Construction of Judicial Staff Quarters (Type E-1, D-4, C-28, B1-14, B-56, A-28 Units) at Taluka-Morbi, Dist.Morbi

Name of Work :-Construction of Judicial Staff Quarters (Type E-1, D-4, C-28, B1-14, B-56, A-28 Units) at Taluka-Morbi, Dist.Morbi

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

1 1.90 Clearing and grubbing road land including uprooting rank vegetation grass Hect 28455.09 Rupees Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Thousand Four Hundred

and disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five Paise Nine Only

2 7988.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of Cum 266.51 Rupees Two Hundred Sixty

useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Six Paise Fifty One Only

3 4923.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking Cum 287.21 Rupees Two Hundred

of useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Eighty Seven Paise Twenty

Murrum One Only

4 7482.00 Box cutting the road surface to proper slope and camber for making a base for road work Cum 109.24 Rupees One Hundred Nine

including removing the excavated stuff and depositing on the road side slope as directed Paise Twenty Four Only

5 6974.00 Providing and Laying W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm Cum 1255.20 Rupees One Thousand Two

in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, including Hundred Fifty Five Paise

spreading, watering and cosolidation by vibratory roller as per MoRTH specifications etc. Twenty Only

complete as directed by Engineer-in-charge.

6 822.00 Providing and laying ordinary cement concrete M.150 for curing complete including cost of Cum 4727.19 Rupees Four Thousand

formwork and reinforcement for reinforced concrete work in Foundations, footings,Base of Seven Hundred Twenty

columns and Mass concrete. Seven Paise Nineteen Only

7 3501.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3 coarse sand : 6- hand broken Cum 3095.25 Rupees Three Thousand

stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in Ninety Five Paise Twenty

(A) Foundation and Plinth Five Only

8 1781.00 Pro. & laying controlled cement concrete M-250 and curing complete inclu. the cost of form Cum 4457.34 Rupees Four Thousand

work and foundation, footings, base of column and mass concrete. Four Hundred Fifty Seven

Paise Thirty Four Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

9 473.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.12 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Plinth Twenty Six Paise Twelve

10 4490.00 Providing and laying in position Control concrete M-300 grade concrete for using cement Cum 5279.73 Rupees Five Thousand Two

content as per approved improve workability without impiring strength and durability as per Hundred Seventy Nine

direction of the engineer-in-charge. (Min cement level as per latestIS 456 shall be Paise Seventy Three Only

maintained) (Cement level 410kg) for require thickness Trimix C.C. Road with trimix work

with power trowling sheet form with M.S. Channles, surface vibrator with providing road

expansion joint having size thickness h/3 deep minimum by concrete cutter machine and

filled with Bitumin, finishing with Surface hardner 1 sqmt./1.5 kg etc. necessary all

eqipments, all labour charges complete.

11 740.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4245.09 Rupees Four Thousand

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Two Hundred Fourty Five

Conventional Paise Nine Only

12 6165.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of Cum 136.92 Rupees One Hundred

foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited Thirty Six Paise Ninety

layer by ramming and watering. Two Only

13 557.00 Filling in plinth with sand under floors including watering ramming, consolidating and Cum 481.80 Rupees Four Hundred

dressing complete Eighty One Paise Eighty

14 1252.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Cum 301.78 Rupees Three Hundred One

including watering, ramming and consolidating etc. complete. Paise Seventy Eight Only

15 9188.00 Earthwork for embankment including breaking clods, dressing with all lead and lift (A) Cum 157.91 Rupees One Hundred Fifty

From Borrow pits within land width Seven Paise Ninety One

16 9188.00 Rolling & Watering of earthwork in layers with power roller including filling in depressions Cum 22.96 Rupees Twenty Two Paise

which occur during the process. As directed Ninety Six Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

17 2802.00 Carring out plinth treatment to post construction / existing structure by spraying chemical SqM 124.35 Rupees One Hundred

solution for termite control treatment including labour and material consistment with I.S.I Twenty Four Paise Thirty

specification. Using Chlordene and Chiorpurfiles 20 EC.As Per 6131_paret-II Five Only

Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical /Sqm of surface is recommended as per I.S

18 1547.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 7453.07 Rupees Seven Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Four Hundred Fifty Three

Column. Paise Seven Only

19 2196.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6533.15 Rupees Six Thousand Five

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Beam Hundred Thirty Three Paise

20 1631.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6733.96 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Slab Seven Hundred Thirty

Three Paise Ninety Six Only

21 649.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6120.67 Rupees Six Thousand One

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Hundred Twenty Paise

Vertical and Horizontal fins. Sixty Seven Only

22 143.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6086.59 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintel Eighty Six Paise Fifty Nine

23 61.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6568.76 Rupees Six Thousand Five

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Hundred Sixty Eight Paise

Chhajja Seventy Six Only

24 180.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 7037.94 Rupees Seven Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Stair Thirty Seven Paise Ninety

Case. Four Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

25 1400828.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding kg 78.35 Rupees Seventy Eight Paise

and placing in position complete. Thirty Five Only

26 3836.00 Brickwork using common burnt Clay building bricks having crushing strength not less than Cum 4575.20 Rupees Four Thousand Five

35 kg./Sq.Cm. in Super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand). Hundred Seventy Five Paise

27 2170.00 Half brick masonry in common brunt clay building bricks having crushing strength not less SqM 770.25 Rupees Seven Hundred

than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Seventy Paise Twenty Five

Mild steel round bars after every three course embedded in Cement Mortar in foundation Only

and plinth (B) Conventional

28 10484.00 Providing 10mm thick cement plaster in Double coat on RCC Columns, Beams & Ceillings Sqm 153.09 Rupees One Hundred Fifty

for interior plastering With Single Coat Mala Plaster in(i)Cement mortar 1:4 (1-cement:4- Three Paise Nine Only

29 34206.00 Providing 15mm thick cement plaster in Double coat on Rough (Similar)side of single or Sqm 248.36 Rupees Two Hundred

half brick walls,RCC Column, Beams for interior plastering and finished With Double Fourty Eight Paise Thirty

Coat Mala Plaster in (i) Cement mortar 1:3 (1-cement:3-sand) Six Only

30 23896.00 20mm thick sand faced GUTAKA FINISHED cement plaster on walls above ground level SqM 334.03 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Thirty Four Paise Three

finishing double coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

31 210.00 Providing and filling cinder inlcuding watering and consolidation etc complete. SqM 602.25 Rupees Six Hundred Two

Paise Twenty Five Only

32 4075.00 Providing throating or plaster drip and moulding to R.C.C.Chhajja. Rmt 43.05 Rupees Fourty Three Paise

33 2349.00 Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at SqM 414.40 Rupees Four Hundred

junction the Brick.masonary and reinforcement cement concrete member, work done before Fourteen Paise Fourty Only

plastering work including scaffolding etc complete.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

34 3683.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm Sqm 3127.38 Rupees Three Thousand

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Twenty

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Seven Paise Thirty Eight

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing Only

35 8459.00 P & L vitrified (Soluble Salt) 10 mm thick tile flooring over 20 mm (average) base of Sqm 1476.54 Rupees One Thousand Four

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring Hundred Seventy Six Paise

by adhesive material including dismentaling of existing flooring and jointed with color Fifty Four Only

cement slurry including finised with flush pointing & cleaning the surface etc. complete for

shade approved by architect as per Arch. drawing.

36 498.00 Providing and laying polished blue Kota stone slab flooring over 20mm (Average) thick Sqm 1013.87 Rupees One Thousand

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - Thirteen Paise Eighty Seven

coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the Only

shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

37 828.00 Providing and laying Ceramic tiles 6mm thick in flooring with 3mm groove & Epoxy Sqm 1138.50 Rupees One Thousand One

grouting laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Thirty Eight Paise

finishing with flush pointing in white cement. Fifty Only

38 8807.00 Providing and laying coloured glazed tiles of the size 8 mm to 10 mm in skirting, risers of Sqm 1488.24 Rupees One Thousand Four

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with Hundred Eighty Eight Paise

Colored cement slurry. Twenty Four Only

39 2814.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 Sqm 779.70 Rupees Seven Hundred

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy

be tempered to bring mortar creme out upto surface using white cement including Only

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

40 3088.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded Sqm 339.08 Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight

neat cement. (B) 50mm thick. Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

41 44690.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of Sqm 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

42 44690.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on Sqm 89.89 Rupees Eighty Nine Paise

undecorated wall/Celing surface to give an even shade including throughly brushing the Eighty Nine Only

surface free from mortar droppings and other foreign matter and sand papered smooth.

43 23896.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to Sqm 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdered materials.etc complete Only

44 26959.00 Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat Kg. 81.64 Rupees Eighty One Paise

of primer and two coat oil paint as per details given by architect. as per attached detail Sixty Four Only

architectural drawing.

45 1789.00 Providing And Fixing 35mm thick solid core Wooden Flush Shutter Confirming To Is:2202 Sqm 6821.40 Rupees Six Thousand Eight

& Isi Approved Manufacturer, Covered With 1mm Thick Laminates On Each Side Of Hundred Twenty One Paise

Shutter, 6mm Thick Polished Machine Glued Teakwood Beading On Periphery, 150Mm - Fourty Only

200Mm S.S.Handles And S.S.Fixtures & Locking Arrangement On Each Shutter, Fixed

With 4 Nos. 150Mm High S.S.Hinges,Door Stopper, door eye viewer etc As Per Selection.

46 356.00 Providing and fixing window having extruded aluminum Colour anodized section frame Sqm 5041.86 Rupees Five Thousand

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track Fourty One Paise Eighty Six

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size Only

122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 3 shutter of 5 mm thick transparent bronze colour tinted float

glass & 1 shutter of SS mosquito net shutter with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

47 513.00 Providing and fixing window having extruded aluminum Colour anodized section frame Sqm 4549.05 Rupees Four Thousand Five

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Three track Hundred Fourty Nine Paise

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size Five Only

122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 3 shutter of 5 mm thick transparent bronze colour tinted float

glass & 1 shutter of SS mosquito net shutter with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

48 99.00 Providing and fixing Standard Extruded Colour Anodized Alluminium Section, Sqm 2822.09 Rupees Two Thousand

Equivalent To Jindal Section Frame - 21458, With 5Mm. Thick Frosted Glass Adjustable Eight Hundred Twenty Two

Louvers Of Standard Make as per instructions given by engineer in charge. Paise Nine Only

49 229.00 Providing cooking platform of 60 cm. width and 70 cm. height including 25 mm. thick side SqM 3970.39 Rupees Three Thousand

polished Kota Stone vertical and horizontal support and including fixing of steel sink Nine Hundred Seventy

cutting in plateform as per design including cost of cement (Using granite stone over Kota Paise Thirty Nine Only

50 1784.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof plywood ( ISI SqM 10227.52 Rupees Ten Thousand Two

710) and fixing minimum 0.8 mm thick decorative lamination sheet (20 mm x 2 mm) Hundred Twenty Seven

Plywood frame having a size 7 cm x 4 cm and also provide drawer with tendum of min Paise Fifty Two Only

60cm size and min 3 no. of shelves using necessary fixtures, fastening, nails, fevicol, ball

catch, magnet and innerside of cupboard oil painting two coats with primer coat etc.

complete as per detailed drawing and laminate will be selected by engineer in charge.

51 590.00 Providing and fixing stainless steel modular railing at 900mm height and of SS pipe with Rmt 3254.87 Rupees Three Thousand

support of horizontal pipe as 15mm dia at required spacing as per design by engineer in Two Hundred Fifty Four

charge and SS having 316 grade and 15 guage pipe including fastening, hold fast, clumps, Paise Eighty Seven Only

coach bolts for fixing to wall including touching finishing to wall etc complete approved by

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

52 940.00 Providing and fixing stainless steel modular railing at 200mm height and of SS pipe with Rmt 1616.91 Rupees One Thousand Six

support of horizontal pipe as 15mm dia at required spacing as per design by engineer in Hundred Sixteen Paise

charge and SS having 316 grade and 15 guage pipe including fastening, hold fast, clumps, Ninety One Only

coach bolts for fixing to wall including touching finishing to wall etc complete approved by

53 626.00 Providing & laying Granite shelves to C.B. with making the grooves in the walls and fixing SqM 2197.45 Rupees Two Thousand One

the same complete. Hundred Ninety Seven

Paise Fourty Five Only

54 670.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 170.36 Rupees One Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Seventy Paise Thirty Six

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[A] 15 mm.

55 670.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 253.82 Rupees Two Hundred Fifty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Three Paise Eighty Two

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[C] 25 mm.

56 895.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 447.72 Rupees Four Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Fourty Seven Paise Seventy

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Two Only

complete.[E] 40 mm.

57 895.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 660.58 Rupees Six Hundred Sixty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Fifty Eight Only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete.[F] 50 mm.

58 2620.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

59 2620.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

60 2192.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 148.12 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

61 2180.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

62 2257.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt 280.23 Rupees Two Hundred

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

63 2710.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 297.80 Rupees Two Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Ninety Seven Paise Eighty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-110mm Dia

64 1387.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 613.27 Rupees Six Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Thirteen Paise Twenty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Seven Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-160mm Dia

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

65 124.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred

Ninety Three Paise Four

66 268.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Rupees Five Hundred Five

Paise Seventeen Only

67 268.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise

Eighty Three Only

68 670.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

69 402.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

Paise Eighty Three Only

70 70.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred

Eighty Six Paise Eighty

71 70.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred

Twenty Paise Sixty Three

72 76.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 663.43 Rupees Six Hundred Sixty

Three Paise Fourty Three

73 144.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

74 504.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Each 186.83 Rupees One Hundred

polished bright. (i) 15mm dia. Eighty Six Paise Eighty

75 24.00 Providing and fixing bib cock with wall flange polish bright 15mm dia C.P.brass extension Each 2118.22 Rupees Two Thousand One

nipple 62mm long of Jaquar or equivalent Brand as directed by Engineer in charge and Hundred Eighteen Paise

where directed etc. complete. Twenty Two Only

76 280.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks Each 308.73 Rupees Three Hundred

and back nuts. (i) 15mm dia. Eight Paise Seventy Three

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

77 18.00 Providing and fixing pillar tap with Extension Body, capstan head, screw down high Each 2812.19 Rupees Two Thousand

pressure with screws, shanks and back nuts. of Jaquar or equivalent Brand as directed by Eight Hundred Twelve

Engineer in charge and where directed etc. complete. (i) 15mm dia. Paise Nineteen Only

78 154.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Each 282.16 Rupees Two Hundred

Eighty Two Paise Sixteen

79 12.00 Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Each 1751.69 Rupees One Thousand

Tube & Wall Hook of Jaquar or equivalent Brand as directed by Engineer in charge and Seven Hundred Fifty One

where directed etc. complete. Paise Sixty Nine Only

80 264.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

81 252.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

82 18.00 Providing and fixing washbasin of Jaquar or equivalent Brand with single hole for pillar tap Each 7262.16 Rupees Seven Thousand

with C.I. or M.S. brackets painted white including sutting holes and making good the same Two Hundred Sixty Two

but excluding fittings.(A) Vitreous China: (ii) Wall mounted Paise Sixteen Only

83 28.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S Each 1356.81 Rupees One Thousand

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

84 11.00 Providing and fixing wash down water closet Rimless, Blind Installation Wall Hung WC Each 15501.94 Rupees Fifteen Thousand

Pan with UF soft close slim seat cover of Jaquar or equivalent Brand with integral P or S Five Hundred One Paise

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Ninety Four Only

with Seal and cover Complete.

85 99.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Each 987.14 Rupees Nine Hundred

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Eighty Seven Paise

Vitreous China.(I) Long pattern = White colour Fourteen Only

86 156.00 Providing and fixing toilet paper holder.(A) C.P. Brass Each 427.99 Rupees Four Hundred

Twenty Seven Paise Ninety

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

87 276.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Each 616.42 Rupees Six Hundred

plugs with C.P. brass scews.(B) 600mm x 20mm size. Sixteen Paise Fourty Two

88 105000.00 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required Lit 3.95 Rupees Three Paise Ninety

capacity each with all necessary fittings and connection etc. complete on terrace. Five Only

(Confirming IS 12701) aprooved makes only.

89 86.00 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical No 2545.86 Rupees Two Thousand Five

gating complete. Hundred Fourty Five Paise

Eighty Six Only

90 76.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends each 2932.93 Rupees Two Thousand

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with Nine Hundred Thirty Two

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to Paise Ninety Three Only

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

91 50.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 2027.98 Rupees Two Thousand

finished with radium sticker including necessary scaffolding for fixing with epoxy material Twenty Seven Paise Ninety

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eight Only

consider as a half letter)

92 3801.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm SqM 706.93 Rupees Seven Hundred Six

thick with grade of concrete M250 pnumatic compressed/vibrated mechanically and as per Paise Ninety Three Only

approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018

etc. Complete. equivalent to vyara and saple must selected by office.

93 3711.00 Providing and fixing Pre-Cast Concrete Kerb Stone of gray cement based concrete block Rmt 374.92 Rupees Three Hundred

30cm. length, 30cm. height and 15cm. thick of M-250 Grade concrete as per approved Seventy Four Paise Ninety

design and including excavation for fixing in proper line and level, filling the joint with Two Only

C.M. 1:3 (1-Cement : 3-Fine Sand) etc. complete

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

94 400.00 Drilling of 215mm dia bore hole in over burden strata (alternative layer of lime stone and Rmt 551.46 Rupees Five Hundred Fifty

yellow stridly formation) by DTH regi. up to required depth including fixing of 175/180 dia One Paise Fourty Six Only

ERW/PVC pipe if required drilling by 165mm dia bore hole in hard rock strata DTH drilling

method up to total 120 mt.

95 440.00 HDPE Pipe for require dia. Rmt 551.46 Rupees Five Hundred Fifty

One Paise Fourty Six Only

96 2.00 Providing and fixing of M.S. Bore plug of required capacity etc. complete. No 1919.00 Rupees One Thousand Nine

Hundred Nineteen Only

97 430.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 659.99 Rupees Six Hundred Fifty

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Nine Paise Ninety Nine

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Only

daimeters.(i) 300mm dia.

98 680.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 1968.38 Rupees One Thousand Nine

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Hundred Sixty Eight Paise

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Thirty Eight Only

daimeters.(iii) 600mm dia.

99 34.00 Providing and constructing 'A' type Sewer manholes, scraper manhales and unit house No 18995.07 Rupees Eighteen Thousand

connection chamber, as per the type design m brick masonry m CM15 and inside and Nine Hundred Ninety Five

outside 20mm thick plastering in C. M 1-3 necessary 100 mm coping with reinforcement in Paise Seven Only

RC CM 200 fixing C 1 steps and fixing manhole frame and covers over manholes and house

connection chambers and fixing Manhole covers over scraper manhole etc complete.

providing and fixing safety chain wherever necessary as per the stipulations in the type

design complete as per latest CPHEEO manual.

100 406.00 Providing & laying weep hole in Aburtments, and returns by using PVC pipe of 100mm No. 86.70 Rupees Eighty Six Paise

including laying in proper grede and jointing the completed as per detailed specification. Seventy Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

101 721.00 supplying and fixing Razor Concertina Coil G.I. wire 600mm dia 1.33kg/Mt (Streched Rmt 767.60 Rupees Seven Hundred

Length) including galvanised steel barbed wire weight 9.38kg per 100 metre strained (6 Sixty Seven Paise Sixty

layer of Barbed Wire) and fixed with Mild steel Angle 40mm x 40mm x 6mm at every 3.0m Only

interval for fencing on masonary wall including a coat of priming coat of red oxide and two

coated of oil paint on M.S. Angle etc. as per engineer-in-charge etc. complete.

102 24.00 Providing and fixing cattle trap of required size and design by providing GI pipes 50mm dia SqM 6506.17 Rupees Six Thousand Five

at 10 cm c/c including providing “c" chanels 100x50x6x6mm size including necessary Hundred Six Paise

excavation 10 CM thick CC 1:2:4 for foundation complete CC wall of CC 1:3:6 with cement Seventeen Only

plaster 15mm thick in CM 1:4 etc. complete as directed by Engineer – in – Charge.

103 783.00 Road marking with hot applied thermoplastic paints with reflectorising glass beads on Sqm 367.72 Rupees Three Hundred

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick Sixty Seven Paise Seventy

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is Two Only

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should provide liminance coefficinet on cemend

road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during

the service life during the day time. The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity should be two years.

104 2015.00 Plantation of carpet type lawn including labour materials , watering and growing etc. and SqM 113.12 Rupees One Hundred

maintaining same upto six months. Thirteen Paise Twelve Only

105 605.00 Plantation of flower bed with selected flower plant including planting the same at 45 CM SqM 441.37 Rupees Four Hundred

apart and growing the same including maintenance upto six months. Fourty One Paise Thirty

106 270.00 Planting of hedge with selected hedge plant like Golden , Duranta, Red Bhaji or selected Rmt 207.05 Rupees Two Hundred

plant @ 45 CM apart and maintenance upto six months. Seven Paise Five Only

107 50.00 Planting of selected shrubb trees like Ticoma, Nerium or other selected plant including No 70.70 Rupees Seventy Paise

preparing pit of size 30 x 30 x 30 CM and filing with selected garden soil including manure, Seventy Only

fertilizer and maintenance up to six months.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

108 50.00 Providing Three plants having minimum 1.00 mt. hight and healthy growth of various kinds No 80.80 Rupees Eighty Paise Eighty

as like peltroform, Gulmahore, Karanj, Ambla, Rain tree, Sapparni, Cherry, Cryjeliya, Only

Spethodiya, Paras Pipala, Garmali, Neem, Borsalli, Kadam, Buch, Chanpo, Asopalav and as

109 50.00 Providing tree plants having minimum 1.00 mt height and health growth of bottle palm tree, No 2903.75 Rupees Two Thousand

Cycus palm and other palm tree planting including 30 x 30 x 30 Cm. pit filling with selected Nine Hundred Three Paise

garden soil including manure, fertilizer and maintenance upto six month. Seventy Five Only

110 22.00 Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including No 2731.34 Rupees Two Thousand

necessary excavating 23 Cum. brickwall, beding CC 1:2:4, top RCC slab, 15mm thick Seven Hundred Thirty One

plaster and connection of rain water pipes as per detail drawings and as directed by engineer Paise Thirty Four Only

111 330.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 297.80 Rupees Two Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Ninety Seven Paise Eighty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-110mm Dia

112 165.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 613.27 Rupees Six Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Thirteen Paise Twenty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Seven Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-160mm Dia

113 22.00 Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth No 13212.57 Rupees Thirteen Thousand

including necessary excavation 23cm brickwall beding CC 1:2:4 top RCC slab. 15mm thick Two Hundred Twelve Paise

plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt. Kapachi 10 to 12mm size Fifty Seven Only

and coarse sand 0.60 mt. etc. as directed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

114 7975.00 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in Kg 58.19 Rupees Fifty Eight Paise

position and applying a priming coat of red lead paint. (A) In beams and joists, channels Nineteen Only

angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like.

115 870.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The SqM 959.50 Rupees Nine Hundred Fifty

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Nine Paise Fifty Only

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

116 1412.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Pt. 485.81 Rupees Four Hundred

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Eighty Five Paise Eighty

length , in below type of pipe erected with 6A Modular type switch / bell push & One Only

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

117 523.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Pt. 242.91 Rupees Two Hundred

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Fourty Two Paise Ninety

length , in below type of pipe erected with 6A Modular type switch / bell push & One Only

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

Half Point For W/C

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

118 290.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI Pt. 674.68 Rupees Six Hundred

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Seventy Four Paise Sixty

in below type of pipe erected with 6A Modular type switch and hum free EME step type Eight Only

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

119 564.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 510.05 Rupees Five Hundred Ten

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in Paise Five Only

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

120 844.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 745.38 Rupees Seven Hundred

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in Fourty Five Paise Thirty

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on Eight Only

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

121 1574.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected Pt. 257.55 Rupees Two Hundred Fifty

on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Seven Paise Fifty Five Only

metallic/white front plate modules erected on / in wall / ceiling with following type

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

122 375.00 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 Pt. 603.98 Rupees Six Hundred Three

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand Paise Ninety Eight Only

copper wires erected in below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

123 131.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

124 131.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(4) TV Co-axial Socket outlet

125 1.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(8) Computer RJ-45 socket Cat.III

126 165.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 398.95 Rupees Three Hundred

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Ninety Eight Paise Ninety

front plate , modules erected with necessary connections as per site situation directed by Five Only

Engineer In charge.(5) Electronic hum Free steps EME Fan regulator

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

127 393.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 25.25 Rupees Twenty Five Paise

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Twenty Five Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single

128 4.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 494.90 Rupees Four Hundred

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Ninety Four Paise Ninety

front plate , modules erected with necessary connections as per site situation directed by Only

Engineer In charge.

(21) Foot Light as per colour requirement with concealed box, modular accessories, acrylic

glass cover with suitable LED watt with all accessories as per following module

(b) Four modules

129 3800.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr. 24.24 Rupees Twenty Four Paise

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Twenty Four Only

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

130 60.00 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, Mtr. 17.17 Rupees Seventeen Paise

PVC bushes, Check-nuts etc. complete of following sizes. Seventeen Only

131 8172.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 82.82 Rupees Eighty Two Paise

Copper conductor wire in following type of pipe to be erected concealed in /flushed on Eighty Two Only

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

132 2364.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 147.46 Rupees One Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Fourty Seven Paise Fourty

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Six Only

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

133 82.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 425.21 Rupees Four Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Twenty Five Paise Twenty

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth One Only

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

134 90.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 56.56 Rupees Fifty Six Paise Fifty

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Six Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(e) One wire 6.00 sq. mm

135 324.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 91.91 Rupees Ninety One Paise

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Ninety One Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm

136 84.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 236.34 Rupees Two Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Thirty Six Paise Thirty Four

erected in existing pipe of following size (Specifically for control panel, relays, power Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(h) One wire 25.00 sq. mm

137 6.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 300.98 Rupees Three Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Paise Ninety Eight Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(i) One wire 35.00 sq. mm

138 1336.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI Mtr. 46.46 Rupees Fourty Six Paise

marked copper wires of following size to be erected as directed. Fourty Six Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

139 1950.00 Providing & Erecting approved make following size of TV Co-axial flexible cable Mtr. 62.62 Rupees Sixty Two Paise

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Sixty Two Only

conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.

140 1950.00 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE Mtr. 14.14 Rupees Fourteen Paise

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS Fourteen Only

PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

141 25.00 Supplying & erecting approved make LAN cable of following size in existing pipe as per Mtr. 47.47 Rupees Fourty Seven Paise

direction Fourty Seven Only

142 1.00 Providing & erecting Switch board for Computer or electric apparatus consisting of Ea 1133.22 Rupees One Thousand One

following modular type accessories mounted with PVC / Metallic concealed/open box with Hundred Thirty Three Paise

single mounting base frame covered with textured/metallic /white front plate,modules Twenty Two Only

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

143 131.00 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 71.71 Rupees Seventy One Paise

Seventy One Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

144 520.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 373.70 Rupees Three Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Seventy Three Paise

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Seventy Only

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

145 279.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 535.30 Rupees Five Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Thirty Five Paise Thirty

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Only

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

146 1207.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, Ea. 112.11 Rupees One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Twelve Paise Eleven Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

147 132.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 4997.48 Rupees Four Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Nine Hundred Ninety Seven

and corrosion free High pressure die cast aluminum housing with smooth finish powder Paise Fourty Eight Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(ii) above 48 to 60 Watts

148 8.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 5599.44 Rupees Five Thousand Five

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Hundred Ninety Nine Paise

and corrosion free High pressure die cast aluminum housing with smooth finish powder Fourty Four Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(ii) above 48 to 60 Watts

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

149 16.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 10818.11 Rupees Ten Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Eight Hundred Eighteen

and corrosion free High pressure die cast aluminum housing with smooth finish powder Paise Eleven Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(vii) above 200 to 250 watts

150 73.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 4092.52 Rupees Four Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Ninety Two Paise Fifty Two

and corrosion free High pressure die cast aluminum housing with smooth finish powder Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP

(i)20- 30W Cat-lll

151 15.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 6173.12 Rupees Six Thousand One

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Hundred Seventy Three

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all Paise Twelve Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

152 10.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 6790.43 Rupees Six Thousand

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Seven Hundred Ninety

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all Paise Fourty Three Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only

Cat III ( Including 10% For Enclosure)

153 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 8055.76 Rupees Eight Thousand

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed Fifty Five Paise Seventy Six

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

154 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 8861.34 Rupees Eight Thousand

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed Eight Hundred Sixty One

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Paise Thirty Four Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

( Including 10% For Enclosure)

155 10.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter Ea. 4687.41 Rupees Four Thousand Six

connection suitable to following size of moulded case circuit breaker having CT ratio & Hundred Eighty Seven

MCCB rating as following along with shunt trip 220V AC. with all internal connections & Paise Fourty One Only

complete erected in existing M.S.housing..

156 1.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter Ea. 4983.34 Rupees Four Thousand

connection suitable to following size of moulded case circuit breaker having CT ratio & Nine Hundred Eighty Three

MCCB rating as following along with shunt trip 220V AC. with all internal connections & Paise Thirty Four Only

complete erected in existing M.S.housing..

157 10.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel Ea. 2611.86 Rupees Two Thousand Six

mounting with operating mechanism A.C.23 duty confirming to IS for Hundred Eleven Paise

(A)32-40A Cat-lll Eighty Six Only

158 2.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel Ea. 4785.38 Rupees Four Thousand

mounting with operating mechanism A.C.23 duty confirming to IS for Seven Hundred Eighty Five

(B)63 A Cat-lll Paise Thirty Eight Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

159 11.50 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 1961.42 Rupees One Thousand Nine

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Hundred Sixty One Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Fourty Two Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(A) Suitable for 100 Amp. Capacity

160 1.00 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 3202.71 Rupees Three Thousand

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Two Hundred Two Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Seventy One Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(B) Suitable for 200 Amp. capacity

161 213.00 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having Ea. 270.68 Rupees Two Hundred

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Seventy Paise Sixty Eight

162 1104.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate Ea. 112.11 Rupees One Hundred

on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Twelve Paise Eleven Only

confirming to IS 8828/1996 with ISI Mark

163 324.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Ea. 330.27 Rupees Three Hundred

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Thirty Paise Twenty Seven

following capacity Only

(B) 40 Amp. Cat.III

164 10.00 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having Ea. 638.32 Rupees Six Hundred Thirty

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Eight Paise Thirty Two Only

(b)40 Amp. Cat.III

165 49.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) Ea. 668.62 Rupees Six Hundred Sixty

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Eight Paise Sixty Two Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

166 5.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) Ea. 737.30 Rupees Seven Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Thirty Seven Paise Thirty

(c)63 Amp. Cat.III

167 5.00 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB Ea. 108.07 Rupees One Hundred Eight

Paise Seven Only

168 272.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Ea. 176.75 Rupees One Hundred

Seventy Six Paise Seventy

169 9.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 1152.41 Rupees One Thousand One

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Hundred Fifty Two Paise

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Fourty One Only

used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

170 126.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 1492.78 Rupees One Thousand Four

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Hundred Ninety Two Paise

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Seventy Eight Only

used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

171 5.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 3412.79 Rupees Three Thousand

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Four Hundred Twelve Paise

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Seventy Nine Only

used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(b) sheet steel double door

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

172 287.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 2235.13 Rupees Two Thousand Two

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Hundred Thirty Five Paise

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Thirteen Only

all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed

(ii) 40Amps. DP

173 320.00 Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Kg. 794.87 Rupees Seven Hundred

Transformer, LT panel board, Motors etc. using copper clamp. Ninety Four Paise Eighty

174 32.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Ea. 4591.46 Rupees Four Thousand Five

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free Hundred Ninety One Paise

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Fourty Six Only

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

175 14.12 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated Sq.Mtr 10468.65 Rupees Ten Thousand Four

indoor type cubical panel board necessary IP-42 and above protection as per approval from Hundred Sixty Eight Paise

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Sixty Five Only

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth

176 65.00 Providing and erecting Steel cover as per drawing using 16 SWG M.S.sheet of following Sq.Mtr 4228.87 Rupees Four Thousand

depth, to house the switch gear etc. complete with locking arrangement and lock with Two Hundred Twenty Eight

duplicate keys per cupboard and door handles erected with necessary support and painting. Paise Eighty Seven Only

[One coat red oxide and two coat enamel paint]

(A) with angle iron frame

(ii) For 40 cms. Depth

177 550.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Kg. 77.77 Rupees Seventy Seven

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with Paise Seventy Seven Only

cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with necessary grouting, cementing, plastering

& finishing complete.

178 330.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 183.82 Rupees One Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Eighty Three Paise Eighty

of following size of cables Two Only

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

179 20.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 284.82 Rupees Two Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Eighty Four Paise Eighty

of following size of cables Two Only

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

180 1215.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr. 126.25 Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Twenty Six Paise Twenty

trench / pipe of following size of cables Five Only

(B) 4 core 6 Sq. mm

181 1736.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr. 140.39 Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Fourty Paise Thirty Nine

trench / pipe of following size of cables Only

(C) 4 core 10 Sq. mm

182 130.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 153.52 Rupees One Hundred Fifty

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Three Paise Fifty Two Only

of following size of cables

(A) 4 core 16 Sq. mm

183 350.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Mtr. 676.70 Rupees Six Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Seventy Six Paise Seventy

at road crossing or floor of following size of cables. Only

(A) 4 core 10 Sq. mm

184 2980.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 74.74 Rupees Seventy Four Paise

laying any size of cable or locating the fault all over the run and back filling the same and Seventy Four Only

making the surface as normal ground.

185 40.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 357.54 Rupees Three Hundred

laying any size of cable or locating the fault all over the run and back filling the same and Fifty Seven Paise Fifty Four

making the surface as normal ground. Only

(B) If additional machinery like hammer driller or JCB use [Add]

186 40.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the Mtr. 226.24 Rupees Two Hundred

road crossing or on floor with necessary material in an approved manner and making the Twenty Six Paise Twenty

ground as per original. Four Only

(F) 100 mm dia.

187 2980.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 62.62 Rupees Sixty Two Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Sixty Two Only

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(A)50 mm outer dia

188 3.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 38.38 Rupees Thirty Eight Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Thirty Eight Only

(B) 2 to 4 core 6 Sq. mm

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

189 16.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 38.38 Rupees Thirty Eight Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Thirty Eight Only

(C) 2 to 4 core 10 Sq. mm

190 4.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 47.47 Rupees Fourty Seven Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Fourty Seven Only

(D) 2 to 4 core 16 Sq. mm

191 24.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 66.66 Rupees Sixty Six Paise

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Sixty Six Only

tape etc for following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

192 2.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 75.75 Rupees Seventy Five Paise

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Seventy Five Only

tape etc for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

193 12.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 6.06 Rupees Six Paise Six Only

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

194 16.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 13.13 Rupees Thirteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Thirteen Only

brass/cadmium plated nut bolts in an approved manner.

195 114.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 15.15 Rupees Fifteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Fifteen Only

brass/cadmium plated nut bolts in an approved manner.

196 6.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 20.20 Rupees Twenty Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Only

brass/cadmium plated nut bolts in an approved manner.

197 48.00 Solder less crimping type Copper lugs conforming to IS suitable for cable of following size Ea. 10.10 Rupees Ten Paise Ten Only

evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

198 455.00 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ea. 2885.57 Rupees Two Thousand

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class Eight Hundred Eighty Five

of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with Paise Fifty Seven Only

earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, with remote unit for Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for

140 to 285 Voltage and rectifier circuit with surge, over current and overload protection

50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

199 227.50 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod Mtr. 108.07 Rupees One Hundred Eight

erected duly painted for fan complete with proper insulation without leakage and earthing. Paise Seven Only

200 455.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up Ea. 108.07 Rupees One Hundred Eight

to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Paise Seven Only

complete erected concealed in Ceiling with necessary finishing.

201 455.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts Ea. 98.98 Rupees Ninety Eight Paise

erected with necessary hook of 10 mm M.S. Round Bar. Ninety Eight Only

202 455.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea. 18.18 Rupees Eighteen Paise

203 4.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame Ea. 1703.87 Rupees One Thousand

ABS body with inbuilt lowers & square frame. Seven Hundred Three Paise

200mm with 1350RPM Cat.II Eighty Seven Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

204 37.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 8252.71 Rupees Eight Thousand

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Two Hundred Fifty Two

having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Seventy One Only

shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination

box with necessary accessories . The size of pole and type of installation with foundation as

per manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[B] Overall length of 3 Mtr Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/130mm ± 2mm approx. Weight of Pole: 12 kg approx.

(Without Base) Anchor Base (Size 250X250 & 12mm th.)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

205 9.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 11719.03 Rupees Eleven Thousand

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Seven Hundred Nineteen

having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Three Only

shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination

box with necessary accessories . The size of pole and type of installation with foundation as

per manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[F] Overall length of 5 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without

Base) Anchor Base (Size 250X250 & 16mm th.)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

206 53.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 12425.02 Rupees Twelve Thousand

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Four Hundred Twenty Five

having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Two Only

shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination

box with necessary accessories . The size of pole and type of installation with foundation as

per manufacturer details and site requirement are as below .

(2) Suitable for base plate mounting Double arm Bracket.

[A] Overall length of 5 Mtr. Average Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/163mm ± 2mm approx.approx. Weight of Pole 31 kg approx.

(Without Base) Anchor Base (Size 300X300 &18mm th.)

( With Withstand Capacity Triple and Four Bracket Arm )

207 9.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea. 2234.12 Rupees Two Thousand Two

the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Hundred Thirty Four Paise

(A) Single arm bracket Twelve Only

208 41.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea 3450.16 Rupees Three Thousand

the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Four Hundred Fifty Paise

(B) Double arm bracket Sixteen Only

209 7.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea 4447.03 Rupees Four Thousand

the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Four Hundred Fourty Seven

(C) Triple arm bracket Paise Three Only

210 44.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- Ea. 476.72 Rupees Four Hundred

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Seventy Six Paise Seventy

for mounting mob & hinged doors as per requirement having locking arrangements with Two Only

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(C)150mm x 125mm x 100mm [deep]

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

211 5.00 Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 Ea. 1252.40 Rupees One Thousand Two

cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx. Hundred Fifty Two Paise

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient Fourty Only

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per

site condition & suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.

[D] Four Arm Bracket 1 Mtr

212 2.00 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less Ea. 16691.26 Rupees Sixteen Thousand

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be Six Hundred Ninety One

buried in ground to have appropriate erection to work uniform until erected with cement Paise Twenty Six Only

concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side,

with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested as per IP 55 test

& followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron

legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

213 67.00 Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness sq.mtr 1541.26 Rupees One Thousand Five

(D) 8mm Hundred Fourty One Paise

Twenty Six Only

214 10.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years Ea. 3168.37 Rupees Three Thousand

operative and operate battery backup 1 channel day clock with 14 memory programme, One Hundred Sixty Eight

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup Paise Thirty Seven Only

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as directed.

215 10.00 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per Ea. 2782.55 Rupees Two Thousand

direction Cat III Seven Hundred Eighty Two

(D) 4 pole 440V 40 Amp. Paise Fifty Five Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

216 2.00 Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole Ea 173088.75 Rupees One Lakh Seventy

having following general Specification. Three Thousand Eighty

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep Eight Paise Seventy Five

galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and Only

rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary

wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and switchgears having door

not more than 1400mm x 300mm with waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & commissioning of

the entire structure for following size of High Mast poles

[3] High Mast 16 Mtr. TOP A/F 150 mm, BOTTOM A/F 450 mm, No. of Sec. No. -

Bottom Thickness - 4 mm, Top Sec. 3 mm, Size of Base Plate - dia.560 mm x 20 mm thick,

Foundation Bolt Size M24 x 880 mm, Qty - 8 Nos., Suitable for mounting Fitting of Light -

217 11.00 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 Ea. 1275.63 Rupees One Thousand Two

digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Hundred Seventy Five Paise

connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only

218 11.00 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 Ea. 1558.43 Rupees One Thousand Five

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate Hundred Fifty Eight Paise

on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with Fourty Three Only

manufacturers calibration certificate.

219 20.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V Ea. 317.14 Rupees Three Hundred

on existing panel board with necessary connections. Seventeen Paise Fourteen

220 33.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 Ea. 274.72 Rupees Two Hundred

VA burden erected in existing CRCA box duly secured with insulating materials connected Seventy Four Paise Seventy

to the meter Two Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

221 39.00 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, Ea. 43.43 Rupees Fourty Three Paise

complete erected with necessary connections. Fourty Three Only

222 3.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 10734.28 Rupees Ten Thousand

complete for three phase submersible motor having Seven Hundred Thirty Four

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ Paise Twenty Eight Only

25 mtr head suitable for 50 mm dia delivery pipe Cat.II

223 6.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 15707.52 Rupees Fifteen Thousand

complete for three phase submersible motor having Seven Hundred Seven Paise

[C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 Fifty Two Only

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe Cat.II

224 12.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 18746.61 Rupees Eighteen Thousand

complete for three phase submersible motor having Seven Hundred Fourty Six

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to Paise Sixty One Only

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe Cat.II

225 4.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 28464.83 Rupees Twenty Eight

complete for three phase submersible motor having Thousand Four Hundred

[F] For 10 HP 3 phase open well horizontal mono block pump set suitable for 1725 LPM to Sixty Four Paise Eighty

940 LPM @ 15 to 36 MTR head suitable for 65/80 mm dia delivery pipe Three Only

226 22.00 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made Ea. 7722.46 Rupees Seven Thousand

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Seven Hundred Twenty

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) Two Paise Fourty Six Only

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

227 5.00 Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) Ea. 13605.71 Rupees Thirteen Thousand

made from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside Six Hundred Five Paise

with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator Seventy One Only

(AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete

unit), Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y-

B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each

with two way selector switch incoming wires duly socket Crimped, Panel to be erected on

angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay,

thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on

angle iron frame ground on wall.

228 1.00 S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three phase Ea. 20901.95 Rupees Twenty Thousand

motor capacity not more than 3 H.P. of different range with following capacity . Lifting and Nine Hundred One Paise

Lowering taken extra. Ninety Five Only

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs. Respectively head suitable for

50 mm dia. delivery pipe

229 1.00 S.I.T.C. submersible pump set suitable for bore of 150 mm dia or more having 3 phase Ea. 44401.62 Rupees Fourty Four

motor capacity not less than 10 HP with following capacity. Lifting and Lowering taken Thousand Four Hundred

extra. One Paise Sixty Two Only

[B] 20 stage 210 to 160 LPM discharge at 148 to 173 mtr head for 50 mm dia delivery pipe

230 2.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 2996.67 Rupees Two Thousand

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Nine Hundred Ninety Six

wrenches after checking of threads of each pipe with coupling to take the load of the pump Paise Sixty Seven Only

set and pipe assembly filled up with water

(C)Above 120 mtr.

231 21.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 856.48 Rupees Eight Hundred Fifty

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Six Paise Fourty Eight Only

wrenches after checking of threads of each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water

.(D)For Open well Horizontal submersible pump set for sump well

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

232 4.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 1284.72 Rupees One Thousand Two

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Hundred Eighty Four Paise

wrenches after checking of threads of each pipe with coupling to take the load of the pump Seventy Two Only

set and pipe assembly filled up with water

(D)For Open well Horizontal submersible pump set for sump well

233 320.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 104.03 Rupees One Hundred Four

copper cable approved make of following Size. Paise Three Only

(B) 3 Core x 2.5 Sq. mm.

234 240.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 146.45 Rupees One Hundred

copper cable approved make of following Size. Fourty Six Paise Fourty

(C) 3 Core x 4 Sq. mm Five Only

235 310.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 172.71 Rupees One Hundred

copper cable approved make of following Size. Seventy Two Paise Seventy

(D) 3 Core x 6 Sq. mm. One Only

236 81.00 Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using Ea. 189.88 Rupees One Hundred

insulating material, water proofing material, & making the joint complete. Eighty Nine Paise Eighty

(A) Up to 10Sq. mm Eight Only

237 315.00 Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock RMT. 359.56 Rupees Three Hundred

[B] 50 mm dia Fifty Nine Paise Fifty Six

238 60.00 Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock RMT. 493.89 Rupees Four Hundred

[C] 65 mm dia Ninety Three Paise Eighty

239 23.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump Per Set 1489.75 Rupees One Thousand Four

guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed Hundred Eighty Nine Paise

by Engineer - in - charge with necessary plumbing as desired. Seventy Five Only

240 4.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump Per Set 1900.82 Rupees One Thousand Nine

guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed Hundred Paise Eighty Two

by Engineer - in - charge with necessary plumbing as desired. Only

241 9.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm Ea. 9416.23 Rupees Nine Thousand

long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse Four Hundred Sixteen Paise

current withstand test: 100 kA of 10/350µs waveform in an accredited Third party Twenty Three Only

laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm

long- Cold Galvanized

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

242 370.00 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and Mtr. 728.21 Rupees Seven Hundred

use exclusively for lightning protection (Vertical Riser/Down Conductor which shall be Twenty Eight Paise Twenty

concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With One Only

Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector

used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross

Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight

Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every

3 mtr suitable for interconnecting round conductor with reinforcement inside the concrete

for structural earthing system, SS connector -To connect external conductor 8- 10 mm with

earth fixing point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for

conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test )

conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to

meet the requirements of IS/IEC

243 18.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground Mtr. 154.53 Rupees One Hundred Fifty

as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used Four Paise Fifty Three Only

exclusively for lightning protection earthing system and ring equipotential bonding.

244 18.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 Per Set 5992.33 Rupees Five Thousand

micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as Nine Hundred Ninety Two

per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Paise Thirty Three Only

clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

245 2.00 Supplying, Erecting, Testing & Commissioning the passenger/ stretcher lift as per prevalling Ea. 1676455.57 Rupees Sixteen Lakh

IS Code having Following main fetures: Seventy Six Thousand Four

8 / 10 Passengers,. Ground plus 4 upper floor with Rated Speed of 1.0 m/sec., Hundred Fifty Five Paise

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Fifty Seven Only

(A) GENERAL DESCRIPTION OF LIFTS.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase

V A. C. Permanent Magnet Synchronous motor of proper rating with high efficiency shall

[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door operation which shall be full collective

selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load

cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer

in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening

/ telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop

device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons

and all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/

telescopic opening made of hairline finish steel grade of 304 with key holes and infrared

curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be

provided. Also, Emergency Light & Fan should start immediately without any Time Delay

as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator

shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be

provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger

capacity with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that

doors kept open till excess load is removed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in

[14] Mechanical over speed governor with governor calibration as per actual site parameters

and submission of calibration certificate submission, door key holes in the floor doors,

fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift

pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever

required as / if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well

with proper numbers of light points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be made available by department

in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out

third party lift inspection during/after lift erection and provide report by third party

authorized by concern licensing authority 5.agency has to provide third party insurance

upto completion of free maintenance period and submit the document for the same.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto

Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade

of 304 should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car.

(Voltage Protection Provide With Servo Voltage Stabilizer With Required Capacity)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and

hall lantern & TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must have fire rating up to 2 hours and car door

must have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile

app and user id and password for monitoring

246 4.00 Supplying, Erecting, Testing & Commissioning the passenger/ stretcher lift as per prevalling Ea 1777293.97 Rupees Seventeen Lakh

IS Code having Following main fetures: Seventy Seven Thousand

8 / 10 Passengers, Ground plus 5 upper floor with Rated Speed of 1.0 / 1.5 m/sec., Two Hundred Ninety Three

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Paise Ninety Seven Only

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase

V A. C. Permanent Magnet Synchronous motor of proper rating with high efficiency shall

[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door operation which shall be full collective

selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety controls.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[3] Car with M S platform with bracings of adequate size and to sustain the impact load

cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer

in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening

/ telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop

device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons

and all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/

telescopic opening made of hairline finish steel grade of 304 with key holes and infrared

curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be

provided. Also, Emergency Light & Fan should start immediately without any Time Delay

as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator

shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be

provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger

capacity with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that

doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in

[14] Mechanical over speed governor with governor calibration as per actual site parameters

and submission of calibration certificate submission, door key holes in the floor doors,

fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift

pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever

required as / if directed by engineer in charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well

with proper numbers of light points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be made available by department

in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out

third party lift inspection during/after lift erection and provide report by third party

authorized by concern licensing authority 5.agency has to provide third party insurance

upto completion of free maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto

Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade

of 304 should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car.

(Voltage Protection Provide With Servo Voltage Stabilizer With Required Capacity)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and

hall lantern & TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must have fire rating up to 2 hours and car door

must have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile

app and user id and password for monitoring

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and

hall lantern & TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must have fire rating up to 2 hours and car door

must have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile

app and user id and password for monitoring

Amount in Words :

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

(Please strike out whichever is not applicable)

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Contractor Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division