Building Works

Name of Work :: Construction of New Clinic Animal Husbandry at Sevaliya

Ta.Galteshwar Dist. Kheda.

BILL OF QUANTITIES

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[1] Excavation for foundation upto 1.5 m depth including 224.800 Cum 149.670

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

[2] Excavation for foundation for depth from 1.5 m to 3.0 m 89.400 Cum 282.900

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

[3] Excavation for foundation for depth from 3.0 m to 5.0 m 28.200 Cum 285.730

including sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50 Meter lead.(C)

[4] Filling available excavated earth (excluding rock) in 287.300 Cum 130.390

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering

[5] Filling foundation and plinth with murrum or selected soil 900.000 Cum 282.020

in layer of 20 cm in thickness including ramming watering

and consolidating etc. Complete.

[6] Carrying out plinth treatment to post construction / 262.100 Sqm 124.280

existing structure by spraying chemical solution for termite

control treatment including labour and material consistent

with I.S.I specification. Using Chlordane and Chiorpurfiles

20 EC. As Per 6131_paret-II Concentration Weight one

percent is recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1 % concentration inclusive of

one litre chemical emulsion application at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S.

[7] Providing and laying cement concrete 1:2:4 (1- Cement : 2- 16.200 Cum 3652.510

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth.

[8] Providing and laying controlled cement concrete M-250 40.300 Cum 4498.570

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in foundation footings, Raft, base of

columns and mass concrete.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[9] Providing and laying controlled cement concrete M-250 11.800 Cum 7601.310

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts G.FLOOR.

[10] Providing and laying controlled cement concrete M.150 for 36.100 Cum 3860.160

curing complete including cost of formwork and

reinforcement for reinforced concrete work in (A) PCC

[11] Providing and laying controlled cement concrete M-200 17.500 Cum 7547.080

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts.For GF

[12] Providing and laying controlled cement concrete M-200 6.100 Cum 7586.880

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts For First

[13] Providing and laying controlled cement concrete M-250 39.100 Cum 5940.720

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Plinth BEAMS.

[14] Providing and laying controlled cement concrete M-200 29.100 Cum 6072.090

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in GF BEAMS.

[15] Providing and laying controlled cement concrete M-200 2.300 Cum 6111.880

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in BEAMS First Floor.

[16] Providing and laying controlled cement concrete M-200 7.300 Cum 7447.350

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels Ground Floor.

[17] Providing and laying controlled cement concrete M-200 for 1.700 Cum 8046.110

reinforced concrete CHHAJJAS not exceeding 10 cm.

Thickness up to floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1cement :3 fine

sand) to give a smooth surface centering and form work

and curing complete excluding cost of reinforcement.

[18] Providing and laying controlled cement concrete M-200 38.500 Cum 6127.620

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in GF SLAB.

[19] Providing and laying controlled cement concrete M-200 2.900 Cum 6167.410

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in SLABS for First Floor.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[20] Providing and laying controlled cement concrete M-200 3.500 Cum 7146.010

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in STAIRCASE for Ground Floor.

[21] Providing T M T. bar reinforcement of Fe-500 for R.C.C. 27960.400 Kgs. 76.210

work including bending binding and placing in position

complete up to All floor Level.

[22] Brick work using common burnt clay building bricks having 47.200 Cum 4051.780

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5 (1 Cement : 5 Fine Sand)

(B) Conventional.

[23] Brickwork using common burnt clay building bricks having 128.800 Cum 4320.080

crushing strength not less than 35 kg. / Sq.cm. In super

structure above plinth level upto floor two level in Cement

Mortar 1:5 (1 Cement : 5 Fine Sand) Extra for brick work in

superstructure above plinth level upto floor two level.

[24] Half brick Masonry in common brunt clay building bricks 38.500 Sqm 641.160

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1 Cement : 5 Coarse Sand) in

foundation and plinth + Extra for half brick masonry in

superstructure above plinth level upto floor two level (B)

[25] Providing and fixing Double shutter teak wood door using 3.600 Sqm 2894.990

100mmx50mm teak wood frame, and S.S. Hinges welded

for door frame, hollow portion of door frame shall be filled

with Cement Mortar 1:6 and 35 mm thick Factory Pressed

flush door with 75mmx35mm with 2 x 3 Cm and

Decorative Lamination of 1mm th.lamination sheet on both

side, and Teakwood moulding strip on both side, Stainless

steel hinges, Stainless steel ASIS 304 grade Stopper 20cm

long, Aldrop 20 cm long, handle 15 cm long, including

melamine polishing on Teakwood molding patti. etc.

complete as per detailed drawing.

[26] Providing and Fixing Single Shuttered Door having 35 mm 24.000 Sqm 2927.650

thick Factory Pressed flush door with 75mmx35mm teak

wood beading of natural wood grain shade , having

Decorative Lamination on both sides & 12 mm ,Stainless

steel ASIS 304 grade Stopper 20cm long, Aldrop 20 Cm

long, handle 15 cm long, etc complete as per detailed

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[27] Providing and fixing FRP frame size 100 X 50 mm and 28 3.200 Sqm 2377.760

mm thick FRP shutter with depressed panel shutter having

reinforcement on sides and edges and in GEL coat finish.

The core of shutter is to be filled up with injected fibre

extinguishing grade polyurethane foam done in situ along

with embedded wooden pieces for stiffening and also for

taking hinges and fixtures. The whole FRP frame and

shutter is to be water proof, weatherproof, termite proof

and resistance to mild acid/ Alkali resistance including S.S.

hinges with necessary screws and alluminium fixtures and

[28] Providing and fixing window having extruded alluminum 31.500 Sqm 1583.950

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (wt. of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mm x 18mm x 1.29mm (@ wt. of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm

@ wt. of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated alluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

[29] Providing and fixing standard extruded of alluminium 12.600 Sqm 1525.000

section of size 63.50 x 38.10 x 1.95 mm(@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for For light entrant above window.

[30] Providing and fixing standard extruded of alluminium 2.700 Sqm 1175.560

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

:2434, @ Wt. 0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Louvered type Ventilator.

[31] Providing and fixing Safety grills of required pattern for 1392.900 Kgs. 107.320

windows / Door using 12 mm dia M.S polished bars,

Angles / pipes for frame as directed & spacing as per

Design / Drawing or as directed by engineer in charge and

hold fasting with coach bolts including one coat of primer

and two coats of mattfinished oil painting etc complete.

[32] Providingand Laying 24" x 24" Soluble Salt vitrified 8 mm 18.700 Sqm 1282.240

thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for DARK shade.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[33] Providng and Laying 24" x 24" Soluble Salt vitrified 8 mm 187.000 Sqm 1397.830

thick tile flooring over 20 mm (average) base of cement

mortar 1:6 (1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

[34] Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 4.600 Sqm 1141.450

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 Cement : 3 Coarse Sand) and jointed

with White Cement slurry.

[35] Providing and laying Machine Cut, Free Edges, Mirror 42.600 Sqm 2621.870

polished GRANITE stone slab in single piece, 18 mm

(Average) thick for steps and riser as per design incl. Half

round front edge & 1 cm nosing in trade of steps laid on

mm thick cement mortar 1:6 (1 cement : 6 coarse sand )

on treads & 10 mm thick Cement mortar 1:3 for risers,

jointed with grey cement slurry including rubbing and

polishing etc. complete.

[36] Providing and laying Antiskid Ceramic tiles 6mm thick in 271.000 Sqm 949.680

flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

[37] Providing and laying coloured glazed tiles of the size 300 492.000 Sqm 1417.360

mm x 600mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

[38] Providing and fixing pre-cast Rubber Dye / steel Dye inter 488.300 Sqm 686.900

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

[39] Providing and fixing pre-cast Concrete Kerb stone of gray 90.300 Rmt 384.960

cement based concrete block 30cm length, 30 cm. height

and 15 cm. thick of M200 grade concret as per approved

design and including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1 Cement : 3 Fine Sand)

[40] Providing and laying Mirror polished Telephone Black 63.500 Sqm 3387.370

Granite slab 18 mm (Average) thick as per design incl. Half

Round moulded both edges laid on 10 mm thick cement

mortar 1:3 (1 -cement : 6 coarse sand) jointed with grey

cement slurry including rubbing and polishing and G.I.

fastenings for top horizontal as directed etc. complete. For

Doors / WIndows cill & Jams Clading.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[41] Providing 20 mm thick double coat mala cement plaster on 95.100 Sqm 270.430

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

[42] Providing 20 mm thick double coat mala cement plaster on 34.002 Sqm 296.360

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

[43] Providing 10 mm. thick cement plaster by using Ready Mix 784.100 Sqm 132.460

Mortar for plaster in single coat on brick/ concrete walls for

interior plastering upto floor two level and finished even

and smooth in Cement mortar 1:6 (1 Cement : 6 sand) for

plastering on ceilings and sofits of stairs upto floor two

level instead of plastering on walls for Ground Floor.

[44] Providing 10 mm. thick cement plaster by using Ready Mix 15.100 Sqm 128.490

Mortar for plaster in single coat on brick/ concrete walls for

interior plastering upto floor two level and finished even

and smooth in Cement mortar 1:6 (1 Cement : 6 sand) for

plastering on ceiling and soffits of stairs above floor two

level for every additional storey height for First Floor.

[45] Providing 20 mm. thick Water Proof cement plaster for 59.200 Sqm 357.070

sunk in single coat on brick / concrete wall for interior

plastering up to floor two level finished even and smooth

(i) Cement mortar 1:3 (1-cement : 3-sand) and mixing

waterproofing materials of approved brand and

manufacture in cement mortar in proportion

recommended by the manufacturer.

[46] Applying two coats of putty & two coats of primer of 444.400 Sqm 40.590

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth..

[47] Wall painting (two coats) with plastic emulsion paint of 444.400 Sqm 119.420

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

[48] 20 mm. thick Sand Faced Cement Plaster on walls upto 705.000 Sqm 335.650

height 10 metres above ground level consisting of 12 mm.

thick backing coat of C.M. 1:3 (1 Cement : 3 Sand) and

mm. thick finishing coat of C.M. 1:1 (1 Cement : 1 Sand)

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[49] Finishing wall with weather proof exterior emulsion paint 705.000 Sqm 114.530

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials etc

[50] Providing and fixing chicken mesh jali with square of 12.50 209.500 Sqm 104.540

x 12.50 mm of 25 gauge at junction the stone. masonary

and reinforcement cement concrete member including

fixing materials scaffolding labour etc. Complete.

[51] Providing laying and jointing in true line and level 15mm 50.000 Rmt 72.650

dia. U.P.V.C. Pipe ( SCH-40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

[52] Providing laying and jointing in true line and level 25mm 60.000 Rmt 91.840

dia. U.P.V.C. Pipe ( SCH-40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

[53] Providing laying and jointing in true line and level 40 mm 100.000 Rmt 148.120

dia. U.P.V.C. Pipe ( SCH-40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

[54] Providing laying and jointing in true line and level 50 mm 100.000 Rmt 195.670

dia. U.P.V.C. Pipe ( SCH-40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

[55] Providing and fixing Gun Metal Wheel valve of aprroved 4.000 Nos. 360.350

brand & follwing internal dia of Brass including fixing in

pipe lines etc.complete (C) 25 mm Dia.

[56] Providing and fixing Gun Metal Wheel valve of aprroved 2.000 Nos. 269.620

brand & follwing internal dia of Brass including fixing in

pipe lines etc.complete (D) 32 mm Dia.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[57] Providing and fixing Gun Metal Wheel valve of aprroved 4.000 Nos. 568.340

brand & follwing internal dia of Brass including fixing in

pipe lines etc.complete (E) 40 mm Dia.

[58] Providing and fixing to wall, ceiling and floor galvanised 20.000 Rmt 397.870

mild steel tubes (Medium grade) of the following nominal

bore, tube, fittings and clamps included making good the

wall, ceiling and floor. (C) 25 mm.

[59] Providing and fixing to wall, ceiling and floor galvanised 30.000 Rmt 246.570

mild steel tubes (Medium grade) of the following nominal

bore, tube, fittings and clamps included making good the

wall, ceiling and floor. (A) 15 mm.

[60] Providing and fixing to wall ceiling floor 10 Kg. F/Cm2 30.000 Rmt 277.430

working pressure polythene pipes for soil waste and

ventilating pipes of the following outside dia. low density,

complete with necessary fittings, wall clamps etc including

making good the wall ceiling and floor. (Finolex, Supreme,

Prince or equivalent brand) (F) 75 mm.

[61] Providing laying and jointing in true line and level 110 181.000 Rmt 835.150

diameter U.P.V.C. SWR Type B pipe confirming to IS 13592-

1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm

diameter x 149 mm length x 145 mm high at every

mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

[62] Providing laying and jointing in true line and level 160 85.000 Rmt 831.220

diameter U.P.V.C. SWR Type B pipe confirming to IS 13592-

1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm

diameter x 210 mm length x 196 mm high at every

mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials

[63] Providing and fixing PVC Cowl vent of following dia etc 3.000 Nos. 389.740

complete as directed. (A) 75 mm Dia.

[64] Providing and fixing PVC Cowl vent of following dia etc 3.000 Nos. 501.870

complete as directed. (B) 100 mm Dia.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[65] Providing and fixing PVC SWR Nahni Trap IS 14735 for drain 5.000 Nos. 558.360

- 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I. screwed down or

hinged grating including the cost of cutting and making

good the walls.

[66] Providing and fixing Screw down bib taps of following size. 4.000 Nos. 186.830

(B) Brass Chromium plated screws down Bib Tap. (i) 15mm

[67] Providing and fixing wash basin with pedestal of std. Height 3.000 Nos. 2332.210

with single hole for pillar tap with C.I or M.S brackets

painted white / fixing in granite platform including cutting

holes and making goods the same including C.P. brass

waste and waste pipes (A) Vitreous china. including 15 mm

dia Pillar tap and Stop cock (II) Flat back washbasin 550 mm

x 400 mm size (I) in white or colour.

[68] Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm 2.000 Nos. 5648.790

thick with over all size 610 x 460 mm & bowl size 560 x

x 200 with single hole for pillar tap Fixing in sanwich

platform including cutting holes and making goods the

same, 15 mm dia pillar tap. Stop cock 15 mm dia, necessary

fixtures, connections and waste pipes etc complete.

[69] Provision and fixing water closet squatting orissa type W.C. 1.000 Nos. 1288.940

pan size 580mm integral footrest and 100 mm P or S trap

and including 25 mm dia CP brass flush valve and GI inlet

connection etc. comp. (A) Vitreous china long pattern

white or color.

[70] Providing and fixing wash down water closet (European W. 3.000 Nos. 3119.860

C. pan) with integral "P" or "S" trap and PVC fushing

cistern with fittings etc comp incl plastic sheet cover

including jointing trap with pipe in cm 1:1 and connecting

cistern with closet & Jet spray heavy duty with S.S. Braided

hose 60 cm long & 2 No. 15 mm dia Stop cock (a) Vitreous

china in white or color.

[71] Providing and fixing urinal of approved quality connecting 2.000 Nos. 1242.100

the urinal with waste pipe, trap & 15 mm dia Stop cock etc.

complete. (A) White earthen ware flat back or corner type

size 430mm x 260mm x 350 mm.

[72] Providing erecting and fixing double coated Syntex or 5000.000 Ltr. 3.950

equivalent PVC. (ISI) mark water tank of reqd capacity each

with all necessary fittings & connection etc. comp on

[73] Providing and fixing 600 mm x 450 mm bevelled edge 3.000 Nos. 833.730

mirror of superior glass mounted on 6 mm thick plywood

sheet or PVC framing and fixed to wooden plugs with C.P

brass screw and washers.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[74] Providing and fixing C.P. brass towel rail complet with C.P. 5.000 Nos. 603.190

brass brakets fixed to wooden plugs with cpbrass screws

(B) 600 mm X 20 mm size.

[75] Providing and fixing S.W. Gully trap with C.I. Grating brick 4.000 Nos. 1292.190

masonary chamber and water tight C.I. Cover with frame of

300 mm. X 300 size (inside) with standard weight (I) Square

mouth traps (C) 100 mm. X 100 mm size P type.

[76] Constructing brick masonary chamber for under ground C.I. 12.000 Nos. 2932.930

Inspection chamber and bends with bricks having crushing

strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal dimensions,

total weight of cover with frame to be not less than 38 Kgs.

weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top

slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm. size ) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls & bed concrete etc. complete. (I) inside dimensions,

455 mm. x 610 mm. And 450 mm. Deep for single pipe line.

[77] Constructing brick masonary chamber for under ground C.I. 1.000 Nos. 3660.760

Inspection chamber and bends with bricks having crushing

strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal dimensions,

total weight of cover with frame to be not less than 38 Kgs.

weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top

slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm. size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls & bed concrete etc. complete. (II) Inside dimensions

500 mm. x 700 mm. & 450 mm. deep for pipe lines with

one or two inlets.

[78] Providing throating or plaster drip and moulding to R.C.C. 34.400 Rmt 41.000

[79] Providing and fixing in position 150 mm high, English 60.000 Nos. 454.500

letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer-in-charge with all necessary tools &

plants etc. complete.

[80] Constructing Sandwitch Platform of 18 mm thick Polished 13.500 Sqm 2897.570

Black Granite at top and 30 mm thick Kota stone slab

flooring fitting at bottom with cementing Materials /

adhsives including macking necessary grooves in walls

with Vertical Kotastone 30 mm x 2 No sandwitch thick

every 60 cm centre to cenre including all labour material of

approved quality incl. full moulded round front edge fixed

in wall for partition and jointed with grey cement slurry

including rubbing and polishing etc. complete .

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[81] Extra for additional height of propping and centering where 15.100 Sqm 390.340

the height of propping and centering exceeds 4.00 mt.

Between supporting floor two ceiling including temporary

brick or stone pillars for supporting as required. Height

4.00 m. upto 5.00 m.

[82] Providing and fixing 90 cm high Stainless steel railing made 16.900 Rmt 2317.230

from anticorrocive 304 grade S S pipe of 50 mm dia

(16Gauge) as hand rail with S S 304 grade Baluster 38 mm

as a vertical support fixed in RCC slab at 1.2 m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at eqal

distance including accessories as per detailed drawing as

directed etc. complete.

[83] SIGNAGES ON Door Providing, Fabricating & Fixing 304 11.000 Nos. 823.210

grade Stainless steel 1.5 mm thick brushed steel finish

plate fixed on a door using s.s studs and with punched

(laser cut) lettering carried out on S.S plate of required size

and text as directed by Engineer etc.complete. Size: 12" x

[84] Providing and fixing C.I. Manhole cover 0.60m x 0.45m size 3.000 Nos. 958.170

having weight not less than 35 kgs.

[85] Providing and fixing Stainless Steel Silver Folding Grab Bar 1.000 Each 2439.150

Handicap, For Washroom of standard quality as directed by

engineer in charge including all materials and labours etc

[86] Providing and Constructing a junction chamber of size 0.35 6.000 Nos. 1105.950

x 0.35 x 0.60 mt, including connecting rainwater pipes, half

brick work with plaster & C.C. 1:2:4 flooring bed 50mm and

covered with RCC slab 100mm thick incl. all labour,

material, excavtion etc. complete.

[87] Providing & Constructing filter chamber of size 2.06 x 1.21 x 1.000 Nos. 11351.390

1.20 mt. including connecting rain water pipes, half brick

work with plaster & C.C. 1:2:4 flooring bed 50mm and

covered with RCC slab 100mm thick incl. all labour,

material, excavation etc. complete.

[88] Providing & Constructing percolation sockwell of 2.54 mt 1.000 Nos. 50759.570

internal clear diameter and 5.00 mt depth including honey

comb brick masonary in C.M. 1:6, R.C.C. top slab of 10 cm

thick filling with gravel etc. complete incl. all labour,

material, excavation etc. complete.

[89] Excavation for foundation upto 1.5m depth including 11.700 Cum 261.730

sorting out and stacking of useful material i.e. disposing of

fthe excavated stuff upto 50 Meter lead.(A) Dense or hard

[90] Brick work using common burnt clay building brick shaving 3.000 Cum 4021.020

crushing strength not less than 35kg./Sq.Cm. in foundation

and plinthin Cement Mortar 1:6. (1-Cement : 6- fine sand)

(B) Conventional brick

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[91] Brick work using common burnt clay building brick shaving 22.700 Cum 4289.330

crushing strength not less than 35kg./Sq.Cm. in super

structure above floor two level in Cement Mortar 1:6. (1-

Cement : 6- fine sand)

[92] Providing 20mm thick cement plaster in Two coat on single 295.300 Sqm 297.960

or half brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand)

[93] Finishing wall with water proofing cement paint of on wall 295.300 Sqm 57.270

surfaces (Two coats to give an approved brand and

manufacture and of required shape even shade aftert

horoughly brushing the surface to remove all dirt and

remains of loose powered materials.

[94] Providing and fixing M.S. grills for stair railing 1.1 mt total 8.300 Sqm 2423.180

height, balcony railing etc. made of 12 mm size bright bars,

framed in M.S. flat 50x4 mm size at bottom & 50 mm Dia

G.I. pipe at top with PVC hand rail covered, braced with

bright bar design as per drawing at 30 cm c/c in vertical

intervals, welding bright bars in frame including cutting,

transportation, primer & oil painting, fixing in position etc.

[95] Providing and Fixing FIRE EXTINGUISHER 4 KG ABC 8.000 Nos. 3535.000

including cost of labour complete with providing 1 year

guarantee for each bottle including testing and

[96] Providing and Fixing FIRE EXTINGUISHER 2.0 KG CO2 8.000 Nos. 5353.000

including cost of labour complete with providing 1 year

guarantee for each bottle including testing and

[97] Drilling of 165 dia. Bore hole in overburden strata ( lime 107.000 Rmt 756.490

stone & yellow sticly clay formation by DTH ring up to

requird depth 6.00 mt. including fixing 180.00 dia. PVC

pipes ( blank and slotted ) if requierd uther drilling of

165.00 mm dia. Bore hole in hard rock strata by DTH driling

method up to total depth of 165.00 mt. incl. measureing

the yield by "v" notch and flushing of bore etc. complete.

(a) 0.0 to 300 mt. ( 165.00 mm dia bore )

[98] Providing and supplying in standard length ISI mark rigid 6.000 Rmt 1458.440

unplasticised PVC pipes suitable for casing with ring fit joint

including cost of rings as per IS specification no 4985/1988

including all ocal and central taxes transportation, freight

charges, octroi, inspection charges, loading unloading,

conveynce, to market and including cost of jointing

meterial etc complete for following dia. & ring fit type pipe.

(B ) Test pressure 6.00 Kg / Cm2 with excise duty. ( 7 )

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[99] Supplying, Fixing, Installation & Testing of approval make 1.000 Nos. 28797.120

electric motor driven submersible pump set confirming to

IS 8034 / 198 / AND motor confirms to IS 9283 /

working at 3-phase 400 / 440 volt, 50 C/S A.C Supply and

2900 R.P.M for 6" Dia.Bore well. ( 2 ) 180 mt Head, &

[100] PVC insulated flat submersible cable as per detailed 120.000 Rmt 87.870

technical specifications of R/C of GWSSB conforming to IS

[101] Providing and supplying in standard length ISI mark high 107.000 Rmt 263.610

density polythylene H.D.P.E pipes suitable for potable

water as per ISI specification No. 4984/1995 including all

local and central taxes, transportation, freight charges,

octroi, inspection charges, loading unloading, conveynce to

the departmental stores etc.complete. (a) 10 kg / cm2

[102] Providing and supplying control panel Board for sub. Pump 1.000 Nos. 9219.280

detailed specification as per GWSSB RIC S.D.Form 8 to

[103] Geohydrological ground water investigation including 1.000 Nos. 14428.860

vehicle charges.(C) For open well including water sample

testing charges

[104] Construction of granular Sub base by providing GSB Grade- 53.200 Cum 1062.290

V coarse graded material BTMC using aggregate 26.5 mm

to 9.5 mm @ 64%, 9.5 mm to 4.75 mm @ 11% and stone

dusts 4.75 mm and below @ 25% incl. spreading in

uniform layers with motor grader on prepared surface

mixing by mix in place method with rotavator at OMC and

compacting with vibratory roller to achieve the desired

density complete as per Clause 401.2 Table

[105] Providing and laying spreading and compacting graded 64.500 Cum 965.190

stone aggregate to wet mix macadam 125 mm thick as per

MORT&H specification including pre mixing the material

with water at OMC in mechanical mix plant, carriage of

mixed material by tippers to site, laying in uniform layers

with paver in sub base/ base course on well prepared

surface and compacting with vibratory roller to achieve the

desire density.

[106] Providing and casting in situ controlled cement concrete M- 49.600 Cum 4391.230

150 mix for well steining including, necessary shuttring,

laying vibrating and curing complete.

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[107] Providing and cast in situ vaccum De-watered unireinforced 96.000 Cum 6444.930

cement concrete of Grade M-25-Trimix floring for average

25 cm thick wearing coat / C.C. pavement laid as directed in

approved side form work including vibrating by needle

vibrator and leveling with trimix, surface vibrator, Vaccum

De-watering with trimix vaccum pump, floating and further

compaction, and finished in continous operation including

cutting the concrete with concrete cutting machine for

contraction joints at every 4.00 mtr. and expansion joint at

interval of 40 mtr. of size 6 x 12 mm to 12 x 25 mm deep or

as specified/providing stripped/broom finish evenl,

applying debonding strips, bitumen primer, bituminous

sealant, separation membrane and curing etc. complete.

[108] Steel work, welded in built up sections framed work 16.300 Qtl 9725.850

including cutting, hoisting,fixing in position and applying a

priming coat of red lead paint. (D)In trusses and trussed

purlins, upto 25 M. span and 15 M. ovarall height.

[109] Providing corrugated G.I. sheets roofing fixed with 82.000 Sqm 727.130

galvanized iron "J" or "L" hooksbolts and nuts 8mm

diameter with bitumen and G.I. limpet washers, filled with

white lead complete excluding the cost of purlins rafters

and trusses (1) 0.80mm thick sheet

[110] Applying priming coat over new steel and other metal 24.500 Sqm 35.170

surface after over and including preparing the surface by

thoroughly cleaning oil, grease dirt and other foreign

matter and scoured with brushes fine steel wool, scrapers

and sand paper with ready mixed priming paint brushing

Item Description of Item Quantity Unit Rate In Amount

No. (with brief specification and reference to book of figures

specifications)

[111] Painting two coats (excluding priming coat) on new steel 44.800 Sqm 87.810

and other metal surface with enamel paint brushing,

interior to give enamel paint brushing,interior to give an

even shade including cleaning the surface of all dirt, dust

and other foreign matter

Rupees Ninety Eight Lakh(s) One Thousand Two Hundred Six And Paise Thirty Nine Only

I/ We am/are willing to carry out the work at___________________________________ % above / below percent

(should be written in figure & words) of the estimated mentioned above. Amount of my / our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct____________% Below Deduct____________% Above

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

5. Credit of dismantled materials of amount of Rs.0.00 must be recovered from 1st R.A. bill of Contractor's.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be included in the

rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

7. Payment will be given only if the material testing result is satisfactory.Testing of material shall be done as per

statement attached with specification.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. (R & B) Sub-Division, (R&B) Division,