REPAIR AND REPLACEMENT OF INTERNAL RE-WIRING AND CONVENTIONAL LIGHTS CONVERTED INTO LED LIGHT FITTINGS AND FIXTURES, MCBS, DBS, SUB MAIN WIRING AND ASSOCIATED WORKS IN JCOS/ORS MD ACCN AT MIL STN BARRACKPORE UNDER GE BARRACKPORE

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with the existing surfaces and applying white/ colour wash/distemper after applying putty for smooth finish surface complete all as specified and directed.

M&L for surface point wiring complete with two single core 1.5 sqmm PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20mm, ISI marked (medium grade) as required at site with all accessories such as Tee, corner, over laping, connector etc on walls / roofs / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for casing & caping entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of modular top cover, blanking plate as per numbers of switch modules, modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures modular accessories of suitable modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note: All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.)

One light point controlled by one switch .

One fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches .

All as per Item No.2.00 here-in-before but point wiring with 2.5sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 2.5 sqmm PVC insulated multistranded flexible copper conductor FR-LSH complete all as specified and directed for the following:-

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FR-LSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of modular top cover , blanking plate as per numbers of switch modules, modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures modular accessories of suitable modules and including 1.5 Sqmm PVC insulated multistranded FR-LSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surfaces and applying white/colour wash/distemper after applying putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.)

One light point controlled by one switch .

One fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches .

All as per Item No4.00 here-in-before but point wiring with 2.5sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 2.5 sqmm PVC insulated multistranded flexible copper conductor FR-LSH complete all as specified and directed for the following:-

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

All as per Item No.4.00 here-in-before but point wiring with 4.0sqmm PVC insulated multistranded flexible unsheathed copper conductor FRLSH and earth conductor of size 4.0 sqmm PVC insulated multistranded flexible copper conductor FRLSH of 3 pin, 16 Amps socket outlet complete all as specified and directed .

S&F for modular type switch 10 Amps, single pole, 1 way, 1/2 module, 240V, AC, ISI Marked complete all as specified and directed.

S&F for modular type switch 10 Amps, 2way, single pole,1/2 module, 240V, AC, ISI Marked complete all as specified and directed.

S&F for modular type bell push, 6Amps, 1/2 module, single pole, 1 way, 240V, AC, ISI Marked complete all as specified and directed.

S&F for modular type switch 16 Amps, single pole, 1way, 1/2 module, 240V, AC, ISI marked complete all as specified and directed.

S&F for modular type socket shuttered type 6 Amps, 2/3 pin combined 2 module, 240 V, AC, ISI marked complete all as specified and directed.

S&F for modular type socket 6/16 Amps, 6 pin combined shutter socket, 2/3 module with light indication, 240 V, AC, ISI marked complete all as specified and directed.

S&F for red colour lighting indication lamp 6 Amps, single pole, 240volts, AC, 50 Hz suitable for 1/2 module ISI Marked complete all as specified and directed.

S&F for fan regulator, modular type electronic, stepped type (01 to 4/5), 100 to 120 Watts, 240Volts, AC, ISI marked complete all as specified and directed.

S&F for call bell, AC, 230 Volts, single pole, multi music type, ISI marked complete as in repair all as specified and directed.

S&F for angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.

S&F for ceiling rose , surface bakelite 65X50mm, three terminal, PVC/polycarbonate body complete all as specified and directed.

S&F for decorative box type 20 watt/22 watt LED fitting of fire retardant engineering grade complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible conductor cable of 0.50 Sqmm size and including mounted on PVC/Wooden round/square blocks-02 Nos including removing old unserviceable light fittings complete all as specified and directed. (Make - Havells Cat No REGALBATTENT8UPTO1 x 22WDSBSWH/Crompton Greaves cat No : DMLN1LT8-16 for fittings and make - Crompton Greaves Cat No LT8-20-865-2 /Havells Cat No PHOTONULTRA1213T8SSTL20WLED865SPC as approved for LED lamp as approved)

S&F for decorative box type 9 watt LED fitting in and including LED tube light of fire retardant engineering grade complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible conductor cable of 0.50 Sqmm size and including mounted on PVC/Wooden round/square blocks-02 Nos including removing old unserviceable light fittings complete all as specified and directed. (Make - Havells Cat No REGALBATTENT8UPTO1 x 09WDSBSWH/Crompton Greaves cat No : DMLN1LT8-8 for fittings and Havells Cat No TL10WLED 865SPC/Crompton Greaves cat No LT8-8-865-2 for LED lamp as approved)

S&F for decorative type surface mounted 1X6 watts LED light fitting with LED lamps including fixing arrangements at any height with nuts, screws and washers and connected to ceiling rose and including removing old unserviceable fittings complete all as specified and directed. (Make: Crompton cat No.LCSR-06-CDL / Havells cat No EDGEPRORDDLR6WLED857S as approved)

S&F for recess mounting 2'x2' LED 36 Watt light fittings with LED lamp and required driver, slimmest 9 mm thin in class LED ceiling panel with best in class aesthetic white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm modular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete as in repair all as specified and directed, (Make: Crompton Cat No.LCPL-36-CDL(2x2) / Havells Cat No.ENDURASLIMPROPLUS2X2PLR36WLED857MOD as approved )

S&F for powder coated sheet metal enclosure with metal type acrylic door, 415 volts, AC, VTPN DB (V-vertical type distribution board) 8 way plus 24 modules, for flush mounting with 200amps copper busbar, 2 neutral/earth bar for ease of installation and MCCB incomer of rating upto 200Amps, FP and MCB SP /TP MCB's as outgoing and complete connecting cable links with top and bottom with IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat complete as in repair all as specified and as directed. (Make: Legrand cat No.5077 32, 8 way / Hager Cat No.VYVO8DM-P / L&T Cat No.DBVTH008GD as approved)

S&F for powder coated sheet metal enclosure acrylic door 415 volts AC,TPN distribution board 8 way suitable for flush mounting with 100amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 100Amps, MCB TPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat complete as in repair all as specified and as directed. (Make:- Legrand cat No. 5076 82 8 way / Hager Cat No.VYT08GH/ L&T Cat No. DBTPN008GD as approved)

S&F for powder coated sheet metal enclosure acrylic door 240 volts AC, SPN distribution board 12 way for flush mounting with 100amps copper busbar, neutral bar, earth bar suitable for MCB incomer of rating upto 100Amps, MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat complete as in repair all as specified and as directed. (Make:- Legrand cat No. 5076 22 12 way / Hager cat No.VYS12G / L&T Cat No. DBSPN012GD as approved).

S&F powder coated sheet metal enclosure acrylic door 240 volts AC, SPN distribution board 8 way for flush mounting with 100amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 100Amps, MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface & colour coat complete as in repair and all as specified and directed. (Make: Legrand Cat No. 5076 21 8 way / Hager cat No.VYS08G / L&T Cat No.DBSPN008DD as approved)

S&F for powder coated sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 4 way for flush mounting with 100 amps copper busbar, neutral bar, earth bar suitable for MCB incomer of rating upto 100 Amps, MCB SPN/DP and MCB SP, 10KA as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat complete all as specified and as directed. (Make:- Legrand cat No. 5076 20 4 way / Hager cat No.VYS04G / L&T Cat No. DBSPN004GD as approved).

S&F for MCB SP 6 to 32 Amps 10 KA, "C" series, AC, 240Volts, 50Hz , ISI marked complete all as specified and directed. (Make:- Legrand / Hager / L&T as approved)

S&F for MCB SPN 32 to 40 Amps 10 KA, "C" series, AC, 240Volts, 50Hz , ISI marked complete all as specified and directed. (Make:- Legrand / Hager / L&T as approved)

S&F for MCB, four pole, 63 Amps, 'C' Series, 240 Volts, 50Hz, ISI marked complete as in repair all as specified and directed. (Make:- Legrand / Hager / L&T as approved)

M&L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty complete after taking down existing sub-main wiring of any type/size from wall and making good disturbed surface all as specified and directed. (Note : -Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of 25mm dia PVC conduit shall be measured as one unit)

M&L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty complete after taking down existing sub-main wiring of any type/size from wall and making good disturbed surface. all as specified and directed. (Note : -Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of 25mm dia PVC conduit shall be measured as one unit)

M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty complete after taking down existing sub-main wiring of any type/size from wall and making good disturbed surface all as specified and directed. (Note : -Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of 25mm dia PVC conduit shall be measured as one unit)

S&F for suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C' series, 240 Volts complete all as specified and directed. (Make:- Legrand / Hager / L&T as approved)

S&F for MCCB, four Pole, 100 Amps, breaking capacity Icu at 415 AC, 50 HZ, 25 KA complete all as specified and directed. (Make : L&T Cat CM91712OOKOOG/Havells Cat No. IHLGHF0100/Legrand Cat No. 4200 55 as approved)

S&F for aluminium busbar chamber in sheet metal enclosure of current rating capacity 100 amps, 4way, 415 volts with necessary fixing arrangements such as hole fasteners/screws, bolts, nuts and washers etc and including removing old unserviceable item from existing location and making good the disturbed surface area and complete in repair all as specified and as directed. (Make:- Havells/Standard/Hager/Indo asian as approved)

M&L for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45X 45X 45 CM, RCC cover (1:2:4) type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. (Galvanised strip upto 7.5m including testing consider in this item).

S&F for modular type switch 6 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete as in repair all as specified and directed.

S&F for modular type switch 16 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete as in repair all as specified and directed.

S&F for modular type switch 10 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete as in repair all as specified and directed.

S&F for modular type socket shuttered type 6 Amps, 2/3 pin combined 2 module, 240 V, AC, ISI marked complete all as specified and directed.

S&F for modular type socket 6/16 Amps, 6 pin combined shutter socket, 2/3 module with light indication, 240 V, AC, ISI marked complete all as specified and directed.

S&F for modular type switch 10 Amps, 2 way, 1 module, 240V, AC, ISI Marked complete as in repair all as specified and directed.

S&F for fan regulator electronic, modular type, stepped type (0 to 4/5), 100 to 120 watts, 2 module, 230 volts, AC, 360 degree rotation, ISI Marked complete in repairs all as specified and directed.

S&F for modular type bell push 10 Amps,1 module, single pole, 1 way, 240 volts, AC, ISI Marked complete as in repiar all as specified and directed.

S&F for call bell, AC, 230 Volts single pole, multi music type ISI marked complete as in repair all as specified and directed.

S&F for red colour lighting indication lamp 6 Amps, single pole, 240volts, AC, 50 Hz suitable for 1 module ISI Marked complete as in repair all as specified and directed.

S&F for modular metal flush box 1 module, 1.63mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 2 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 3 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 4 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 5 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 6 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 8 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 12 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular metal flush box 16 module, 1.60mm thickness, ISI marked complete as in repairs all as specified and directed.

S&F for modular white cover plate with frame, 1 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 2 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 3 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 4 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 5 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 6 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 8 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 12 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for modular white cover plate with frame, 16 module, ISI marked including screws, washers etc complete as in repair all as specified and directed.

S&F for call bell ding-dong sound type, 230 Volts, 50 Hz, ISI marked complete as in repair all as specified and directed.

S&F for call bell /buzzer type, 240 Volts, 50 Hz, ISI marked complete as in repair all as specified and directed.

S&F for switch piano, flush type, single pole, one way, 5/6 Amps, 240Volts, ISI marked, AC complete as in repair all as specified and directed.

S&F for bell push switch, single pole, one way, flush type, 6 Amps, 240 volts, ISI marked complete as in repairs all as specified and directed.

S&F for switch socket outlet 6Amps, 5 pin, flush type, 240 volts, ISI marked complete in repairs all as specified and directed.

S&F for switch socket combination, 6Amps, 5 pin, flush type, 240 volts, ISI marked complete as in repairs all as specified and directed.

S&F for switch socket combination, 6/16Amps, 6 pin, 2 in 1 with neon indicator type, 240 volts, ISI marked complete as in repairs all as specified and directed.

S&F for switch socket combination, 6/16Amps, 6 pin, 2 in 1, 240 volts, ISI marked complete as in repairs all as specified and directed.

S&F for batten holder /angle lamp holder, PVC/polycarbonate type, ISI marked complete as in repairs all as specified and directed.

S&F for fan regulator stepped type (0-4/5 step) electronic 240 Volts, AC, flush type, 100 Watts to 120 watts single pole, ISI marked including connecting, testing complete as in repair all as specified and directed.

S&F for LED PLL lamp 18 watt, 4 pin, 240 Volts, 50 Hz, AC, in built ISI Marked including providing suitable holders complete all as specified and directed. (Make: Crompton Cat No.LPLLA-18-CDL/Havells Cat No. LHLDEJNEML8Z018 as approved)

REMCO

INDUSTRIAL CONSTRUCTION

TAMALIKA ENTERPRISE

N. C. DUTTA

M/S KARTICK CHANDRA CHAKRABORTY

SANKAR TRADERS