Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.3 L+₹38,481.80 (0.96%)Rejected-Finance | L2 | Rejected-Finance OTHER THEN LWEST BIDDER | |
| 3 | L3₹41.1 L+₹1.2 L (3.09%)Rejected-Finance GAIRKATA ROAD POST BINNAGURI PIN 735 203 DIST JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L3 | Rejected-Finance OTHER THEN LWEST BIDDER | |
| 4 | L4₹42.7 L+₹2.8 L (7.04%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THEN LWEST BIDDER | |
| 5 | L5₹43.0 L+₹3.0 L (7.64%)Rejected-Finance NIL | THE NILGIRIS | TAMIL NADU | 638451 | L5 | Rejected-Finance OTHER THEN LWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
REPAIR AND REPLACEMENT OF JOINARY AND OTHER MISC AT MD, OTM, MES AREA AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI
2022_MES_522658_1
8491/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹90,000
Yes
18 Jun 2022
7 May 2022
30 May 2022
7 May 2022
28 May 2022
21 May 2022
60 days
Amount
Schedule 'A'
Taking down Chowkhats or frames exc. 1.5 sqm but not exe 4.00 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directred
Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directred
Taking down shutters of any description exc. 1 Sqm and n.exc 2 Sqm complete all as specified and directred
Repairs for wooden Doors shutters and windows for proper closing/opening including necessary cutting, filling, painting with synthetic enamel paint to match existing finishes Complete all as specified and as directed.
Restraining and rescuring of aluminium section of shutter and frame, including proper adjustment of floor spring, and fixing of new rubber gasket etc of existing door for proper functioning of each shutter n exc 2 sqm Complete all as specified and as directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc. Complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips.
S&F of 3mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.
S&F of Figured glass, pin head type 4mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
M&L for providing PCC (1:3:6) type C1 (20mm graded aggregate) as in coping, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water trough and like complete as specified and as directed.
S&F for pressed steel frames 125x60mm size for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F for pressed steel frames 105x60mm size for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed.
S&F 35mm thick second class hard wood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L second class Hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, complete all as specified and directed.
S&F in repair factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F in repair factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F in repair factory made Z section steel ventilator with top hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.
S&F of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.
S&F of Powder coated aluminium louvered ventilators of size 600x600 mm with glass louvers, without sash bars of aluminium section weighing not less than 0.605 kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.
S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & buttom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slolvent cement, supplying & fixing in the frame at site as per manufactures instruction complete all as specifeid and directed
Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete as directed.
S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with tinned tadked or galvanised wire staples or wooden beadings for doors complete all as specified and as directed.
S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed
S&F angle iron, MS flat iron in wind ties and similar work confirming to Fe -410or Fe -310complete all as specified and as directed by the Engr-in-charge.
S & F Mild steel work in framed work such as in gates,grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed.
S&F Rolled sections conforming to Fe -410 (Gde E- 250)as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed .
S&F in repair 12mm thick particle board,medium density,flat pressed,three layertype with BWR type adhessive,fixed with screws to timber frame work complete all as specified and directed.
S&F in repair 18/19mm thick particle board,medium density,flat pressed,three layertype with BWR type adhessive,fixed with screws to timber frame work including 4 mm thick Teakwood leaping alround as in cup board shelves and shutters complete all as specified and directed.
S&F 8/9mm thick PVC ceiling / wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of pvc content including necessary H- joints, internal/external corner trim, corner trim, F/J edge trims where reqquired fixed with hidden screw to and including steel/wooden frame work of width 75mm complete all as specified and directed.
S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm of approved texture and finished complete with two coats of oil based distemper over a coat of alkali resistance primer on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S&F in repair of 2nd class hardwood small fitting n. exc 200cu.cm such as brackets of any type hinge block, shapped door window stop etc. complete all as specified and directed.
M&L for preparation of newly or previously untreated surfaces of wood and based surfaces of any description, over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for preparation of old painted surfaces of wood and based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of old painted surfaces of steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of newly or previously untreated surfaces of new steel surfaces of any description, over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed
M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based wall care putty including complete removal of existing treatment all as specified and directed.
M&L for preparing of newly plastered surfaces of wall including cornices etc by brooming down applying two coats of antifungal exterior acrylic emulsion paint over a coat of acrylic primer complete all as specified and directed.
S&F sliding door bolt of 250mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F in repair sliding door bolt of 250mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F aluminium handle cast type anodiside of 150 mm size complete all as specied and directed.
S&F in repair aluminium handle cast type anodiside of 150 mm size complete all as specied and directed.
S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.
S&F in repair 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.
S&F 100 mm mild steel butt hinges etc complete all as specified and directed.
S&F in repair 100 mm mild steel butt hinges etc complete all as specified and directed.
S&F in repair 75 mm stainless steel butt hinges etc complete all as specified and directed.
S & F in repairs 25 mm Curtain rod stainless steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M & L for glazed ceramic colour tiles 450X350X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick in cement mortor 1:4 approved by Engr-in-Charge complete all as specified and directed.
S&F continuous (piano) hinges width of flap 30mm, mild steel bright finish or electrogalvanised complete all as specified and directed.
S&F in repair Hasp and staple, aluminium anodised , 100mm long including bolt to hinge plate and fixed with screw complete all as specified and directed.
S&F Hasp and staple, aluminium anodised , 100mm long including bolt to hinge plate and fixed with screw complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and fair without using extra cement complete all as specified and as directed.
M&L for external rendering 20 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 10 mm thick in CM 1:4 mixed with WPC as per manufacturer instruction by weight of cement on brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. Note-WPC shall be measured and paid seperately.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed .
M/s. RAMPHAL GARG
M/S VIRENDRA KUMAR SINGH
M/S MOHAN KUMAR BANSAL
SG ENTERPRISE
M/S MAJUMDER CONSTRUCTION
samrat saw mill and joinery workshop
S.N. GHOSH AND CO.
M/S NIKITA ENGINEERING CO
Biswanath Sharma
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .