REPAIR TO BOUNDARY WALL, DRAIN, CULVERTS, PATH, FENCING, ROLLING SHUTTER IN TECHNICAL AND RESIDENTIAL AREA AT DEAL UNDER GE(I) RND DEHRADUN

Amount

Dismatling of barbed wire of any description of any position complete all as specified and directed.

Dismatling of Concertina coil of any description in any position all as specified and directed

Dismanting wrought iron or mild steel work of any description as in angle /grill etc.complete all as specified and directed.

Demolition of brick work/ stone masonry of any description built in cement mortar.

Demolition stone slabs and tiles of any description or thickness in floors, approns etc,laid bedded and pointed in any mortar incl PCC complete all as specified and directed.

Demolition of cement concrete (unreinforced) of anay description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

Demolition of ( reinforced) cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any position not otherwise specifically provided for complete all as specified an directed.

Dismantling of cast iron or reinforced cement concrete drain pipe, jointed in in cement mortar and taking out trenches if required for 300 mm internal dia of pipe complete all as directed

M&L for reiinforced Precast cement concrete(1:2:4) type B-1 (using 20 mm graded stone aggregate) as in landing , cover slab (for manholes, shelves), chullah hoos, chajjas, water troughs , mangers, shelves an similar articles with plain faces incluing necessary form work , & set in Cement Mortar ( 1:4 ) in complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M&L for Mild Steel TMT bar, 10 mm dia & over, cut to length, bent to shape require, incluing cranking , bending spirally for hooping for columns ,hooking endsa and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc, complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in coping and benching of Brick wall,drain etc including weathering, slightly rounded or chamfered angles and throating as directed.

Fixing only mild steel angle iron in fencing posts, fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality. complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165.complete all as specified and directed. Note (ii) :- Work will be carried out upto 6 story in necessary scafolding and safety measures and labour insourance etc complete.

S&F mild steel angle iron in fencing posts, fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed..

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed.

M&L for restraining and resecuring including making good staples Concertina coil of any description on top of wall complete all as specified and directed.

S&F concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

Ditto all as above item No.20 but except stone complete all as specified and directed.

Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for random rubble masonry uncoursed or brought upto coursed against dressed surface not exc 40mm complete all as specified and directed.

M&L for raised pointing to random rubble or polygonal rubble masonry uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

M&L for cement concrete type C1 (1:3:6) 20mm graded stone agg as in bonders (for stone walling) and setting the block slab etc in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cm 1:4 with WPC on fair face of brick work and concrete including finishing fair and even complete all as specified and directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc in Cement mortar complete all as specified and directed.

M&L for Dubbing out average 10 mm thick on irregular face of wall in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cm 1:4 on other than fair face of brick work or stone masonary including finishing fair and even complete all as specified and directed..

M&L for preparation of new plastered surfaces of walls and concrete work and applying two coats of cement based paint over a coat of Primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and concrete work and applying one coats of cement based paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

M&L forpreparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed..

M&L for providing PCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in bed plates for angle ,and similer items incl necessary form work complete all as spd and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base for tile or drain and for mass concrete complete all as spd and directed.

M&L for roubber moulded chequered cement concrete tiles coloured (in two different colour) 30x30cmx25mm thick, with grey cement and pigment set and jointed and pointed in neat cement slurry in floors incl and over 15 mm thick screed bed in CM 1:6 complete all as spd and directed.

M&L for providing 75mm thick PCC (Cement concreteP1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair incl making expansion joints and filled with bitumen and sand complete all as specified and directed

M&L providing 100mm thick PCC (cement concrete) 1:2:4 etc type B-2 (using 40 mm graded stone aggregate ) pavement/ramp/floor finsihed even an smooth without using extra cement complete all as specified and directed

S & F in repair 1.25mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, haps and staple and one shop coat of primer erected in position as indicated, complete : push pull or manual type complete all as spd and directed

S&F in repair 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed..

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in surface channels drain complete all as specified and directed.

M&L for extra for forming fair finished drain or channel as inner girth in cement concrete using extra cement including form moulds mitred/stopped ends etc. complete all as specified and directed.

M&L for removing the plants/ vegetation upto Six story height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) including necessary scaffolding etc wk will be carried out upto 6 th storey complete all as specified and directed.

M&L reinforced concrete pipes, Class NP-2 laid and jointed complete with coller of dia 450mm complete all as specified and directed.

S & F Stainless steel pipe Ralliing of 50 mm bore vertical poles and hand rails, 02x25 mm bore in horizontal rails and c/c distance of verticale poles is not more than 600 mm steps, stair case landing/ roof railing and fixed including necessary fitting/ fixture or manufacturer instruction complere all as specified and directed. Note:- Minium

Dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

OM TRADERS

VEE AAR Builders and contractors

JS CONSTRUCTION COMPANY

Amit Associates

M/s badrinath Traders