POST CONSTURCTION ANTI-TERMITE TREATMENT AND MISC B/R REPAIRS TO CERTAIN BUILDINGS AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for Providing Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Providing Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing wall complete all as specified and directed.

M&L for Providing Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed.

M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles thickness not less than 7mm size of tiles 450mmx300mm as in skirting / dado etc laid jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for light shed vitrified coloured tiles not less than 10 mm thick of size 600x600mm in floors/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in CM 1:6 complete all as specified and directed.

Dismantling of granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of Granite stone slabs edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level, including removal of debries outside MOD land complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10 mm thick rendering in cement mortar 1:6 (as first coat) on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of distemper oil emulsion over a coat of primer over and including cement base wall cair Putty on wall surfaces complete all as specified and directed.

M&L for preparation of pastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick II class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for 100mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repair 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in Repairs for mild steel butt hinges medium grade 100 mm size Complete all as specified.and directed.

S & F in Repairs for mild steel butt hinges, medium grade 75mm size complete all as specified and directed.

S & F in Repairs 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in Repairs 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in Repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs Hasp and staple 75mm size, of aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repair 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frame work or ply wood for kitchen cupboard, shelves and cupboard complete all as specified and directed.

M & L 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive for kitchen cupboard,shelves and cupboard as per manufacturer's instructions complete all as specified and directed.

S&F 75mm size SS cup board hinges medium weight cold rolled complete all as specified and directed.

S&F Magnatic catcher and connected plate to shutters and frame as per Sample.

S&F 100mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F in repair Telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty etc complete all as specified and directed.

S&F second class HW plain fillets, square / rectangular, wrought face of sectional area exc 13 Sqcm but n.exc 25 Sqcm, securing with screw complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 300 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface,cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding,formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3 , finishing the surface even & smooth with out using extra cement complete all as specified and directed. Note : Reinft will be paid separately.

M&L for MS steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces wall and application of 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for preparation of existing treatment of old surface including brooming down, scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed.

M&L for preparation of old decorated by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

MADHAV ENTERPRISE

Gayatri Construction Co