EXECUTION OF WORK UNDER OW (Development and Maintenance Modern Building) to Upgradation and modification of Circle office building Purattatva Bhawan at Mandvi, Vadodara

Amount

Execution of work under following items

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Including all the materials & labour charges etc. complete as direction by site in charge)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) (Including all the materials & labour charges etc. complete as direction by site in charge)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. (Including all the materials & labour charges etc. complete as direction by site in charge)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. (Including all the materials & labour charges etc. complete as direction by site in charge)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. (Including all the materials & labour charges etc. complete as direction by site in charge)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(Including all the materials & labour charges etc. complete as direction by site in charge)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Including all the materials & labour charges etc. complete as direction by site in charge)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Size of Tile 600x300 mm or 900mm X450mm as per approved by HOD. (Including all the materials & labour charges etc. complete as direction by site in charge)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge. (Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Including all the materials & labour charges etc. complete as direction by site in charge)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to f loor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Including all the materials & labour charges etc. complete as direction by site in charge)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Including all the materials & labour charges etc. complete as direction by site in charge)

Cantering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. (Including all the materials & labour charges etc. complete as direction by site in charge)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.(Including all the materials & labour charges etc. complete as direction by site in charge)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.(Including all the materials & labour charges etc. complete as direction by site in charge)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Including all the materials & labour charges etc. complete as direction by site in charge)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20 mm nominal dia Pipes. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 32 mm nominal dia Pipes. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 40 mm nominal dia Pipes.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing plasticized PVC connection pipe with brass unions : 45 cm length,15 mm nominal bore. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing white vitreous chinawall hang type water closet (555X360X380/ 480X360X350 mm) (European type W.C. pan) with seat and lid, 10 litre low level concell without fram P.V.C. flushing cistern, including flush pipe, with manually controlled device (push lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (make - parryware, hinware, jaquar as approved by HOD). (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing white vitreous china flat back or wall hang type lipped front urinal basin of 280X305X385 mm or 280X335X465 mm sizes including flush pipe and spreader with all fittings ,including cutting & making good the walls. (make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing counter top wash basin with C.I. brackets, C.P. brass tall pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the granite wherever require: White Vitreous China Wash basin sizes 550X360X180 mm or 450X330X130 mm with a pair of 15 mm C.P. brass pillar taps (make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing 2 Way Bib Cock with Wall Flange(make - parryware, hinware, jaquar Essco as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing Health Faucet of approve quality.(make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing C.P. brass one way anguler cock of approved quality conforming to IS:8931: 15 mm nominal bore (make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing C.P. brass Concealed stop cock of approved quality conforming to IS:8931: 15 mm nominal bore (make - parryware, hinware, jaquar as approved by HOD)(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing & Fixing Necessary fittings like Mirror of suitable size ,Towel ring , Liquid container , Soap Container, Holder for hand shower, toilet paper holder , hooks, holder etc. as per requirement for bathroom including all charges complete as per direction Details: 1)TowelRail 600mm Long, Stainless Steel (Essco AEC- ll11N) - 01 no. 2)TowelRingRound (EsscoAEC-1121N)- 01 no. 3) Soap Dish (Polycarbonate) (EsscoAEC-1133)-01 no. 4) Toilet Paper Holder (Essco AEC-1151N)- 01no. 5) Double Coat Hook (Essco AEC-1161N)- 01no. 6) Wash basin mirror - 01 no.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing of glass pertion for gents urinal including all complete.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC SWR pipe for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all necessary specials and fittings (cinfirming to IS:14735) i.e. bends, tees, junctions (with or without door), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/celling/floor level support by hangers etc in cocealed/ inside duct/under floor & basement celling / external work etc. including chase cutting as required excavation and back filling in all kind of soil suspended from floor under false celling or embeding the pipes laid under floors / building in 75mm. Alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of shuttering for proper completion of work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS : 5382. : The pipes will be supported with threaded G.I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work include commissioning of all pipe lines as per drawings and specifications and as directed by Engneer-in-charge : 100 mm nominal dia. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) soliddoor /window /Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water /moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick (Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters . 80x1.20 mm M.S. laths with 1.20 mm thick top cover. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing ball bearing for rolling shutters. (Including all the materials & labour charges etc. complete as direction by site in charge)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m².(Including all the materials & labour charges etc. complete as direction by site in charge)

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 178 mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply and applying of Polymer base water roofing material at 0.75 ltrs / m2/ coat, at an interval of 12 hrs between the coats and allow drying completely over the roof surface and angle fillet area, drain outtlets and put 45 gsm Glass fiber mesh 200 mm on both the sides of the fillet to make the junction and corner’s receptacle to movements after Clean the entire roof with Pressure water jet to remove the unwanted dust, loose material, oil, or any other material which may impair adhesion of the material, All surface cracks up to 1-2 mm wide should be filled with Polymer base water roofing material using a brush. Add a coat on the slab on both sides of the crack, up to a distance of 100 mm around it. Cracks more than 1-2 mm should be widened by making V-groove and repaired with PMM (Polymer Modified Mortar) all comple as per direction of site incharge. (Including all the materials & labour charges etc. complete as direction by site in charge)

provision for shifting the scrap material from roof to ground (g+5 building) by manually all complete as per the direction of incharge .(Including all the materials & labour charges etc. complete as direction by site in charge)

provision for fixing old ms gate at new place including cutting wealding all comple as per the site incharge. (Including all the materials & labour charges etc. complete as direction by site in charge)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, (Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required 3 x 1.5 Sq.mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required 4 x 1.5 Sq.mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required 5 x 1.5 Sq.mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required 3 x 2.5 sq.mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required 3 x 4 sq.mm.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying & fixing of 20mm sizes of medium class PVC conduit/ PVC casing along with accessories in surface including mending damages as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying & fixing of 25mm sizes of medium class PVC conduit/ PVC casing along with accessories in surface including mending damages as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying & fixing of 32mm sizes of medium class PVC conduit/ PVC casing along with accessories in surface including mending damages as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing modular 5/6 amps switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing modular 3 pin 5/6 A socket outlet switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm)(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required 8 Module (125mmX125mm)(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, installation, testing and commissioning of LED Tube Fittings with batten , system wattage not less than 18/20 W along with all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supplying & installation of 300 mm sweep Exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including supply and fixing of Gravity Shutter to prevent entry of foreign objects like dust, bird, pets, etc along with all accessories with 1 Year Manufacturer Warranty. (Make: Bajaj/ Crompton/ Havells/ Orient.) [EACH](Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, installation, testing and commissioning of Stanchion track light with track system wattage not less than 9 W along with all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply , fitting, fixing of glass showcase(Size- 3ft X 2.5ft and depth 1ft made) of 19mm BWP marin ply ISO710/HDMR with 1mm thick laminate finished, 10 mm thick toughened glass Clear covering at front side with hydraulic opening system. The item is related to creative lead which will depend upon the creativity of design consultants upon preparation of model/prototype / execution of item. rate to include all necessary hardware (as per approved). (Including all the materials & labour charges etc. complete as direction by site in charge)

Supply , fitting, fixing of glass showcase(Size- 8ft X 2.5ft and depth 1ft2 inch ) made of 19mm BWP marin ply ISO710/HDMR with 1mm thick laminate finished, 10 mm thick toughened glass Clear covering at front side with hinge type opening system. The item is related to creative lead which will depend upon the creativity of design consultants upon preparation of model/prototype / execution of item. rate to include all necessary hardware (as per approved). (Including all the materials & labour charges etc. complete as direction by site in charge)

Supply , fitting, fixing of Counter tabler (Size- 6ft X 1.5ft and hight 3 ft ) made of 19mm BWP marin ply ISO710/HDMR with 1mm thick laminate finished, including 3 number drawer opening inside and necessary arragemnt of computer setup. The item is related to creative lead which will depend upon the creativity of design consultants upon preparation of model/prototype / execution of item. rate to include all necessary hardware (as per approved). (Including all the materials & labour charges etc. complete as direction by site in charge)

Supply , fitting, fixing of two tag sliding (Size- 6ft X 1.5ft ) of 19mm BWP marin ply ISO710/HDMR with 1mm thick laminate finished, including 3 number drawer opening inside and necessary arragemnt of computer setup. The item is related to creative lead which will depend upon the creativity of design consultants upon preparation of model/prototype / execution of item. rate to include all necessary hardware (as per approved). (Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, installation, testing and commissioning of Surface mounted COB fixture with pressure die-cast aluminium heat sink & Clear PC as a cover in whitepowder coated finish with Integrated electronic LED driverwith not less than 12W all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, installation, testing and commissioning of superb street light with not less than 30W all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, installation, testing and commissioning of Crown shaped post top lantern in soothing moon finish made up of Poly carbonate, suitable LED lamp B22 base not less than 12W all accessories, connection and to be fitted on pillar top including conceal 1.5 mm cable with pipe wiring upto 10 m length etc complete as required.(Including all the materials & labour charges etc. complete as direction by site in charge)

Supply, fitting fixing of index board at ground floor flat area made by 18 gage steel with 25mm hole steel bar farm and the write should be itching including braille all complete as per the direction of site in charge.(Write should be approved by Head of office)(Including all the materials & labour charges etc. complete as direction by site in charge)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick.(Including all the materials & labour charges etc. complete as direction by site in charge)

Fabrication and Installation of HPL Wall Panelling / Partition using 32mm X 32mm X 3.2mm thick painted MS section frame work with 4mm thick Aluminium Composite cladding complete as per brief/design/concept/ model/ prototype/ drawings and as per directions of Site-in-Charge. The item is related to creative lead which will depend upon the creativity of the design consultants upon preparation of design/ execution of item. with all fixtures and fittings, tools, tackles, transportation and handling all complete. Rate to include all necessary hardware. (Including all the materials & labour charges etc. complete as direction by site in charge)

sovereign enterprise (BID ID -3282065)

NARENDRA P PATEL (BID ID -3282287)