Repair and renovation of Headquarter Buildings DFO Kargil

Amount

Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Second class kail wood

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood

Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job

Finishing walls with acrylic smooth exterior paint of required shade on old work (one or more coats applied @ 0.90 liter/10sqm

Pre-laminated T&G medium density fibre board exterior grade (Grade-I) 12 mm thick IS:14587:1998 marked one side decorative and other side balancingProviding and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.Flat pressed 3 layer particle board or graded wood particle board grade-I type-II, IS: 12823 marked including primer coat on unexposed surfaces lamination, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand.

Dismantling and stacking within 1.00Km lead, of Temporary CGI Sheet Shed including removal of wooden ballies in posts and struts all complete Job

Wiring for ligting points/fan point/exhaust fan with 1.5Sqmm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVConduit and earthing the point with 1.5 Sqmm FR PVC insulated copper conductor etc as required

Wiring for circuit /submains wiring along with circuit/submains wiring along with earth wire of following sizesof FR PVC insulated copper conductor single core cable in surface /recessed conduit as required:-

2X2.5sqmm + 1X2.5sqmm earth wire

2X6sqmm + 1X4sqmm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.1 Pair

supply/installation /Fixing/testing and commissioning 12W LED lamp including batten holder fancy type with complete accessories

S/F of Wall fan 3 blade complete of approved brand

S/F of exhaust fan shutter type , including making hole in existing opening to suit the above fan

S/F of hanging light including connection as required

S/F of following size/module,GI box along with modular base and cover plate fo modular switches/sockets in recess as required

3 module(100mmX75mm)

4 module(125mmX75mm)

6 module(200mmX75mm)

8module(200mmX75mm)

S/F of following modular switches/sockets on the existing modular plate and switchesbox including connection but excluding modular plate etc as required ,GI box along with modular base and cover plate fo modular switches/sockets in recess as required

6 amp switch

16 amp switch

3 pin, 6A socket outlet

6 pin, 16A socket outlet

indicator lamp

Telephone socket outlet

TV antenna socket outlet

MCB Distribution board:- S/F of double door MCB distrobution board,240V,sheet steel,powder coated DB's fitted with bus bar , Neutral link earth Bar and Din bar of following no of ways: a)12 way, Double door

S/F of 6 amp to 40amp, 240V, B series,ISI Mark miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required:-

single pole 6A,SP MCB

single pole 16A,SP MCB

Double pole 40A ,DP MCB

Double pole,63A cahnge over switch

S/I of 16 sqmm.2 core PVC insulated aluminium conductor un armoured cable for working voltage 1100V grade, including PVC conduit and thimble required etc.

Supplying and fixing of size(25mm dia) PVC conduit along with the accessoriesin surface/recess includung cutting the wall making good the same inm the case of recessed conduit as required

Supply, laying and fixing of RG 11 coaxial cable complete with fitting and accessories

5 KVA/21600 VAH 5 Star with trolley Sine Wave Inverter ( 5 KVA INVERTER WITH 08 NOS 150AH BATTERY AND BATTERY RACK) of approved brand

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Removing and Replacing of Existing Door Shutters with Partial 5mm thick Glass panes in shutter including painting two coats of approved wood preservative on both sides of Shutter including disposal of rubbish to the dumping ground within 50 meters lead:

Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortor 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete: 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size

12 mm thick cement plaster of mix in cement mortar 1:6 (1 cement:6 fine sand)

Providing and fixing of M.S. angle irons, flats etc for stands, inluding cost of cutting, welding, painting carriage all complete.

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen nd G.I limpet washers or with G.I lmpet washer filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlappong of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating.

M/S MANZOOR HUSSAIN

K.A TRADERS

M/S MIR AND SONS TRADING CORPORATION.

M/S MOHD KAZIM BEIGH

SAFARAZ HUSSAIN

M/S MOHAMMAD JAVED

MS.KB.Traders

M/S Mohd Nissar

M/s Muzafar Ali

M/S MARZIYA BANOO

M/S KHURSHEED ALI KHAN

M/S ABDUL AZIZ

GHULAM HASSAN