dia, necessary fixtures, connections and waste pipes etc complete.

Providing , Painting ,Lettering Nandghar Logo Board As Pe Design Specified And Providing

Two Direction Side Of the Building Photograph Copies -4 Of Each In Postcard size og the

Completed Work As Directed 23Cm x 45 Cm.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix

49 (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 2.00 Each 2932.93

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Providing and Fixing FIRE EXTINGUISHER 6 KG ABC including cost of labour complete with

50 providing 1 year guarantee for each bottle including testing and comissioning. 2.00 No 2550.25

Providing and fixing M.S. grills/ Railing /MS ladder of required pattern to M.S. frames of

windows ,Door , Jali etc. with M.S. flats at required spacings and frame alround, square or

round Bright bars of 12mm dia, with round headed bolts and nuts or by screws including

all Fixture etc complete as directed by Engineer in charge

Item Description Quantities Unit Item Rates Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected oncealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

53 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 4.00 Point 654.48

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling completeCat- II

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured /

54 metallic/white front plate modules erected on / in wall / ceiling with following type 2.00 Point 236.34

accessories Cat- II

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Belowdescription have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacitybetween the ranges shown.) (A) Tube Light with integral driver (iii) 18-20

Watts, Surge - 2KV,IP-20, conventional 4 feet cat-II

Providing & erecting open well type horizontal mono block pump set with stainless steel body

having following specification (A) 0.5 H.P. single phase open well motor pump set having

57 discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia.delivery pipe with control panel 1.00 No 9362.70

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark Cat-ll

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA

59 breaking capacity & confirms to IS : 8828 in existing box having following capacity 1.00 No 278.76

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of

60 same company of MCB to be used) suitable for (A) single phase incoming and horizontal single 1.00 No 1492.78

phase outgoing (b) sheet steel double door (IP-43) (iv) 12 Way

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and Erecting following Shock Proof Tissino Type accessories erected on 3 mm thick

62 PC (Polycarbonate) Sheet in PVC / Metal Box erected on Wall / Ceiling. (14) Electronic Hum 2.00 No 219.17

Free EME Socket Type Step Fan Regulator.

Supplying Erecting Aproved make Bracket Fan of ISI Mark with 230 Volt A.C., 50 Cy/S 400/450

63 mm Sweep complete on Wall or With lead cores and connections complete. (Make shall be 1.00 No 2105.85

Approved by Engineer in Charge)Category II.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG

64 erected & connected as directed. For using salt and charcoal / coke as required for pipe type 1.00 No 994.85

Mains with 1.1 KV FRLS PVC insulated ISI Marked Standard Copper Conductor wire in

following Type of Pipe to be erected Concealed in / Flushed on Wall / Ceiling with 1.5 Sq.mm

65 Copper Conductor FRLS PVC Insulated Standered wire of Green Colour for Earth continuity of 30.00 Rmt 62.62

following size. (A) With Medium Class Rigid PVC Pipe and Accessories. (a) 2 wire 1.5 Sq.mm.

Item Description Quantities Unit Item Rates Amount

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

67 approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and 3.60 Sqm 686.90

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and Placing IT wood writing table having size 1.50 X 0.75 X 0.75 mt with one side

drawer with using of 19mm thick WP wood, top cover with 1 mm thick wood type Formica

68 including using of all necessary material & labour etc completed as directed by Engineer 1.00 No 15150.00

Providing and Fixing pin cushion display board having size 1.20 X 0.75 mt including using of

alluminum section frame, 18mm thick WB plywood, nevy blue Cushion cloth pin etc completed

as directed by Engineer Incharge.

Providing and fixing of hook of 10mm or 12mm dia including drilling hole, fixing of male-

female thrade fastner sealing the same with appoxy compound, finishing the same etc

complete as directed by Engineer incharge.

Providing and fixing medical device & equipment standio meter height measuring scale

2.10mt long including fixing in wall with using of all heavy SS screw, rail etc complete as

directed by Engineer incharge.

Providing and fixing Pre writing board having size 30cm X 20cm with decorative acralic

72 border etc completed as directed by Engineer incharge. 13.00 No 404.00

Providing and supplying standard PVC (Polyvinyl chloride) Chair with handle of approved

73 design and make as directed by Engineer incharge. 3.00 No 1010.00

Providing and supplying standard PVC (Polyvinyl chloride) Stool having size 3.75 X 0.60 X

74 0.45mtr of approved make as directed by Engineer incharge. 3.00 No 606.00

Supplying & erecting approved LED TV 32Inch ,230V,Resolution: 4K Ultra HD (3840 x 2160) |

Refresh Rate: 60 hertz,1 TV Unit, 1 Remote, 2 Table Stand, 1 User Manual, 2 Batteries,1

Warranty Card Connectivity Technology Wi-Fi, USB, Ethernet, HD Connectivity: 3 HDMI ports

to connect set top box (1HDMI port eARC supported) | 2 USB ports to connect hard drives and

other USB devices | Built- in WiFi | Bluetooth | Ethernet RJ45 | 1 earphone Jack | 1 Optical

digital audio output (SPDIF) | 1 RF- Radio frequency input | 1 AV input Sound: 24W Audio

Output | Dobly Atmos | Audio equalizer | Dolby Digital | Lip-sync adjustment | Sound

75 mode:Standard, Theatre, Sports, Music, Speech, Late Night Smart TV Features: Google TV | 1.00 No 25250.00

Google Assistant | Voice command | Screen mirroring: DLNA, Chromecast, Miracast, AirPlay |

Sleep Timer | On/Off Timer | Supported Apps: Netflix, YouTube, Prime Video, Hotstar, SonyLiv,

Hungama, JioCinema, Zee5, Eros Now

Display: 178 drgrees wide viewing angle | VRR | ALLM | MEMC | HDR 10 | HLG | Dolby Vision |

Multiple picture modes supported: Dynamic，Standard，Sports，PC/Game，Energy

Saving，Cinema，FILMMAKER MODE Warranty Information: 2 Year Comprehensive

Warranty on product provided by Toshiba from date of purchase

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter

76 auto low & high pressure switches with following size of storage tank & LPH capacity & 1.00 No 9595.00

erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Providing and fixing PVC modular kitchen cabinet consisting of base and wall units, made from

high quality rigid PVC boards (minimum 15-18 mm thick), including shutters, shelves,

77 drawers, SS hinges, telescopic channels, handles, magnetic locks, necessary fittings, cutting, 2.40 Sqm 7575.00

fixing, complete as per design and direction of

Providing and Fixing SS 304 Foldable Checking bed having size 1.50 X 0.60 X 0.75 mm

including using of 25mm dia pipe, SS 2mm thick, matter of 25.4 (1") of 40 density, cover with

regine cloth of approved quality etc completed as directed by Engineer

Providing and Fixing of SS 304 Hanger for bag including using all necessary materials like SS

79 rail, screw etc completed as directed by Engineer lncharge. 10.00 No 252.50

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent (Should be written in figures and words) of the estimated rate mentioned

above. Amount of My\Our tender works put as under.

Estimate Amount Estimate Amount

Put to tender Rs___________ Put to tender Rs___________

Item Description Quantities Unit Item Rates Amount

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division

Kapadvanj Kheda