ADDITION / ALTERATION AND SPECIAL REPAIRS TO FAMILY WELFARE CENTRE

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L for Hard-core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and directed. .

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type-C1 (1:3:6) using 20mm graded aggregate and setting in mortar 1:6, complete all as specified and directed.

M&L for rendering 8 mm thick CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6. mm on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. . Note:-WPC will be measured and paid separately. Dosage of WPC shall be as per manufacturer's instruction.

Supply only Integral waterproofing compound

M&L for preparation of new plastered external surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block 60mm thick ,M-35 Grade of any shape and size conforming to IS 15658-2006 of with grey cement and pigment complete all as specified and directed. ..

M&L for cement concrete 1:2:4, type B-O using 12.5 mm graded crushed stone aggregate as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Removing excavated soil to a distance exc.250m but n.exc 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm of soft/loose soil complete all as specified and directed.

M&L Plain cement concrete 1:4:8, Type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

S&F MS plates (plain) 5 mm thick cut to required size and welded to GI pipe etc complete all as specified and as directed.

M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc (Fe 410W,Gde E-250,quality A) and welding/ bolting the chequered plates to the frame etc complete all as specified and as directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10 cm but n exc 15 cm and dia of neck 11 to 15 mm complete all as specified and as directed.

M&L for roof trusses (framed ), trussed purlins and fastenings and heavy bracket framing ( Beam, tee, angle, channel or plate sections) including distance pieces, cleats etc (Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 10 mm thick in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (600 x 600mm joint free in skirting/ risers over and including cement backing coat 10 mm thick in CM 1:3 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured as in vertical surfaces, size 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set in cement screed bed 10mm tkick 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for 100mm thick Cement concrete type 1:4:8 D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 75mm thick Cement concrete type 1:2:4 B1, using 20mm graded stone aggregate complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for Pre-cast cement concrete block masonry with solid blocks type B1, 1:2:4 (20 mm graded aggregate), exc. 10 cm in width and setting in 1:4 cement mortar, complete

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering in CM 1:6, 10mmm thick on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement all as specified and directed.

Taking down chowkats or frames (wooden / steel/ PVC) of area exc 1.5 sqm but n exc 4 Sqm without taking off shutters from the frame complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 Sqm each, but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F for powder coated aluminium frame work for doors, openable / sliding windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. Complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F for powder coated aluminium door shutters with aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.complete all as specified and directed. Note: Prelaminated particle board, sheet glass , wire mesh etc shall be measured and paid separately.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty square n.exc 5 sqm in each pane complete all as specified and directed.

S&F4.8 mm thick sheet glass ordinary quality and glazing with oil putty square n.exc 5 sqm in each pane complete all as specified and directed.

M&L for 9 mm thick Prelaminatd particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F aluminium powder coated dark coloured deco grill 75 mm aperture, made out of 7.5 mm plate and finished deco grill will have 7.5 mm width and 6 mm thick with rubber beading & looks etc

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty square n.exc 5 sqm in each pane complete all as specified and directed.

S&F Door closer cast iron body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per SSR specification & drawing complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, as per SSR specification & drawing complete.

M&L for painting to old wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for painting to old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed

S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F extruded aluminium anodised handle 150 mm fabricated type polished and fixed with stainless steel screws.

S&F stainless steel butt hinges of size 100mm size complete all as specified and as directed

M&L for 100 mm Aluminium anodised barrel tower bolts of extruded section rolled and fixed with stainless steel screws. All as specified

S&F in repairs for Vitreous China wash down water closet pan (pedestal pattern), with jet spray white with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, white all as specified excluding flushing pipe and waste pipe complete all as specified and as directed

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm including 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), chain and plug and porcelain stopper , brackets including cutting for and pinning in ends of brackets or erecting stand, PVC connections 15mm size with PTMT nuts of length 600mm and waste pipe , complete all as specified and as directed.

S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed..

S&F PVC connection 16mm outer dia, 450mm long for cold water with brass union on both sides to suit 15mm dia pipe complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down old for height upto 12 mtr complete all as specified and as directed..

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down old for height upto 12 mtr complete all as specified and as directed..

S&F 75 mm dia PVC (SWR) bends single socketed in any length, with rubber rings complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends single socketed in any length, with rubber rings complete all as specified and as directed.

S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or un equal complete all as specified and as directed.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or un equal complete all as specified and as directed.

S&F in repairs PVC SWR floor trap plain 75mm dia with grating including jointing with solvent cement complete all as specified and as directed.

M&L for complete removal of existing surface treatment (internal surface), applying 3mm thick wall care putty on old plastered surface as per manufacturer instruction and applying two coats of distemper oil emulsion over a coat of primer (preparatory to distemper) complete all as specified and directed.

M&L for preparation of new plastered surface of wall, applying 3mm thick wall care putty as per manufacturer instruction and applying two coats of distemper oil emulsion over a coat of primer (preparatory to distemper) complete all as specified and directed.

M&L for preparation of old surfaces of ceiling by brooming down or by steel wire brushing and applying two coats of white wash complete all as specified and directed.

M&L for old treated internal surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed. Make: Asian apcolite premium or any other make equivalent product from the list of manufacturer.

M&L for one coat of French polishing on old treated wooden surfaces of any description, width or girth complete all as specified and directed.

Supply and laying 25mm outer dia high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings, fixed to walls/floors /ceiling or concealed in wall and jointed with yellow solvents cement including taking down old unserviceable CPVC/GI tubing complete all as specified and directed.

Supply and laying 20mm outer dia high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings, fixed to walls/floors /ceiling or concealed in wall and jointed with yellow solvents cement including taking down old unserviceable CPVC/GI tubing complete all as specified and directed.

S&F in repair 25mm bore CPVC Ball brass valve with high pressure with polythene ball of size 6" dia and fly nut including taking down the old unserviceable one complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 2000 litre capacity including making holes for inlet and outlet including taking down old tank complete all as specified and directed .

S&F in repair 25mm dia float valves of synthetic (PVC) high pressure with polythene ball of size 6" dia and fly nut complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade ISI marked with valid CML No. single core multistranded cable in and including medium grade concealed PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No. (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 2 mm thick MS sheet/ pressed steel sunken boxes (earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light / fan point controlled by one switch, all as specified and as directed.

All as per item No. 73 here in before but for One ceiling fan point controlled by one ,one way switch and regulator / exhaust fan point controlled by one switch.

All as per item No. 73 here in before but for one 5 pin 5 amps socket outlet on same board .

All as per item No. 73 here in before but for one 5 pin 5 amps socket outlet an independent board.

All as per item No.73 here in before but with 2.5 sqmm (copper conductor) cable for wiring and 2.50 sqmm cable as earth continuity conductor for one 6 pin 15 Amps switch socket outlet on independent board

All as per item No.73 here in before but with 4.0 sqmm (copper conductor) cable for wiring and 4.0 sqmm cable as earth continuity conductor for sheet metal enclosure

S&F Switch piano flush type 5 Amps single pole, one way,230 volts all as specified and as directed.

S&F Switch Modular type 1 way 6A, 1 module complete all as specified and as directed.

S&F Switch socket combination, 5 pin, 5 Amps ISI marked, flush type all as specified and as directed.

S&F Switch socket combination, 5/6 pin 15 Amps flush type multi purpose all as specified and as directed.

S&F Ceiling rose surface bakelite 65 x 50mm, three terminal AC 230 volts 50 Hz complete all as specified and directed.

S&F Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make:- Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent model of other manufacturers from the list.

S&F Focus light fitting,18 W, energy saving including all electrical connection from ceiling rose to light fitting complete all as specified and directed. Make:- Luker Cat Part No. LSP18 or equivalent model of other manufacturers from the list.

S&F LED down lighter 2'x2' , 36 W ,all as specified and directed. Make:- Crompton Cat Part No. LCTLRNE-36-FO-CDL or Philips/Wipro or equivalent model of other manufacturers from the list.

S&F LED Tube light fitting 40w ,4 ft with extruded aluminium batten for continuous operation connected accessories complete all as specified and directed. Make: Philips Cat Part No BN100C LED40S-6500 PSU L120 GR/CG/WIPRO or equivalent model of other manufacturers from the list.

Supply and fixing LED floodlight luminaire with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP 66, 50 watt,50 HZ with all necessaries connection and outer covering with necessaries flexible pipe ,monitoring arrangement complete as directed by EIC Make:- CG cat No LFL-50-CDL/60-M or equivalent model of other manufacturers from the list.

S&F Ceiling fan 230 V, 1200 mm sweep.5 star rated complete with 300 mm/450 mm long hanging Rod and accessories . Make:- cat part no. Efficiencia Neo (BLDC 32W) of Havells or CG Cat Part Energion HS BLDC or equivalent model of other manufacturers from the list.

S&F wall mounted air circulators metallic body, 300 mm sweep, 1440 rpm with fixing arrangements on wall including screws, rowel plugs etc. connecting to the electrical system all as specified and directed. Make: Havells Cat Part No. Swing or equivalent model of other manufacturers from the list.

S&F in repair heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, 900 rpm complete all as specified. Make:- Turbo jet SP of Havells or equivalent model of other manufacturers from the list. . Note:- Old exhaust fans shall be deposited to MES store yard. Quoted rate shall be inclusive of the same.

S&F fan regulator electronic step type, modular type, 120 W, 2 module complete all as specified and as directed.

S&F MCB TPN 63Amps,415 Volt, complete all as specified and directed. Make:- Cat Part No. BB40630B of L&T or equivalent model of other manufacturers from the list.

S&F in repair Sheet Metal Enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,240 volts ,50 Hz including taking down old one.

S&F sheet metal enclosure for DBs and MCBs to be used double door type, SPN 8 way with 200 Amps rated busbar of 240 Volts single phase.

S&F SPN MCB 6 to 32 Amps, 230 Volt, 50 Hz, 10 KA 'B' curve all as specified and directed. Make:- Cat Part No. BB20060B to BB20320B of L&T or equivalent model of other manufacturers from the list.

S&F SP MCB 6 to 32 Amps, 230 Volt, 50 Hz, 10 KA 'B' curve all as specified and directed. Make:- Cat Part No. BB10060B to BB10320B of L&T or equivalent model of other manufacturers from the list.

M&L for sub main wiring using proper colour coding 1100 Volts grade with two runs of single core 4 Sqmm (FRLSH) multistranded copper conductor PVC unsheathed cable drawn through and including PVC conduit medium grade of not less than 20 mm dia concealed in wall/floor including cutting chasses and making good the wall/ceiling / floor for sub main connection including 4.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed Note : Three runs of 4 Sqmm (FRLSH) copper conductor and one run of PVC conduit with accessories shall be measured as one unit length).

M&L for sub main wiring using proper colour coding 1100 Volts grade with 4 runs of single core 10 Sqmm (FRLSH) multistranded copper conductor PVC unsheathed cable drawn through and including PVC conduit medium grade of not less than 25 mm dia concealed in wall/floor including cutting chasses and making good the wall/ceiling / floor for sub main connection including 10 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed Note : Six runs of 10 Sqmm (FRLSH) copper conductor and one run of PVC conduit with accessories shall be measured as one unit length).

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iron strip 25x4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 of SSR Part-I connected to earthing test pit all as specified or indicated including provn of necessary excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI light grade protection pipe , common salt, charcoal dust, returning, filling in of soil, removal of soil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounded from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electrode connected by using GI wire 4 mm dia (max length of 7.5 mtrs) by means of bolts, nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main control board / test point and provided with GI pipe of medium grade 20 mm bore for watering and including funnel, wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion .

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches / ducts/Wall of size 2 core 10 Sqmm all as specified and directed :

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32 x 6mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 5 connected to earthing test point complete all as specified and indicated including testing on completion. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber,RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh complete all as specified and directed.

S&F Aluminium strip 25 x 3.15mm with porcelain insulators, saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and as directed.

S&F Air termination, single pointed, copper rod 12mm dia and 300mm long all as specified and as directed.

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal headed screw all as specified and as directed.

M&L Galvanised iron strip 32 x 6mm saddles and fixing screws etc buried in ground all as specified and as directed.

ST ANTONY CONSTRUCTIONS

WELTRONENGINEERINGSERVICES

M-TECH ENGINEERS

SUKU CONSTRUCTIONS

ANIE JOHN CONTRACTORS

K.V.GEORGE AND COMPANY

M/s Antony Kallarakkal