Repairing and Maintenance Work of Various Municipal Anganwadi Buildings at T.P.S. No. 39,( Limbayat - Udhana ), T.P.S No.40 ( Limbayat - Dindoli ) ,T.P.S. no 19 ( Magob ) in South East Zone (Limbayat), Surat.

Name Of Work :- Repairing and Maintenance Work of Various Municipal Anganwadi Buildings at T.P.S. No. 39,(

Limbayat - Udhana ), T.P.S No.40 ( Limbayat - Dindoli ) ,T.P.S. no 19 ( Magob ) in South East Zone (Limbayat),

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Demolition including stacking of serviceable

materials with all lead and lift. (i) RCC Work

Demolition of brick work and stone masonry including stacking of

2 2 18 serviceable materials and disposal of unserviceable materials with all lead 100.00 C.M. 550.40

and lift. (i) On Cement Mortar.

Removing and scraping of old deteriorated

plaster of any thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site of work with

all lead and lift.

Dismentling steel work including distempering and stacking the maerials

with all lead and lift

Dismantling door, windows, ventilators etc.

(wood or steel) shutters including chowkhats architraces, holdfasts and

other attacement etc. complete and stacking them within all lead and lift.

(i) Not exceeding 3 Sq.M. in area.

Dismentling door, windows, ventilators etc. (wood or steel)shutters

including chowkhats architraces, holdfasts and otherattacement etc.

complete and stacking them within all lead and lift. (i) Exceeding 3 Sq.M.

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys,Gutters etc.

7 11 18 stacking of serviceable materials and disposal of unserviceable materials 5.00 S.M. 47.72

with all lead and lift. (i) G.I. sheet roofing.

8 12 18 Kota stone flooring and steps 10.00 S.M. 47.72

10 14 18 Tiles flooring / Dedo 10.00 S.M. 47.72

11 15 18 Granite flooring and steps 25.00 S.M. 47.72

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with

12 16 fittings and clamps including stacking the materials with all lead and lift.

(for any dia, of pipe)

18 22 18 UPVC pipe 20.00 Rmt. 74.77

Dismentling wood work, wrought framed and fixed in frames trusses

including stacking the materials with all lead and lift.

Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in

20 24 18 base and making good the disturbed fround stacking useful materials as 200.00 Rmt. 66.81

directed and disposing as directed and disposing of the unserviceable

materials with all lead and lift.

Dismantling sanitary fittings like wass basin, W.C. pan Indian and

21 25 18 European type, flushing tank etc. including stacking the materials with all 20.00 EACH 405.65

Excavation for foundation includ.sorting out & stacking of useful materials

& disposing of the excavated stuff upto 50 mt. Lead & all lift, watering

etc. Comp. (A) Loose or Soft soil Executed With Mechanised Efforts /

Excavation for foundation includ.sorting out & stacking of useful materials

23 & disposing of the excavated stuff upto 50 mt. Lead & all lift, watering

etc.Comp. (A) Loose or Soft soilExecuted With Manual Labours

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone

25 3 1 agg. 40 m.m Nominal size )& curing comp. excl. cost of from work in 0.00 C.M 2517.44

:Foundation &Plinth

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8

26 4 1 graded stone agg. 40 mm nominal size) & curing comp. excl.cost of form 10.00 C.M 2680.21

work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

27 5 1 agg 20m.m Nominal size)&curing comp. excl. cost of form work in :(a) 10.00 C.M 3005.76

foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work

exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work

in : Up to G.L./P.L. (A) COLUMNS

(1)Having c/s area up to 0.08 s.mt 2.00 C.M 12,632.60

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 11,166.97

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 9201.68

(1)Having c/s area up to 0.08 s.mt 2.00 C.M 9,102.61

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 8174.41

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 7086.88

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

30 8 1 work incl. bending, binding & placing in position etc. comp. Upto 150.00 KG 76.21

Brick work using common burnt clay building bricks having crushing

31 9 1 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement 15.00 CM 4237.00

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Filling available excavated earth (excluding rock) in trenches. plinth, sides

of foundations etc. in layers not exceeding 20 cm. in depth consolidating

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

33 11 1 20cm. thickness including watering, ramming and consolidating etc. 10.00 CM 289.06

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

35 13 1 Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work

(1)Having c/s area up to 0.08 s.mt- Ground Floor 3.00 CM 12632.60

First Floor 3.00 CM 12672.24

Second Floor 0.00 CM 12711.88

Terrace (third) Floor 0.00 CM 12,751.53

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 0.00 CM 11166.97

First Floor 0.00 CM 11206.61

Second Floor 0.00 CM 11,246.25

Terrace (third) Floor 0.00 CM 11285.89

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 CM 9201.68

First Floor 0.00 CM 9241.32

2 Second Floor 0.00 CM 9280.96

Terrace (third) Floor 0.00 CM 9320.61

(1)Having c/s area up to 0.08s.mt- Ground Floor 2.00 CM 9102.61

First Floor 2.00 CM 9142.25

Second Floor 0.00 CM 9181.89

Terrace (third) Floor 0.00 CM 9221.53

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 0.00 CM 8174.41

First Floor 0.00 CM 8214.05

Second Floor 0.00 CM 8253.69

Terrace (third) Floor 0.00 CM 8293.33

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 CM 7086.88

First Floor 0.00 CM 7126.52

Second Floor 0.00 CM 7166.16

Terrace (third) Floor 0.00 CM 7205.81

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 0.00 CM 7984.42

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

First Floor 0.00 CM 8024.06

Second Floor 0.00 CM 8063.70

Terrace (third) Floor 0.00 CM 8103.34

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 0.00 CM 7396.96

First Floor 0.00 CM 7436.60

Second Floor 0.00 CM 7476.24

Terrace (third) Floor 0.00 CM 7515.89

(4) Slabs having more than 13 cm. Thickness -- G.F 0.00 CM 6813.01

First Floor 0.00 CM 6852.65

Second Floor 0.00 CM 6892.29

Terrace (third) Floor 0.00 CM 6931.94

(D) LINTELS: -- G.F 5.00 CM 9531.24

First Floor 5.00 CM 9570.88

Second Floor 0.00 CM 9610.53

Terrace (third) Floor 0.00 CM 9650.17

(E) CHAJJAS: -- G.F 0.00 CM 5512.83

First Floor 0.00 CM 5552.47

Second Floor 0.00 CM 5592.11

Terrace (third) Floor 0.00 CM 5631.76

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

36 14 2 curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : (A) Stair cases including

Ground Floor 0.00 CM 7380.20

First Floor 0.00 CM 7419.85

Second Floor 0.00 CM 7459.49

Terrace (third) Floor 0.00 CM 7499.13

(B) Vertical and horizontal fins

Ground Floor 0.00 CM 10831.75

First Floor 0.00 CM 10871.40

Second Floor 0.00 CM 10911.04

Terrace (third) Floor 0.00 CM 10950.68

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

incl. bending, binding & placing in position etc.comp.---Ground

First Floor 50.00 KG 77.21

Second Floor 50.00 KG 78.21

Terrace (third) Floor 0.00 KG 79.21

Brick work using common burnt clay building bricks having crushing

38 16 2 strengthnot less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- 20.00 CM 4,511.97

Cement : 6 -fine sand)(C) Fly Ash Bricks Ground Floor

First Floor 0.00 CM 4786.95

Second Floor 0.00 CM 5061.92

Terrace (third) Floor 0.00 CM 5379.24

Half brick masonry in common brunt clay building bricks having crushing

39 17 2 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 2.00 SM 625.53

coarse sand ) in foundation and plinth (C)Fly Ash Bricks.

Ground Floor 20.00 SM 678.86

First Floor 10.00 SM 685.11

Second Floor 0.00 SM 691.37

Terrace (third) Floor 0.00 SM 697.62

Uncoursed rubble masonary with hard stone of approved quality in

40 18 2 foundations and plinth in cement mortar 1:6 (1 Cement : 6 sand) including 0.00 CM 2500.01

leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement :

Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 SM 100.22

Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement :

3 Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 SM 108.81

Providing Rubble Pitching with hard stone of approved quality in cement

43 21 3 mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up ,Curing etc. 0.00 CM 2550.00

complete excluding pointing

Providing and filling rubbles including hand packing and filling interstices

with quarry spalls behind abutments and between returns as directed.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing upto floor two level precast cementconcrete jali or grill 1:2:4

mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal

45 23 3 reinforced with 1.6 mm dia. Mild steel wire including 0.00 SM 706.60

roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing

complete. (B) 40mm thick.

First Floor 0.00 SM 716.63

Second Floor 0.00 SM 726.65

Terrace (third) Floor 0.00 SM 736.68

Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

46 24 3 with a floating coat of cement slurry mixed with admixture of lime or 100.00 SM 189.79

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

First Floor 50.00 SM 217.93

Second Floor 0.00 SM 246.07

Terrace (third) Floor 0.00 SM 274.20

(B) For ceilings &soffits of stairs

Ground Floor 10.00 SM 214.60

First Floor 10.00 SM 242.74

Second Floor 0.00 SM 270.88

Terrace (third) Floor 0.00 SM 299.02

Providing & Applying 15mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

47 25 3 with a floating coat of cement slurry mixed with admixture of lime or 100.00 SM 237.51

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than

metres above ground level consisting of 12mm thick backing coat of C.M.

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1- sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on brick / concrete

work for plastering comprising of base coat 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

including scaffolding curing etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Providing throating or plaster drip and moulding it to R.C.C. chajja etc.

comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

Providing and laying precast terrazo tile 20mm thick white,black, white

and black (or of the colour specified in specification of tender item)

marble chips of sizes upto 6mm laid in floors, treads of steps and landings

on a bed of 25mm average thickness of Lime mortar 1:1.5(1-Lime putty :

1.5 coarse sand) or C.M. 1:6 (1:cement :6 - coarse sand) jointed with neat

cement slurry mixed with pigment to match the shade of tiles including

rubbing and polishing complete with precast tiles of.(A) Light shades

using white cement

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

51 33 4 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 20.00 SM 1076.94

pigment to match the shade of slab including rubbing and polishing

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

52 34 4 steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 10.00 SM 857.42

finished with flush pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of

52 35 4 steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary 10.00 SM 887.64

cement paste for fixing and joined with white cement slurry etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

53 36 4 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 10.00 SM 914.69

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and

53 37 4 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 10.00 SM 987.86

jointed with white cement slurry

Providing & laying marble stone slab flooring over 20 mm.av. base of

54 38 4 C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey cement slurry incl. 10.00 SM 2139.56

rubbing & polishing comp.(A) Marble slab 25 mm. Thick.

Providing & laying granite slab 18mm thick in flooring, treads of steps and

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse

54 39 4 sand) or lime mortar 1:1.5 laid and finished with flush pointing in white or 100.00 SM 2410.00

colour cement including rubbing and polishing complete. ( Basic Rate:-

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

55 41 4 nessary adhesive material and finished with flush pointing in white or 50.00 SM 2026.00

colourcement, including rubbing & polishing comp.. (Basic Rate:-

56 42 4 Labour Charges For Edge Finished For Granite 100.00 RM 43.43

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm (Average) base of cement mortar

Cement : 6 Coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

57 44 4 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 10.00 SM 1040.35

(1 cement : 3 coarse sand) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

58 45 4 risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 10.00 SM 1081.71

coarse sand) and jointed with white cement slurry.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring

59 46 4 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 10.00 SM 1484.61

(1 cement : 3 coarse sand) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting

60 47 5 risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 10.00 SM 1,538.85

coarse sand) and jointed with white cement slurry.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and laying chequered precast concrete tiles 22mm thick with

aggregate of sizes upto 6mm in floors treads of steps and landing on 20mm

61 48 5 thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 0.00 SM 528.01

sand) jointed with neat cement slurry with pigments to match the shade of

Providing and laying rough chiseled dressed stone flooring over 20mm

thick base of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5

including pointing with cement mortar 1:2 (1 cement : 2 stone dust) etc.

Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 course

63 50 5 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer

finished with a floating coat of neat cement

(A) 40mm thick 10.00 SM 303.84

(B) 50mm thick 10.00 SM 356.33

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate

shall be as per approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor.

65 52 5 Same as Above But Without Frame 20.00 SM 2520.00

Providing & fixing 35mm.th. Indian teak wood shutters for doors,

windows & clearstory windows incl. Indian teak wood frames of finished

66 53 5 size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings incl. 20.00 SM 5533.68

Primer coat of approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 0.00 SM 5185.03

(C) Fully Galzed 0.00 SM 4,551.69

Providing and fixing 35mm thick shutters for Doors, windows and

67 54 5 clearstory windows including anodised alluminium butt hinges with 10.00 SM 3941.37

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in

situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures.

The whole FRP frame & shutter is to be water proof weather proof,termite

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges

with fastener sleeve & alluminium fixtures & fastentings.

Providing and fixing FRP of 35mm thick Fiber Glass shutter with 1.5 to

2.0 mm thick fire retardent grade FRP skin in depressed panel design

having extra reinforcement on sides & edges & in Gel coat finish. The

core of the shutter is to be filled up with injected retardent grade

69 56 5 polyurethane foam done in situ alongwith embedded wooden pieces for 0.00 SM 1269.63

stiffening & also taking hinges & fintures. The whole FRP frame & shutter

is to be water proof ,weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws

& alluminium fixtures & fastenings.

Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

square or round bars with round headed bolts & round headed bolts and

nuts or by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain

grill For all Floors

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

71 58 5 with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel 20.00 SM 5865.10

pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent

72 59 5 to shpe with hooked ends to RCC slabs curing, layig including painting the 20.00 EACH 129.02

exposed portion of loops, all as per standard design complete.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag

shall be as recommended by the manufacture of the water proofing

material, concrete

work for top, bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C 1:4:8

for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C.

pardi as per design, 10mm.th. water proofing cement plaster in C.M. 1:3

finishing,watering etc.Comp.to all inner face & bottom of tank curing etc.

comp. incl. Locking arrangement, outlet, inlet, overflow & wash out pipe

arrangement as necessary & C.I. Cover 0.60 x .045 weight not less then

etc. com. as per structural drawing excluding Steel & as directed by

Underground tank 20000.00 lit 5.46

Providing and filling in depressions of Bath and W.C. At all floor levels,

74 61 6 after completing plumbing work of pans, pipes,traps etc.with cinder or fly 10.00 CM 500

ash as directed by Engineer in charge etc. comp.

NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of : (a) I course of applying cement slurry @ 4.4 kg/sqm mixed

proofing compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

confirming to IS:2645 about 25 mm. th' in the floor of the depression &

about 18mm th' On the side walls of the depression up to the floor level,

water proofing plaster about 18 mm. th' be continued on the walls above

the floor level for a height of 600 mm. with surface suitable to receive

further treatment (c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement

consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed

6 proprietary water proofing compound conforming to IS:2645 ,brick bats is 50.00 SM 511.00

finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added

special water proofing compound confirming to IS:2645 & top smooth

with trowel with false chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other adjoining wall up

height of about 300 mm in a shape of quarter round vata Incl. curing etc.

Comp. With average thickness of 120 mm and minimum thickness at

as 65 mm.(c) The whole terrace so finished shall be flooded with water for

period of two weeks for curing and for final test. All above operations to

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Proiding & laying water proofing treatment to vertical and horizontal

surfaces like consisting of (a) I course of applying cement slurry 4.4 kg per

sq.mt. mixed with water proofing compound confirming to IS:2645 in

rcommended proportions. (b) II corse of 20mm cement plaster 1:3 mixed

water proofing compound in recommended proportion (c) III course of

76 6 applying blown or / resideal bitumen applied hot at 1.7 kg per sqm of area. 20.00 SM 505.00

IV course of 400mm micron th. PVC sheet. (Overlaps at joints of PVC

should be 200mm wide and pasted to each other with bitumen about

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length

Providing & fixing at all floor levels,both face polished machine cut edge

78 65 6 green kota stone slab (30mm) for urinal partition joined with grey cement 20.00 SM 900

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

Providing & fixing at all floor levels,both face polished machine cut edge

Marble slab for urinal partition joined with grey/White cement slurry (1:1)

incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs.

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern of approved colour For all

Providing and fixing Wash Down Water closet European type W.C. pan

81 68 7 integral P or S trap including jointing the trap with soil pipe in cement 10.00 EACH 1,303.71

mortar 1:1 (1 cement : 1 find sand) (seat and cover to be measured and

paid for separately) (A) Viterous china pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash down water closet

with C.P. brass hinges and rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor

levels, with C.I. or M.S. Brackets painted white incl. cutting holes &

making good the same incl. fittings such as pillar tap, capstan head screw

83 70 7 down high pressure with screws, shanks & back nuts, C.P. Brass waste 20.00 NO 2059.93

trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous china

flat back wash basin

mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the

84 71 7 Urinal with waste pipe, tap etc. complete. (A) White earthenware flat back 5.00 EACH 1036.27

or corner type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

85 72 7 levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to 10.00 NO 833.73

wooden plugs with C.P.brass screws and washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight C.I. cover with frame of 300mmx300mm size

86 73 7 (inside) with weight includ. plastering smooth inside & outside 15mm. th' 5.00 NO 1292.19

in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size -

(B) 150mm x 100mm Size- P Type 0.00 NO 1246.92

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size

(inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3

etc. comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 0.00 NO 1053.20

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

x 610 mm & 450 mm deep sewer trap chamber with 23 cm th' B.B.

walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside &

outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 &

fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp.

for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 EACH 222.71

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover

frame to be not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 EACH 242.39

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M.

90 77 7 1:1 of following nominal internal diameters incl. Testing of pipes and

joints etc. Comp

Providing & laying in trenches galvanised mild steel tubes(medium grade)

TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal

fittings etc. comp..- 25mm.dia.

Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild

steel tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE

following nominal bore, tube, fittings & clamps incl. making good the wall

ceiling and floor etc. complete.

Providing & Fixing C.P. Brass screw down bib tap at all floor levels,

polished bright etc. comp.-(A) 15mm dia. For all Floors

Providing & Fixing gun metal check or non return full way wheel valve at

all floors levels, etc. complete. (A) 15 mm. dia.

Providing & Fixing chromium plated brass half turn flush cock at all floor

levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities directed etc.

comp. (A) 25 mm. dia.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having

weight not less than 35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type

"B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

97 84 8 discharge system at all floor levels incl. All fixtures like bends, tees, shoe 100.00 RM 412.00

etc. jointed with resin of approved brand & manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all

levels incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40)

line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be fixed

wall the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

bends, tees, shoe etc joined with resin of approved brand & manufacture

100 87 8 etc. comp. Pipe shall be fixed on the wall the help of clamp at every two

or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110

mm diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

Providing & fixing M.S. Holder Bat clamps at all floor levels of approved

103 90 8 design to C.I. Or S.C.I pipes including the cost of cutting holes & making 20.00 NO 30.00

good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of

104 91 8 approved design to C.I. Or S.C.I pipes including the cost of cutting holes 50.00 NO 20.00

& making good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI)

105 92 8 mark water tank of required capacity each with all necessary fittings & 30000.00 LIT 3.95

connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

106 93 8 concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3

coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 20.00 RM 173.00

(B) 100 mm /110 mm PVC PIPE 20.00 RM 180.00

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal

of the surplus excavated soil as directed within a lead of 50 M. For

diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work

in : Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 5.00 C.M 12123.79

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 10658.16

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 8692.87

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

(B) BEAMS : C.M

(1)Having c/s area up to 0.08s.mt 3.00 C.M 8593.80

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 7665.60

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 6578.07

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone

110 97 9 agg. 20 m.m Nominal size)& curing comp. incl. cost of from work in: wall 10.00 C.M 3982.62

Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or

angle cleats as in main & cross beams,hip & trussed purlins connected to 20.00 QTL 9047.86

common raffers & the like

(B)For work like chain link fencing, above compound wall etc. 20.00 QTL 9047.86

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 10.00 QTL 9711.53

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage

thick with nuts, bolts, washer or G.I. pins, excluding M.S. angles

etc.complete as per relevent IS specification & directed by engineer in

charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire

fencing with necessary barbed wire (12 x 14 guage, weight not less than

0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per

relevent IS specification.& directed by engineer in charge

Providing & fixing colouron galvaniced steel, zinc / aluminium allus

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook

bolts and bolt 8mm dia with bituman and impet washer filled with white

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I.

or G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I.

116 103 9 limpet washer or G.I. limpet washer. filled with white lead complete 20.00 SM 1016.00

excluding the cost of purlins, Rafters and Trusses. (1) 0.63 mm thick

sheet. (Tata / Jindal or equivalent)

Providing & fixing 150mm wide 450mm over all semicircular plain G.I.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water

pipes.(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I.

118 105 9 "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 15.00 R.M 641.94

complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular plain G.I.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water

pipes.(i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I.

120 107 9 "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 10.00 R.M 464.00

complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the

main cladding on both edges. All fixing holes must be predrilled oversize

as specified for the sheet length and fastener being used. Fasteners must be

fitted with approved washers. Fixings should be tightened to ensure a

weatherproof seal but they must not be over tightened Side-lap fasteners

121 108 10 must also be installed at specified centers with the FRP sheet having

clearance holes provided as per the main fasteners Weatherproofing shall

be provided at all flashing points under the normal flashing by the fitting

of a foam closure strip to match the profile being used. Closure strips will

be sealed to the sheet with an appropriate non setting silicone sealant.

Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 0.00 SM 992.00

(b) 2 mm thick 0.00 SM 1100.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet

is coated with an anti-UV Co-extrusion layer having good weather

can maintain its optical properties and mechanical performance for a long

time. Fasting is usually done by screws. , The fastening screws should be

122 109 10 inserted about 500 mm apart and 300mm apart Along the supporting

internal purlin and edge pulin.All fixing holes with diameter at least 2 mm

larger than screw must be predrilled into each screw location. The screws

should be 6mm diameter with length according to sheet thickness and

corrosion resistant, with at least heavy duty hot dripped galvanized or

stainless steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 0.00 SM 1261.00

(b) 2 mm thick Solid Sheet 0.00 SM 1510.00

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in

123 110 10 1:1.5:3 concrete also horizontaly in line and connecting to purline angle 10.00 RM 750.00

etc by welding rereting etc. (a) Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in

124 111 10 1:1.5:3 concrete also horizontaly in line and connecting to purline angle 10.00 RM 485.00

etc by welding rereting etc. (a) Medium duty "B" Class

Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to

12 mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak wood beading of 65 mmx

125 112 10 50mm size, rubbing & sanding comp., incl. applying two coats of black 5.00 NO 4193.00

board paint over a priming coat on plywood & French polishing the frame

all round etc. Comp. as per

instruction of Engineer in charge (M.R.)

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

18 mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green

126 113 10 0.8mm backside white laminate & with good Quality of adhesive with 5.00 NO 5195.00

appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx

50mm size, rubbing & sanding comp., as per instruction of Engineer in

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm

127 114 10 thick with appropriate fittings and Alluminium fittings comp., as per 1.00 NO 4230.00

instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table

top 18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock

century) commercial plywood with 1.0mm thick lamination sheet fitting

with teakwood moulding table top supported on 3" x 3" teakwood leg & 3"

teakwood framing top and bottom with french polish labour work hardware

etc. as per site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with

1.0mm thick lamination sheet table top supported on 2" x 2" teakwood leg

129 116 10 & make 3 nos. drawers of 1' 3" width on both side with necessary french 2.00 NO 8390.00

polish hardware labour etc. as per site incharge instruction and as per

drawing ( Size 4' x 2'-6" x 2'-6", all framing other then legs are teak wood

of size 2" x 1")

Providing & Fixing simple 12mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size

x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing

with necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine

131 118 10 of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag 0.00 NO 6745.00

support and horizontal simple 2" x 1" teakwood patti for magazine support

with necessary french polish hardware labour etc.as per site in charges

instruction and as per drawing.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing, supplying & placing precast RCC Woodeny benches as per

given specifications. (Seating plank dimensions : Seating Length of the

Bench : 1380 mm, Seating width of the Bench : 450 mm, Seating height of

the Bench : 450 mm, Seating plank thickness : 60 mm, Total height of the

Bench : 900 mm. ) M-30 grade of Concrete using

vibration compaction process. Benches consists of 2 Nos. L-shape base

support in wooden texture and 1 Nos. flate back and 1 Nos. bottom plank

leg thickness :90 mm, Leg hight : 830 mm, Leg width : 600 mm, backside

plank width : 350 mm, backside plank length : 1380 mm, backside plank

thickness : 60 mm.Bench top and back planks are treated with special

anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make surfaces

glossyand water proof.The back rest should show as details given by SMC

in embossed at casting time.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts

etc., of required size, on the top of the floor or the side of waist slab with

arrangement as per approval of Engineer-incharge, (for payment purpose

only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing Z - clamps at all floor levels of approved design to C.I.

S.C.I. or PVC pipes including the cost of cutting holes & making good the

Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 0.00 NO 90.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

Providing and constructing sandwitch type Polish Kota Stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish

Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota stone

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th.

plaster in 1:3 with finishing smooth with cement slurry as required and

Stainless Steel

sink of 0.45 mt x 0.45 mt size of approved quality and make with required

all fitings & fixitures etc. comp as per instruction given by site in charge at

Providing and constructing sandwitch type Granite stone cooking platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

Polish) of 1.25 mt. height & front granite stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

136 123 11 1:3 with finishing smooth with cement slurry as required and Stainless 5.00 RMT 3128.00

0.45 mt x 0.45 mt size of approved quality and make with required all

fitings & fixitures etc. comp as per instruction given by site in charge at all

(Basic rate of Granite Rs.1,200.00 / S.M.)

Providing and fixing 150 mm wide, approved quality chicken wire mesh

(FRP / PVC)at junction of brick work and RCC work or two dissimilar

137 124 11 surfaces, at all 10.00 SM 102.00

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

Providing and filling Epoxy grout of approved or suggested brand by

138 125 11 consultant / Engineer in charge in 4mm to 6mm thick tiles joint including 50.00 RMT 40.00

spacer with cleaning of joint by vacuum or blower etc

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all

tools, material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The

rate shall also include cost of drilling of hole of required diameter and

139 126 11 depth as mentioned in manufacturer's specification, cleaning the hole with

blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost

reinforcing bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as directed by the engineer-

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter locked together through their entire lenght and

jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and

etc. complete (A) Shutters having width below 3.5 M.

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter locked together through their entire lenght and

jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and

etc. complete. (B) Shutters having width 3.5 M and above

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on

vertical surface.Steel work welded in built up sections, framed work

142 130 12 cutting, hoisting, fixing in position and applying a priming coat of red lead 2.00 SM 2677.00

paint in beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams, hip & trussed purlins connected

to common raffers & the like.

Providing and laying broken china mosaic flooring for terrace using 12mm

to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto

cm along the wall clearing with water and oxalic acid etc. as directed.

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as

per Engineerin-

charge.TATA / JINDAL / ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500mm in lenght, 900mm height frame made out of

30mm x 30mm x 4mm angle from with cross supports for legs, welded

hooks and duly painted with one coat of red lead and two coats of

approved enamelled silver paint.

White Washing with lime on wall surface to give an even shade &

surface incl. throughly brooming the surface to remove dirt, dust

mortar drops & losse scales of lime wash & other foreign matter

(A) walls 0.00 S.M. 12.41

(B) Ceiling 0.00 S.M. 13.53

---do Extra Subsequant coat over above Item

(A) walls 0.00 S.M. 5.73

(B) Ceiling 0.00 S.M. 6.21

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Colour washing with lime on wall over & incl. a primary coat

of white washing to give an even shade & surface incl.

148 2 15 throughly brooming the surface to remove all dirt, dust mortar

drops & loose scales of lime wash & other foreign matter.Two

(B) Ceiling 50.00 S.M. 14.65

---do Extra Subsequant coat over above Item

(A) walls 100.00 S.M. 7.96

(B) Ceiling 50.00 S.M. 10.04

Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall

surface to give an even shade over and & including a

priming coat of alkali resistance primer of approved brand after

throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and

other foreign matter and also including preparing the surface even

(B) Ceiling 50.00 S.M. 80.35

---do Extra Subsequant coat over above Item

(B) Ceiling 50.00 S.M. 33.57

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

151 15 even shade including throughly brushing the surface free from 50.00 S.M. 79.39

mortar droppings and other foreign matter and sand papered

For every subsequent coat Extra over item no.above 50.00 S.M. 33.72

Distempering two coats on previously distempering

wall (without primer) with oil bound washable distemper of

approved brand & required shade on wall surface to give an

even shade after throughly brushing the surfaces clean of all

grease, dirt loose places of sceles & also including preparing

the surface even and smooth.

Applying Priming coat over new steel and other metal surface

after over and including preparing the surface by throughly cleaning

153 7 15 oil, grease dirt and other foreign matter and scoured with brushed 200.00 S.M. 35.00

fine steel wool, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt, dust

and other foreign matters.

Painting one coat (excluding priming coat) on Previously

Painted steel and other metal surface with synthetic enemal

9 paint, burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

For every subsequent coat Extra over item no.above 0.00 S.M. 38.18

Applying Priming coat over new wood & wood surface

after & incl. preparing the surface by throughly cleaning oil

grease dirt & other foreign matter sand papering & knetting

Really mixed paint brushing priming for enamel.

Painting two coats (excluding priming coat) on New wood

& wood based surface with enamel paint to give an even

shade & surface incl. cleaning of all dirt, dust & other foreign

Painting two coats (excluding priming coat) on previously

painted wood & wood based surface with enamel paint to give an

even shade & surface incl. cleaning of all dirt, dust & other foreign

Polishing with french polished on New wood & wood based

159 13 15 surface to give an even surface incl. cleaning the surface of 0.00 S.M. 135.70

all dirt, dust & sand papered smooth incl. a cost of wood filler.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Polishing with french polished on previously polishing

wood & wood based surface to give an even surface incl. cleaning

the surface of all dirt, dust & sand papered smooth incl. a cost of

Painting two coats of enamel paint over priming coat (including

priming coat) on wall after removing entire surface dirt, dust

foreign matter & also incl. preparing the surface even & sand

papered smooth etc. comp.(M.R.)

Painting two coats of enamel paint (Excluding priming

coat) over previously painted wall after removing entire

surface with even shade & surface after removing dirt, dust

foreign matter etc. comp.(M.R.)

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects

and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

163 17 16 chalk, grease, fungi, algae and flaking paint. This can be achieved 2000.00 S.M. 82.00

by brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-

5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

Providing and fixing extruded aluminium window having

extruded aluminium Powder Coated section frame main outer size

127 mm x 38.10 mm x 1.35 mm (of Jindal section no.2443, @

Wt. 1.384Kg/mt) horizontal Four track member size

122.20 mm x 31.75 mm x 1.10 mm (of jindal section no:8935, @

Wt. 1.398 Kg/mt.) with sliding shutters of horizontal member

164 1 17 size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ 20.00 S.M. 2140.33

Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section

@ Wt. of 0.457 Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminium fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details

etc. complete for window.

(A) Same as above but Colour anodized 20.00 S.M. 2140.33

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three

track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section

no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with

165 2 17 sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 5.00 S.M. 1591.87

mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings

& fixtures and transparent silicon sealant glass fixing to frame as

per details etc.

(A) Same as above but Colour anodized 20.00 S.M. 1591.87

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float

glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

(A) Same as above but Colour anodized 20.00 S.M. 1705.67

Providing and fixing standared extruded of aluminium section

of size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @

167 Wt. 0.471 Kg per mt) with colour powder coated alluminium 5.00 S.M. 2414.00

frame for Lovered Glass ventilation with 4 mm thick Figured

glass as details etc. complete for ventilation.

(A) Same as above but Colour anodized 20.00 S.M. 2414.00

Providing and fixing standared extruded of aluminium section

of size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @

168 5 17 Wt. 0.471 Kg per mt) with Powder Coated alluminium frame 3.00 S.M. 2336.00

with 5 mm thick transparent bronze colour tinted float glass as

details etc. complete for fix window.

(A) Same as above but Colour anodized 20.00 S.M. 2336.00

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

, Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section having size 83.5 mm

x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

169 6 17 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 5.00 S.M. 3237.00

kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal

Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet

glass in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by Engineer-in-

charge including

fixing brass pivot, handle, lock etc. complete.

170 (A) Same as above but Colour anodized 3.00 S.M. 3237.00

Providing & fixing Powder Coated Aluminium partly glazed and

partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear

float glass of approved make including all other necessary fittings

and fixtures. Entire work will have to be made water proof using

necessary rubber sectioned wherever required. Gaps all round the

frame to be filled with approved water proof sealent. Bottom portion

of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as

(A) Same as above but Colour anodized 5.00 S.M. 2400.00

Providing & fixing C.P. brass pillar cock with copper

connection,C.P. brass screws complete

Make- Cera, Parry ware, HindWare, Jaquar 15.00 NO. 1423.00

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera, Parry ware, HindWare, Jaquar 15.00 NO. 1323.00

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera, Parry ware, HindWare, Jaquar 15.00 NO. 1755.00

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera, Parry ware, Jaquar ,HindWare,Jaquar 3.00 NO. 2110.00

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and

brass flange complete, including cutting and making good the wall

where required.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Make- Cera, Parry ware, HindWare, Jaquar 20.00 NO. 1432.00

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera, Parry ware, HindWare, Jaquar- 350 x 500 x 390 mm 20.00 NO. 3282.00

Providing & fixing Wash Hung basin with single hole for pillar tap

Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera, Parry ware, Jaquar ,HindWare,Jaquar 5.00 NO. 2656.00

Providing & fixing white vitreous china urinal of size 450 x325mm as

per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

178 8 21 spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- Cera, Parry ware, Jaquar ,HindWare 5.00 NO. 2476.00

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow

179 9 21 with Overhead Shower arm 200 mm with wall flange

Make- Cera, Parry ware, Jaquar ,HindWare 2.00 NO. 1569.00

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 890.00

Providing & fixing S.S.towel rail of 600 mm long approved make

181 11 21 including, providing & fixing C.P. brass screws, making holes in

walls & making good.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 1043.00

Providing & Fixing stainless steel recessed type Soap dish of

182 12 21 approved make. Including providing & fixing screws,

washers,cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 793.00

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at

all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S"

183 13 22 trap for water closet squatting pan joining the trap with the pan &

soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera, Parry ware, Jaquar ,HindWare 20.00 NO. 3275.00

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 971.00

Providing & fixing white vitreous china Ladies urinal of size

470x360X100 mm and 15mm dia. C.P. spreader, and pipe to wall

complete including cutting and making good the walls and floors wherever

Make- Cera 4040101, Parry ware C0503, ,HindWare 60003 0.00 NO 2233.00

Providing & fixing Paper holder with flap guard of 150 mm long approved

186 16 22 make including, fixing C.P. brass screws, making holes in walls & making

Make- Cera f5002110, Parry ware T6005A1, Jaquar AHS-1551

,HindWare F890003

Providing & Fixing pressmatic bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1 , Jaquar PRS-043

,HindWare F310016

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

189 19 22 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

,HindWare F650013