SR WORK OF E1-01 Qtr THREE SIDE RCC PRECAST WALL, GATE & RCC ROAD, COLOUR WORK OF COMMANDANT OFFICE, MAIN LINE VALVE CHANGE, SALUTING MANCH, PUMPINGWORK AT STP PLANT AT SRP GROUP 16 BHACHAU, DIST.KUTCH (Including Electrification) (SBD)(3rd Attempt)

NAME OF WORK : SR WORK OF E1-01 Qtr THREE SIDE RCC PRECAST WALL,GATE & RCC ROAD, COLOUR WORK OF COMMANDANT

OFFICE, MAIN LINE VALVE CHANGE, SALUTING MANCH, PUMPING WORK AT STP PLANT AT SRP GROUP 16 BHACHAU, DIST.KUTCH

(Including Electrification)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

1 Demolition of Brick work and stone masonry including stacking of serviceable materilas

Rupees Five hundred Fifty Seven

and disposal of unserviceable materials with all lead and lift.(ii) In Cement 15.00 Cum.

Paise Thirty Two Only

2 Excavation for foundation upto 1.5 m. depth including sorting out and stacking of useful

materials and disposing of the excavated stuff upto any Lead and Lift. In Densr or Hard Rupees One hundred Fifty Five

Paise Seventy Seven Only

3 Provinding and Laying Cement Concrete 1:4:8(1cement :4coarse sand:8 M/C Rupees Two Thousand Seven

gradedstone aggregates of 40 mm nominal size) curing complete,excluding cost of 18.00 Cum. 2742.27 hundred Forty Two Paise Twenty

formwork in Foundation & Plinth. Seven Only

4 BRICK WORK using common burnt clay building bricks having crushing strength not less

Rupees Four Thousand One

than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in cement mortar 1 : 6 ( 1 cement :

19.00 Cum. 4172.60 hundred Seventy Two Paise Sixty

coarse sand ( Conventional Bricks ), Brick with frog only shall be used

5 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Rupees Two hundred Sixty Seven

including watering, ramming and consolidating etc. complete. 34.00 Cum.

Paise Eight Only

6 Provinding and Laying 18 mm thick Granite Stone Slab Flooring over 20mm thick Rupees Two Thousand One

average base of C.M. 1:6 (1cement : 6 coarse sand) laid and jointed with grey cement 90.00 Sqm. 2152.58 hundred Fifty Two Paise Fifty

slury including Rubbing and Polishing etc. Complete for All Floors. Eight Only

7 Provinding and Laying 18 mm thick Granite stone slab in Skirting / Dado over 10mm thick

average base of C.M. 1:3 (1:cement :3 coarse sand) laid and jointed with grey cement Rupees Two Thousand Two

slury including Rubbing and Polishing etc. Complete for All Floors. 38.00 Sqm. 2281.97 hundred Eighty One Paise Ninety

8 Providing and Fixing Pre Cast RCC Wall of 1.80 meter high made of RCC pole of size ( 6"

* 6" ) with 3mm high tensile steel bar & grade of concrete M-30, RCC panel size of ( 7 ft *

1 ft * 2 inch ) made with 3mm high tensile steel and grade of concrete M-30. Rate are

inclusive of excavation in foundation 300mm dia & up to 600mm depth and with concrete Rupees Two Thousand One

of grade M-30, and including with both side grove finished with cement pest rate are hundred Six Paise Fifty Six Only

inclusive of all labour and material etc. complete as per direction.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

9 Box cutting the road surface to proper slope and camber for making slope and camber for

making a base for road work including removing the excavated stuff and depositing on the Rupees One hundred Eight Paise

road side slope as directed upto 50 Mt. lead. Sixteen Only

10 construction of Granular sub base by providing couarse graded spreading im uniform layer

with motor grader on prepared surface mixing by mix in place method with rotavator at Rupees One Thousand One

OMC and compacting with vibratory roller to achieve the desired density complete as per 23.00 Cum. 1186.11 hundred Eighty Six Paise Eleven

11 Supplying of graded stone aggregate of following sizes. (for W.B.M.) (3)Crushed stone Rupees Eight hundred Thirty Eight

aggregate for hard quality up to 63mm size. 18.00 Cum.

Paise Fifty Four Only

12 Spreding the stone aggregate for soling and W.B.M incl. filling the interstics forming the Rupees Two hundred Fifty Nine

surface to required camber and gradient (ii) 40mm to 63mm size. 18.00 Cum.

Paise Sixty Four Only

13 Supplying of murrum binding as a materials. Rupees One hundred Fifty Three

Paise Thirty One Only

14 Spreding blidage or road crust filling the gaps in metal and leveling to cambert and Rupees Two hundred Seventy

gradient as directed (i) murrum 5.00 Cum.

Five Paise Ninety Only

15 Rolling & consolidation water bound macadam (except laterite and kankar) including

watering not exceeding 150mm thk. (Main layer incl. binding materials) includining filling in Rupees Twenty Paise Fifty One

depression which occurs during the process. (B)with Power roller exceeding 8 tonne and 720.00 Sqm.

not exceeding 12 tonne.

16 Construction of concrete road using trimix system having of any thickness M-300 concrete

Mix with "C" channel having size 75mm X 75mm As per required level slope and thickness

of concrete road floor levelling of place concrete with surface vibrator machine, dewatering Rupees Four Thousand Six

system device finishing with power floater machine and trowel light brooming on the 44.00 Cum. 4649.86 hundred Forty Nine Paise Eighty

surface as directed including curring etc complete.

17 Providing and lixing CAPCELL HD 100 pre- moulded compressible filler board in black

colour confirming to MORT&H Specifications (Clause 1015). having minimum density

95kg/cum.metre, non-staining with less than 1% water absorption & compression recovery Rupees Seven hundred Ninety

of 93% minimum as per specification for 20 mm wide expansion joint including cutting to 2.00 Sqm.

Five Paise Twenty Seven Only

required size and shape at all levels etc. complete as directed.

18 providing & fixing 25mm dia backup rod having minimum density 22kg per cum (ASTMD-

3575)& Compression strength of 0.40kg per sqm (ASTM-5249) and finishing with Rupees Seventeen Paise Sixty

polysulphide sealant etc.comp for 20mm wide expansion joint Two Only

19 Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per direction of Rupees Thirty Six Paise Eighty

Engineer incharge. 88.00 Rmt.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

20 Providing and Fixing Extruded Alluminium Section 15 Microns Regular Anodized (coating

with matt finished and excellent outdoor durability) Door with partly glazed of 5mm clear

float glass & partly both sides pre laminated partly board of 12mm thick as per detailed

drawing and specification gaskets of EPDM quality shall be provided for weather Rupees Four Thousand Thirty

tightening along with silicon sealent of dow corning/G.E. silicon/wacker germany of Eight Paise Eight Only

equivalent complete etc. as approved by architect complete as per the following sections

of Jindal make or equivalent.

21 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from

M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Rate is

inclusive of welding with grinding smooth surface, two coats of Oil paint and one coat of

yellow Zinc primer coat of approved brand only. Oil paint shall be Luxol Enamel paint of Rupees Seventy Five Paise Ten

Berger Paint india limited. or asian paint apcolite premium gloss Enamel of asian paint or Only

Dulux premium gloss enamel of dulux paint only structural steel shall be isi mark only

22 Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to

give an even shade including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth With Applying two coats of Fine Putty

& One coats of primer on new wall surface to give an even shade including thoroughly Rupees One hundred Ninety One

brushing the surface free from mortar dropping and other foreign matter and sand papered Paise Seventy Three Only

smooth. paint, primer and putty shall be as per approved make list of GSPHCL

23 Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give

an even shade including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth With Applying two coats of Fine Putty &

One coats of primer on new wall surface to give an even shade including thoroughly Rupees One hundred Eighty One

brushing the surface free from mortar dropping and other foreign matter and sand papered Paise Forty Two Only

smooth.paint, primer and putty shall be as per approved make list of GSPHCL

24 Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over

and above applying one coat of primer to give an required shape even shade after

throughly Brushing This surface to remove all Dirt and remains of loose poweder material Rupees One hundred Fifty Three

etc. complete. Primer shall be weather coat exterior primer & exterior emulsion paint, 2339.00 Sqm.

Paise Thirty Five Only

primer and putty shall be as per approved make list of GSPHCL

25 Removing dry or oil bound distemper by a washing and scraping and sand papering the

wall surface smooth including necessary repairs to scratches complete. Rupees Eleven Paise Forty Two

26 Providing 20mm thick SAND FACED cement plaster on walls above ground level

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick finishing Rupees Three hundred Twelve

coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gukta Plaster) 68.00 Sqm.

Paise Fifty Six Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

27 Painting one coats (excluding priming coat) on previously painted wood and wood based

Rupees Fifty Seven Paise Fifty

surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and 246.00 Sqm.

other foreign matter.

28 Painting one coats (excluding priming coat) on previously painted steel and other metal

surface with enamel paint,brushing to give an even shade including cleaning thesurface of Rupees Fifty Seven Paise Twenty

all dirt, dust and other foreign matter. Three Only

29 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Rupees Six hundred Fifty Six

Paise Eighty Six Only

30 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,coneyance to departmental stores, stacking Rupees Two Thousand Three

etc. complete. PN-1 with hand wheel/cap oprated (PD type short body) 50 mm dia. hundred Thirty Three Only

31 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,coneyance to departmental stores, stacking Rupees Three Thousand Seventy

etc. complete. PN-1 with hand wheel/cap oprated (PD type short body) 80 mm dia. Nine Only

32 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,coneyance to departmental stores, stacking Rupees Five Thousand Fifteen

etc. complete. PN-1 with hand wheel/cap oprated (PD type short body) 125 mm dia. Only

33 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,coneyance to departmental stores, stacking 1.00 No.

Rupees Seventeen Thousand

etc. complete. PN-1 with hand wheel/cap oprated (PD type short body) 250 mm dia. Three hundred Forty Eight Only

34 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,coneyance to departmental stores, stacking Rupees Twenty Two Thousand

etc. complete. PN-1 with hand wheel/cap oprated (PD type short body) 300mm dia. Eighty Seven Only

Total Amount (A) =

Total Amount (A) =

ELECTRICAL WORK

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

35 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The 3.00 Each 6917.00 Rupees Six Thousand Nine

pole should be made as per IS. and shall be coated with hot dip galvanizing as per Hundred Seventeen Only

IS:2629/2633/4759, suitable suspend local wind speed with integral Junction box with Hot

Deep Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile

35 mm X 7.5 mm Din-Rail & MCB, Brass stud type terminal and arrangement for cable

termination to be erected on RCC foundation as per details given by manufacturer and

EIC considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

415, (3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering /

farma, (6) Hot deep galvanized average 70 Micron, (7) Detail drawing will be given by

5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200 mm X 200 mm

X 12 mm base plate, 4-M16 Bolts and 600 mm long hot deep galvanized J-Bolt, nuts,

washers with 800 mm under ground and 200 mm above ground level and Foundation in

1:2:4 proportion as per details given by manufacturer and EIC considering site

requirement. Approx Pole weight 46 kg.(Make:- Bajaj, Valmont, Transrail, Ambica ,RRIs

Pat Only) (Test certificate to be submitted)

36 Supplying & erecting Coil type earthing, coil made from 8 SWG galvanised iron wire with 3.00 Each 369.00 Rupees Three Hundred Sixty Nine

50 mm OD and 50 turns (length of turns approx. 200 mm) and having additional Only

continuous streight length of 3.00 mtr at open end and should be connected to earthing

bolt and burried in 1.5 mtr deep specially prepared earth pit complete with salt and

charcoal/coke as required for coil type earthing. (Approx weight of coil 1.0 to 1.1 Kgs)

37 Supplying and erecting street light pole bracket consisting of ISI mark "B" class G.I. Pipe 3.00 Each 616.00 Rupees Six Hundred Sixteen

4.2 cm outside diameter complete with suitable B class G.I. Sleeve tubing of 2 mm. thick Only

and required size and approx. 45 Cms length suitable for 76.5 / 80 mm. required size of

pole top having nuts and bolts for fixing the brackets and having spread of Upto 0.70 mtr.

length with 110 deg. with vertical plane and suitable welded stiffner reducer and nipple

with check nut complete painted with one coat of red oxide and two coats of alluminium

paint.(Zinc Coating before alluminium Paint is mandatory) (a) For Double arm bracket

.(Jindal / Asian / Tata / Surya Prakash make Only) ((Make:- Bajaj, Valmont, Transrail,

Ambica ,RRIs Pat Only) (Test certificate to be submitted)) (Test certificate to be submitted)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

38 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- 20.00 Each 295.00 Rupees Two Hundred Ninety Five

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Only

for mounting mob & hinged doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(D) 140 mm x 140 mm x 100 mm [deep]

39 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire 6.00 Each 3512.00 Rupees Three Thousand Five

with total consumption of Max. 45 W with single piece die cast aluminium housing, high Hundred Twelve Only

power LED shall be mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen

Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light

distribution. The watt capacity of each LED must be ≥ 4 watt in streetlight fitting The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high

quality driver for protection against high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver should be less than 10% and P.F >

Also the Fixture should meet the following technical criterias Oprating range Voltage

to 270 V, system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT >

5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and

KV non integralThe Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free replcement Guarantee for

complete Fixture)

40 Supplying, Installing, Testing & Commissioning of 30 W LED Outdoor type Post top 20.00 Each 4052.00 Rupees Four Thousand Fifty Two

Lantern light with IP65 protection with housing made of sturdy aluminium die cast housing Only

with radiating cool surface and milky white high quality PMMA round cover with corrosion

resistant Grey colour powder coating with high efficiency potted driver with necessary

safety precautions, 10 kv surge protection device with high min. 2400 lumens LED with

long life of 30K @ L70 (L70@30000 hrs.), Installation bracket as per site requirement,

accessories 3C X 1.5 Sq.mm copper flexible wire upto terminal box etc (Note:-The

manufacturer / authorised Channel partner of the manufacturer has to submit 4 years free

replcement Guarantee for complete Fixture)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

41 Providing & Erecting Univesal Astro interlligent Street light Control System insu with 1.00 Each 12895.00 Rupees Twelve Thousand Eight

weather proof box for indoor allplication 5 KVA (as Per atteched Specification) Hundred Ninety Five Only

42 Providing & erecting XLPE (IS:7098) (I)-88 ISI marked armoured Copper cable for 1100 250.00 Mtr. 361.00 Rupees Three Hundred Sixty One

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage Only

1.6mm thick cable clamp or in existing DWC pipe underground or road crossing or floor.

(a) For 4 core x 4 sq.mm.

43 Providing & fixing double compressed heavy duty flange type brass cable gland with 40.00 Each 43.00 Rupees Fourty Three Only

rubber ring for PVC insulated armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

44 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for 251.00 Each 8.00 Rupees Eight Only

cable of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

45 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 100.00 Mtr. 46.00 Rupees Fourty Six Only

marked copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

46 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 100.00 Mtr 117.00 Rupees One Hundred Seventeen

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent and Only

ultra violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as per original. (A)

For Outer dia.50 mm and Inner dia. 38 mm (Test Certificate to be Submitted)

47(a) Providing and erecting Medium Class FIA approved and ISI mark white colour 100.00 Mtr 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along

with continuous fish wire to draw mains with necessary fittings and junction boxes for

following dia. (a) 20 mm. dia.

47(b) 25 mm dia 21.00 Mtr 33.00 Rupees Thirty Three Only

48 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 20.00 Mtr 91.00 Rupees Ninety One Only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 10.00 sq. mm

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

49 Providing and erecting open well type horizontal submersible mono block pump set with 2.00 Each 25730.00 Rupees Twenty Five Thousand

cast iron body having following specification For 3 phase open well horizontal mono Seven Hundred Thirty Only

block pump set suitable for 1550 to 370 LPM discharge at required head as per

plumbing length and vertical & Horizontal head. Agency has to submit the details

calculation of head to GSPHCL and get approval of make and model of pump having

tender specification with TDS & GA drawing. Suitable for 65 mm dia delivery pipe

with 10 mtr. necessary Size 3 Core Flat copper flexible cable. (Body: Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS / Carbon material,

test certificate from manufacture shall be submitted).

The model of the pump with respect to head and discharge will be approved by EIC.

Pump should have following specification.

(1) Minimum 10mtr cu. flat cable of suitable size must be provided with pump.

(2) Pump shall be installed as per manufacturer foundation/ erection drawing or as per IS

(3) with necessary starter as per EIC

(Body full CI, stator winding- copper, rotor- copper, shaft- SS / carbon material, motor-

Energy efficiency) Cat-II

50 Supplying and erecting approved make 7.5 HP DOL type motor control cubical panel 1.00 Each 47752.00 Rupees Fourty Seven Thousand

made from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged Seven Hundred Fifty Two Only

doors and locking arrangement Floor Mounting On 300 mm Height with MS Stand Angle &

CC Foundation. Size 35 mm (H) x 35 mm (W) x 05 mm (D). The detail specification &

quantity of material used are as under.

Panel must be with minilec relay for auotmatic change over for pump 1 & 2 logically

without using manually change over switch (Minimum Panel Size: 1.10 meter (H) x

meter (W) x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp., Make:

L&K, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Make: Schneider/L&K,

Qty: 01 No. (3) Ammeter Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty:

No. (4) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Schneider/L&K, Qty: 01 No. (5)

Volt Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No. (6) C.T.- Current

Transformer, Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B),

Rating: 22.5 mm LED, Make: L&K, Qty: 03 Nos. (8) SP MCB , Rating: 20 Amp., Make:

L&K, Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10)

Copper Busbar, Rating: 63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Outgoing Feeder (7.5 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA, Rating:

Amp., Make: L&K, Qty: 02 Nos. (2) Power Contactor (415 V) Main, Rating: 18 Amp.,

Make: L&K, Qty: 02 Nos. (3) Over Load Relay, Rating: 9-15 Amp., Make: L&K, Qty:

Nos. (4) Digital Ameter (SR-65), Rating: 0-30 Amp., Make: Schneider/L&K, Qty: 02 Nos.,

(5) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Schneider/L&K, Qty: 02 Nos. (6)

Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make: L&K, Qty: 04 Nos. (7)

Push Button (Start,Stop), Rating: 22.5 mm, Make: L&K, Qty: 02 Nos. (8) SPP, Rating:

V, Make: Ellico, Qty: 02 Nos. (9) Terminal, Rating: As per Amp., Make: L&K, Qty: 04 Nos.

(10) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (11) Power Wiring,

Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA, Rating: 6 Amp.,

Make: L&K, Qty: 01 No. (2) Capacitor- MPP Type, Rating: 3 KVAr, Make:

Concap/Subodhan, Qty: 01 No., (3) Power wiring, Rating: As Per Amp., Make: Any ISI,

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating: 32 Amp.,

Make: L&K, Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3) Earthing Strip: 25 x 3;

G.I. Strip, Qty: 01 No. (4) MCB-DP-10KA, Rating: 20 A., Make: L&K, Qty.:01 Nos.

51 Lowering of existing submercible motor pump set complete with required No. and size 2.00 Each 1272.00 Rupees One Thousand Two

of pipes by means of proper chain pulley block and pipe wrenches. Job includes stacking Hundred Seventy Two Only

of pipes cronologically after the checking of threads. For open well horizontal

submercible pump set for sump well. (i) 7.5 HP to 15.0 HP.

52 Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I. Pipe & 30.00 Mtr. 342.00 Rupees Three Hundred Fourty

erecting as directed by Engineer-in-charge with necessary plumbing as desired. [d] For Two Only

53 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI marked with 3.00 Each 1475.00 Rupees One Thousand Four

packing, flange, nuts and bolts etc.suitable for following pipe size. [a] For 65 mm dia. Hundred Seventy Five Only

54 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable kitkat fuse / 2.00 Each 232.00 Rupees Two Hundred Thirty Two

MCB to be . erected on polished wooden board inside the box with hinged/sliding door Only

with rubber rings and erected on pole with suitable pole clamp, all duly painted with one

coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall be taken extra)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

55 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per 99.00 Kg. 75.10 Rupees Seventy Five and Paisa

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square Ten Only

pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and

true care red oxide metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding. Payment will

be done on KG as per Actual weight.

56 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 48.00 Mtr. 145.00 Rupees One Hundred Fourty Five

Submersible copper cable approved make of following Size. For 3 Core x 4.0 Sq. mm. Only

57 Providing water proof straight joint in PVC insulated flat flexible copper cable by using 2.00 Each 188.00 Rupees One Hundred Eighty Eight

insulated material water proofing material and making the joint complete. UP to 10 Only

Total Electrical Amount (B)

Total Amount (A+B) =

Total Amount (A+B) =

Contractor sign I/C Executive Engineer